Syntegra
Syntegra is a bogie developed by Siemens incorporating an axle mounted gearless electric drive in an inside wheel bearing bogie.
The design was unveiled at Innotrans in 2006, and began service trials in 2008 on the Munich U-Bahn.[1][2]
History and design
The motor design is a hermetically sealed simple co-axial gearless synchronous motor (a permanent magnet, three phase drive, passively cooled design); the motors can also be used for electrical dynamic braking, and also as an active electric brake.[1][3] The wheelset bearings are mounted on the inside of the wheels and support both motor, axles and wheel. A traction link from motor to the vehicle frame transmits tractive forces.[3]
The bogie frame has a single central cross member which supports via pivots two longitudinal beams (in a 'weighing scale' arrangement) connected to the wheelset via the primary suspension.[3] The cross member supports the vehicle body via the secondary suspension of two outside air springs.[1]
In mid-2006 prototype motors rated 110 kW, with claimed 96% efficiency, were fitted to an ex-Munich U-Bahn vehicle for testing at the Wegberg-Wildenrath test circuit.[4] In 2008 a train fitted with two Syntegra bogies began in service tests on the Munich U-Bahn.[5]
A 150 kW prototype was displayed at Innotrans (2009), the prototype bogie weight was 5.6t, with a 1.6m wheelbase and a maximum axleload of 14t.[1]
References
- 1 2 3 4 Hondius, Harry (1 November 2006), "Syntegra revives the gearless drive", www.railwaygazette.com (Railway Gazette International)
- ↑ "Syntegra gearless bogie enters service". www.railwaygazette.com (Railway Gazette International). 13 August 2008. Retrieved 2008-08-20.
- 1 2 3 "Syntegra : The complete integration of traction, bogie and braking technology" (PDF), www.mobility.siemens.com (Siemens)
- ↑ "Gearless motor", www.railwaygazette.com (Railway Gazette International), 1 August 2006
- ↑ Siemens’ Syntegra bogie premiers at the Munich Metro, Siemens, 18 August 2008
Literature
- Joeckel, A.; Lowenstein, L.; Teichmann, M. (2006), "Syntegra – Innovatives Triebfahrwerk mit Direktantrieben", Glasers Annalen (in German) (ZEVrail) 130 (9): 368–379, ISSN 1618-8330
- Germishuizen, J.; Jockel, A.; Hoffmann, T.; Teichmann, M.; Lowenstein, L.; v.Wangelin, F. (2006). "SyntegraTM - next generation traction drive system, total integration of traction, bogie and braking technology". International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006. p. 1073. doi:10.1109/SPEEDAM.2006.1649927. ISBN 1-4244-0193-3.
- Lowenstein, L.; Joeckel, A.; Hoffmann, T.; Körner, O.; Teichmann, M.; v.Wangelin, F., "Syntegra – The intelligent Integration of Traction, Bogie and Braking Technology" (PDF), www.uic.org (Siemens)
External links
- "Syntegra - The complete integration of traction, bogie and braking technology", transportation.siemens.com (Siemens), archived from the original on 29 September 2009