Tensairity

Comparison of Tensairity girder (b) and normal steel framework girder (a). When load is applied in top-down direction trying to bend girder force is acting on upper rod of any girder as compression stress, and on lower part as tension. This stress tends to decrease girder width making it less rigid (Girder of zero width has zero flexural strength). In order to prevent this upper and lower rod has to be kept apart. In classical framework girder this is ensured by triangular framework. In tensairity girder gas pressure in air bag is used instead. Lower rod loaded in pure tension can be replaced by rope or the airbag membrane itself. This leads to much better strength-to-weight ratio

Tensairity (registered trademark[1]) is a light weight structural concept that uses low pressure air to stabilize compression elements against buckling. [2] It employs an ancient foundational splinting structure using inflated airbeams and attached stiffeners or cables that gains mechanical advantages for low mass. Pneumatic structures using tensairity are solving problems.[3][2] The structure modality has been particularly developed by Mauro Pedretti.[4][5]

Known applications

Bridge, band stand,[6] aircraft wing construction,[7] temporary shop and hospitality[8]

Related technology

A related structure modality is tensegrity. Conceivably, an ultralightweight structure evacuated of air would float in the atmosphere, much as a buoy floats in water A crushing load is present destabilizing such structures. However, enclosed-air structures perhaps made of tensairity beams in a tensegrity format holding an enveloping skin could be heated by solar energy and interior activity and then become lighter than air, like hot-air balloons. A torus of 72 inch major diameter and 27 inch minor diameter displaces about 5 pounds of atmosphere, so if the torus weighed less than 5 pounds, and was evacuated, it would be buoyant. Buckminster Fuller designed floating cities (air-filled) so lightweight that they would be buoyant only by the effect of solar heat warming the air within to slightly less density than the surrounding air. As domes, they were about 1/2 mile diameter. As floating spheres, the cities would not experience earthquakes.

References

  1. ↑ (PDF) http://web.archive.org/web/20131007023420/http://www.technet-alliance.com/uploads/tx_caeworld/Pressure-Induced-Stability_Bionics2004_Tensairity.pdf. Archived from the original (PDF) on October 7, 2013. Retrieved October 5, 2013. Missing or empty |title= (help)
  2. 1 2 Tensairity
  3. ↑ Airlight uses tensairity Archived January 9, 2008, at the Wayback Machine.
  4. ↑ (PDF) http://web.archive.org/web/20110706234332/http://www.ivbh.ch/yes/2008/poster/villiger.pdf. Archived from the original (PDF) on July 6, 2011. Retrieved September 13, 2010. Missing or empty |title= (help)
  5. ↑ http://web.archive.org/web/20110706231523/http://www.empa.ch/plugin/template/empa/*/82294/---/l=2. Archived from the original on July 6, 2011. Retrieved September 13, 2010. Missing or empty |title= (help)
  6. ↑ Band stand Archived March 1, 2012, at the Wayback Machine.
  7. ↑ An inflatable wing using the principle of Tensairity
  8. ↑ Tensairity solutions for hospitality
This article is issued from Wikipedia - version of the Thursday, March 10, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.