Synthetic antibody

Synthetic antibodies are affinity reagents generated entirely in vitro, thus completely eliminating animals from the production process.[1] Synthetic antibodies include recombinant antibodies, nucleic acid aptamers and non-immunoglobulin protein scaffolds. As a consequence of their in vitro manufacturing method the antigen recognition site of synthetic antibodies can be engineered to any desired target and may extend beyond the typical immune repertoire offered by natural antibodies.[2] Synthetic antibodies are being developed for use in research, diagnostic and therapeutic applications. Synthetic antibodies can be used in all applications where traditional monoclonal or polyclonal antibodies are used and offer many inherent advantages over animal-derived antibodies, including comparatively low production costs, reagent reproducibility and increased affinity, specificity and stability across a range of experimental conditions.[3]

Recombinant Antibodies

Recombinant antibodies are monoclonal antibodies generated in vitro using synthetic genes. Recombinant antibody technology involves recovering the antibody genes from the source cells, amplifying and cloning the genes into an appropriate vector, introducing the vector into a host, and achieving expression of adequate amounts of functional antibody. Recombinant antibodies can be cloned from any species of antibody-producing animal, if the appropriate oligonucleotide primers or hybridization probes are available.[4] The ability to manipulate the antibody genes makes it possible to generate new antibodies and antibody fragments, such as Fab fragments and scFv in vitro. This can be done at the level of the whole combining site by making new combinations of H and L chains. It can also be done by mutating individual CDRs. Display libraries, commonly expressed in phage or yeast, can be analysed to select for desirable characteristics arising from such changes in antibody sequence.[5][6]

Non-immunoglobulin derived synthetic antibodies

These molecules typically differ in structure to that of an antibody and can be generated either from nucleic acids, as in the case of aptamers, or from non-immunoglobulin protein scaffolds / peptide aptamers, into which hypervariable loops are inserted to form the antigen binding site. Constraining the hypervariable binding loop at both ends within the protein scaffold improves the binding affinity and specificity of the synthetic antibody to levels comparable to or exceeding that of a natural antibody.[7] Common advantages of these molecules compared to use of the typical antibody structure include a smaller size, giving improved tissue penetration, rapid generation times of weeks compared to months for natural and recombinant antibodies and cheaper costs.[3]

Affimer proteins

Affimer proteins are small robust affinity reagents, with a molecular weight of 12-14kDa. They are engineered to bind to their target proteins with high affinity and specificity and as such are a member of the synthetic antibody family.

The Affimer protein scaffold is derived from the cysteine protease inhibitor family of cystatins.[8][9][10][11] Within the protein scaffold there exist two variable peptide loops and a variable N-terminal sequence that provide a high affinity binding surface for the specific target protein. Affimer binders have been produced to a large number of targets including ubiquitin chains, immunoglobulins and C-reactive protein[12] for use in a number of molecular recognition applications. Affimer technology has been commercialised and developed by Avacta Life Sciences, who are developing Affimer binders as reagents for research, diagnostic and therapeutic applications.

Applications

Synthetic antibodies have shown their utility in a number of applications. Their use within the field of research lies predominantly in the life sciences as reagents for protein capture and as protein inhibitors. Within diagnostics they have been utilised in applications ranging from infection[12] and cancer screening[13] to mycotoxin detection in grain samples.[14] Synthetic antibodies are currently the fastest growing class of therapeutics.[15]

See also

References

  1. ↑ Echko, M.M. and Dozier, S.K. (2010). "Recombinant antibody technology for the production of antibodies without the use of animals". AltTox.
  2. ↑ Bradbury, A.R.M., Sidhu, S., Dübel, S. and McCafferty, J. "Beyond natural antibodies: The power of in vitro display technologies". Nat. Biotechnol.date=2011 29 (3): 245–254. doi:10.1038/nbt.1791.
  3. 1 2 Gebauer, M. and Skerra (1995). "Engineered protein scaffolds as next-generation antibody therapeutics". ILAR J 37 (3): 132–141.
  4. ↑ Karu, A.E., Bell, C.W. and Chin, T.E. (2009). "Recombinant Antibody Technology". Curr Opin Chem Biol 13 (3): 245–255.
  5. ↑ Miersch, S. and Sidhu, S.S. (2012). "Synthetic antibodies: Concepts, potential and practical considerations". Methods 57 (4): 486–498. doi:10.1016/j.ymeth.2012.06.012.
  6. ↑ Hammers, C.M. and Stanley, J.R. (2014). "Antibody phage display: Technique and applications". J. Invest Dermatol 134 (2): e17.
  7. ↑ Ladner, R.C. (1995). "Constrained peptides as binding entities". Trends Biotech 13 (10): 426–430. doi:10.1016/s0167-7799(00)88997-0.
  8. ↑ Woodman, R. Yeh, J.T.H., Laurenson, S. and KoFerrigno. (2005). "P. Design and validation of a neutral protein scaffold for the presentation of peptide aptamers". J Mol Biol 352: 1118–1133. doi:10.1016/j.jmb.2005.08.001.
  9. ↑ Hoffmann, T. Stadler, L.K.J., Busby, M., Song, Q., Buxton A.T., Wagner, S.D., Davis, J.J. and Ko Ferrigno, P (2010). "Structure-function studies of and engineered scaffold protein derived from Stefin A. I: Development of the SQM variant". PEDS 23 (5): 403–413. doi:10.1093/protein/gzq012.
  10. ↑ Hoffmann, Toni; Stadler, Lukas Kurt Josef; Busby, Michael; Song, Qifeng; Buxton, Anthony T.; Wagner, Simon D.; Davis, Jason J.; Ferrigno, Paul Ko (2010-05-01). "Structure-function studies of an engineered scaffold protein derived from stefin A. I: Development of the SQM variant". Protein Engineering Design and Selection 23 (5): 403–413. doi:10.1093/protein/gzq012. ISSN 1741-0126. PMC 2851446. PMID 20179045.
  11. ↑ Tiede, Christian; Tang, Anna A. S.; Deacon, Sarah E.; Mandal, Upasana; Nettleship, Joanne E.; Owen, Robin L.; George, Suja E.; Harrison, David J.; Owens, Raymond J. (2014-05-01). "Adhiron: a stable and versatile peptide display scaffold for molecular recognition applications". Protein Engineering Design and Selection 27 (5): 145–155. doi:10.1093/protein/gzu007. ISSN 1741-0126. PMC 4000234. PMID 24668773.
  12. 1 2 Johnson, Anthony; Song, Qifeng; Ferrigno, Paul Ko; Bueno, Paulo R.; Davis, Jason J. (2012-07-26). "Sensitive Affimer and Antibody Based Impedimetric Label-Free Assays for C-Reactive Protein". Analytical Chemistry 84 (15): 6553–6560. doi:10.1021/ac300835b.
  13. ↑ Affibody ltd (2015). "Recombinant antibody technology for the production of antibodies without the use of animals". online.
  14. ↑ NeoVentures Biotechnology Inc (2015). "NeoVentures Biotechnology Inc". online.
  15. ↑ Frenzel, A., Hust, M. and Schirrmann, T. (2013). "Expression of recombinant antibodies". Front. Immunol 4 (217).

External links

This article is issued from Wikipedia - version of the Friday, March 11, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.