Sunbeam Bomber

Sunbeam Bomber
Role Bomber
National origin United Kingdom
Manufacturer Sunbeam Motor Car Company
First flight 1917
Produced 1


The Sunbeam Bomber was a prototype single-engined, single seat bomber aircraft of the First World War. Only one example flew as the type proved to be unsuccessful and was abandoned.

Design and development

Following the outbreak of the First World War, the Sunbeam Motor Car Company became a major supplier of licence-built aircraft for the Royal Naval Air Service (RNAS), in addition to its existing work as a designer and builder of aero-engines and motor vehicles.[1][2] In November 1916, a requirement for a single-engined, single-seat bomber was issued on behalf of the RNAS,[3] and when Sunbeam decided to design an aircraft to respond to this specification, it received an order for two prototypes from the Admiralty.[2]

Sunbeam's design was a two-bay biplane of conventional tractor configuration. It was powered by one of Sunbeam's own Arab V8 engines rated at 200 horsepower (150 kW) and driving a two bladed propeller. The aircraft's fuel tanks were located in the fuselage at the aircraft's centre of gravity, which resulted in the pilot's cockpit being well behind the wings (and 13 feet (4.0 m) behind the nose). Racks for three 100 lb (45 kg) bombs were fitted under the wings, while a single forward-firing synchronized Vickers machine gun was mounted above the aircraft's engine.[2][4]

The first prototype, serial number N515 first flew at Castle Bromwich in late 1917, but exhibited a number of problems. The Puma engine, despite being ordered in large numbers, was unreliable and suffered from severe vibration, which considerably delayed service testing. The aircraft's layout, with the pilot sitting so far aft, gave him a poor view, and sitting 8 feet (2.4 m) away from the Vickers gun, could no nothing to resolve any gun stoppage. When eventually formally tested, in August 1918, it proved to be heavier and carry fewer bombs than the private venture Sopwith B.1 of similar concept.[4] The second prototype was abandoned before it was completed, and no orders were placed either for the Sunbeam or the Sopwith,[5] which were incapable of defending themselves against attacking enemy fighters[6] Existing two-seat aircraft such as the Airco DH.4 better met the RNAS's (and later the Royal Air Force's) requirements.[7]

Specifications

Data from British Aeroplanes 1914–18[8]

General characteristics

Performance

Armament

See also

Aircraft of comparable role, configuration and era

Notes

  1. ↑ Bruce 1957, p. 637.
  2. 1 2 3 Mason 1994, p. 83.
  3. ↑ Bruce 2001, p. 4.
  4. 1 2 Bruce 1957, pp. 637–638.
  5. ↑ Mason 1994, pp. 82–83.
  6. ↑ Bruce 2001, p.5.
  7. ↑ Mason 1994, p. 81.
  8. ↑ Bruce 1957, p. 638.

References

  • Bruce, J. M. (1957). British Aeroplanes 1914–18. London: Putnam. 
  • Bruce, J. M. (2001). Sopwith B.1 & T.1 Cuckoo: Windsock Datafile 90. Berkhamsted, Hertfordshire, UK: Albatros Publications. ISBN 1-902207-41-6. 
  • Mason, Francis K. (1994). The British Bomber since 1914. London: Putnam Aeronautical Books. ISBN 0-85177-861-5. 
This article is issued from Wikipedia - version of the Tuesday, June 23, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.