Suitport

A man disconnecting from a suitport mockup during field tests
An astronaut entering a spacesuit through a suitport

A suitport or suitlock is an alternative technology to an airlock, designed for use in hazardous environments and in human spaceflight, especially planetary surface exploration. Suitports present advantages over traditional airlocks in terms of mass, volume, and ability to mitigate contamination by—and of—the local environment.

Operation

In a suitport system, a rear-entry space suit is attached and sealed against the outside of a spacecraft, space habitat, or pressurized rover, facing outward. To begin an extra-vehicular activity (EVA), an astronaut in shirt-sleeves first enters the suit feet-first from inside the pressurized environment, and closes and seals the space suit backpack and the vehicle's hatch (which seals to the backpack for dust containment). The astronaut then unseals and separates the suit from the vehicle, and is ready to perform an EVA.[1][2][3]

To re-enter the vehicle, the astronaut backs up to the suitport and seals the suit to the vehicle, before opening the hatch and backpack and transferring back into the vehicle. If the vehicle and suit do not operate at the same pressure, it will be necessary to equalize the two pressures before the hatch can be opened.

Advantages

Suitports carry three major advantages over traditional airlocks. First, the mass and volume required for a suitport is significantly less than that required for an airlock. Launch mass is at a premium in modern chemical rocket-powered launch vehicles, at an estimated cost of US$60,000 per kilogram delivered to the lunar surface.[4]

Secondly, suitports can eliminate or minimize the problem of dust mitigation. During the Apollo program, it was discovered that the lunar soil is electrically charged, and adheres readily to any surface with which it comes into contact, a problem magnified by the sharp, barb-like shapes of the dust particles.[5] Lunar dust may be harmful in several ways:

During the Apollo missions, the astronauts donned their space suits inside the Apollo Lunar Module cabin, which was then depressurized to allow them to exit the vehicle. Upon the end of EVA, the astronauts would re-enter the cabin in their suits, bringing with them a great deal of dust which had adhered to the suits. Several astronauts reported a "gunpowder" smell and respiratory and/or eye irritation upon opening their helmets and being exposed to the dust.[5]

When the suit is attached to the vehicle, any dust which may have adhered to the backpack of the suit is sealed between the outside of the backpack and the vehicle-side hatch. Any dust on the suit that is not on the backpack remains sealed outside the vehicle. Likewise, the suitport prevents contamination of the external environment by microbes carried by the astronaut.

Additionally, the suitports significantly reduce the ingress and egress time, and virtually remove the need of pumpdown of the airlock, which normally is either associated with air loss, or requires heavy and complex pumping machinery as the only space that needs to be pressurized is the area between the vehicle hatch and the life-support backpack, and even that only in case of need for repairs, decontamination and refitting of the suit.[1][3]

Development and use

Suitport concept being tested with the Z-1 prototype spacesuit in 2012

A patent for a suitport was first filed in 1987 by Marc M. Cohen of NASA's Ames Research Center.[8] Further patents were filed in 1996 by Philip Culbertson Jr.,[1] and in 2003 by Joerg Boettcher, Stephen Ransom, and Frank Steinsiek.[2]

As of 1995, suitports have found a practical, terrestrial application as part of a NASA Ames hazardous materials vehicle, where the use of the suitport eliminates the need to decontaminate the hazmat suit before doffing.[9] A suitport prototype built by Brand Griffin has been used in a simulated lunar gravity test on board NASA Johnson's C-135 aircraft.[9]

Suitports may find use as part of future NASA projects aimed at achieving a return to the Moon and manned exploration of Mars. NASA's conceptual Space Exploration Vehicle has two suitports on the back of the craft.

Testing has been taking place in combination with the Z-1 prototype spacesuit inside NASA's human-rated thermal vacuum chamber B at the Johnson Space Center.[10] Early unmanned tests of the suitport were conducted in June 2012.[11][12] The first manned tests of the suitport occurred on 16 and 18 July 2012; during these manned tests the spacesuit was kept at a pressure of 14.7 psi (1 atm) with the chamber pressure at approximately 6.5 psi (0.44 atm), equivalent to an altitude of 21,000 feet (6,400 m).[12] Future manned tests were planned for September and August 2012, where NASA planned to keep the spacesuit at a pressure of 8 psi (0.5 atm) and the vacuum chamber at roughly 0 psi (0 atm).[12] Suitports may eventually be tested on the International Space Station.[13]

See also

Wikimedia Commons has media related to Suitport.

References

  1. 1 2 3 Culbertson, Philip, Jr. (1996-09-30). "Suitlock docking mechanism — United States Patent 5697108". freepatentsonline.com. Retrieved 2006-06-15.
  2. 1 2 Boettcher, Joerg; Stephen Ransom; Frank Steinsiek (17 July 2003). "Apparatus and method for putting on a protective suit — United States Patent 6959456". freepatentsonline.com. Retrieved 2006-06-15.
  3. 1 2 "Docking Fixture and Mechanism for a Protective Suit". NASA Tech Briefs. NASA. March 1, 2003. Retrieved 2006-06-15.
  4. "Earth to Lunar CELSS Evolution" (PDF). Proceedings of the NASA/USRA Advanced Design Program 7th Summer Conference. University of Colorado. pp. 123–132. Retrieved 2006-06-15.
  5. 1 2 David, Leonard (November 7, 2006). "Lunar Explorers Face Moon Dust Dilemma". Space.com. Retrieved 2008-06-15.
  6. Park, J.S.; Y. Liu; K. D. Kihm; L. A. Taylor. "Micro-Morphology And Toxicological Effects Of Lunar Dust" (PDF). Lunar and Planetary Science XXXVII (2006)-. Retrieved 2007-03-08. The particle size distribution of the lunar dust from Apollo 17 sample 77051 has been determined using SEM imaging analysis. The size-distribution data features an approximate Gaussian distribution with a single mode at around 300-nm. The reactivation surface area of highly porous “Swiss-cheese” particles is about 26% higher than a sphere. The morphologies of dust grains have been classified based upon their four types: 1) spherical; 2) angular blocks; 3) glass shards; and 4) irregular (ropey or Swiss-cheese). These data will assist the medical researchers in their studies of the toxicological effects of inhalation of lunar dust by humans.
  7. Young, Kelly (6 March 2007). "Lint rollers may collect dangerous Moon dust". New Scientist. Retrieved 2008-02-17. While hailed as a potential source of oxygen and metals, Moon dust is a concern because doctors fear the smallest grains could lodge in astronauts' lungs, possibly causing long-term health effects.
  8. "Suitport extra-vehicular access facility". United States Patent and Trademark Office. 27 June 1988. Retrieved 17 December 2012.
  9. 1 2 Cohen, Marc M. (April 3–5, 1995). "The Suitport's progress" (PDF). Life Sciences and Space Medicine Conference. Houston, Texas: American Institute of Aeronautics and Astronautics. Retrieved 2008-11-19.
  10. "ISS Update: Suitport Testing". NASA. 7 June 2012. Retrieved 27 July 2012.
  11. "ISS Update: Suitport". NASA. 7 June 2012. Retrieved 28 July 2012.
  12. 1 2 3 "ISS Update: Testing the Suitport". NASA. 19 July 2012. Retrieved 27 July 2012.
  13. Williams, Catherine (August 2011). "Coming to a center near you: Advanced Exploration Systems" (PDF). NASA. Retrieved 27 October 2011.
This article is issued from Wikipedia - version of the Sunday, November 15, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.