Thermal shift assay

A thermal shift assay quantifies the change in thermal denaturation temperature of a protein under varying conditions. The differing conditions that can be examined are very diverse, e.g. pH, salts, additives, drugs, drug leads, oxidation/reduction, or mutations. The binding of low molecular weight ligands can increase the thermal stability of a protein, as described by Koshland (1958)[1] and Linderstrom-Lang and Schellman (1959).[2] Almost half of enzymes require a metal ion co-factor.[3] Thermostable proteins are often more useful than their non-thermostable counterparts, e.g. DNA polymerase in the polymerase chain reaction,[4] so protein engineering often includes adding mutations to increase thermal stability. Protein crystallisation is more successful for proteins with a higher melting point[5] and adding buffer components that stabilise proteins improve the likelihood of protein crystals forming.[6] If examining pH then the possible effects of the buffer molecule on thermal stability should be taken into account along with the fact that pKa of each buffer molecule changes uniquely with temperature.[7] Additionally, any time a charged species is examined the effects of the counterion should be accounted for.

Thermal stability of proteins has traditionally been investigated using biochemical assays, circular dichroism, or differential scanning calorimetry. Biochemical assays require a catalytic activity of the protein in question as well as a specific assay. Circular dichroism and differential scanning calorimetry both consume large amounts of protein and are low-throughput methods. The thermofluor assay was the first high-throughput thermal shift assay and its utility and limitations has spurred the invention of a plethora of alternate methods. Each method has its strengths and weaknesses but they all struggle with intrinsically disordered proteins without any clearly defined tertiary structure as the essence of a thermal shift assay is measuring the temperature at which a protein goes from well-defined structure to disorder.

Thermofluor

Diagram

The technique was first described by Semisotnov et al. (1991)[8] using 1,8-ANS and quartz cuvettes. Millenium Pharmaceuticals were the first to describe a high-throughput version using a plate reader[9] and Wyeth Research published a variation of the method with SYPRO Orange instead of 1,8-ANS.[10] SYPRO Orange has an excitation/emission wavelength profile compatible with qPCR machines which are almost ubiquitous in institutions that perform molecular biology research. The name Differential Scanning Fluorimetry (DSF) was introduced later[11] but thermofluor is preferable as thermofluor is no longer trademarked and differential scanning fluorimetry is easily confused with differential scanning calorimetry.

SYPRO Orange binds nonspecifically to hydrophobic surfaces, and water strongly quenches its fluorescence. When the protein unfolds, the exposed hydrophobic surfaces bind the dye, resulting in an increase in fluorescence by excluding water. Detergent micelles will also bind the dye and increase background noise dramatically - this effect is lessened by switching to the dye ANS[12] but that requires UV excitation. The stability curve and its midpoint value (melting temperature, Tm also known as the temperature of hydrophobic exposure, Th) are obtained by gradually increasing the temperature to unfold the protein and measuring the fluorescence at each point. Curves are measured for protein only and protein + ligand, and ΔTm is calculated. The method might not work very well for protein-protein interactions if one of the interaction partners contains large hydrophobic patches as it is highly non-trivial to dissect prevention of aggregation, stabilisation of a native folds and steric hindrance of dye access to hydrophobic sites. In addition, partly aggregated protein can also limit the relative fluorescence increase upon heating; in extreme cases there will be no fluorescence increase at all because all protein is already in aggregates before heating. Knowing this effect can be very useful as a high relative fluorescence increase suggests a significant fraction of folded protein in the starting material.

This assay allows high-throughput screening of ligands to the target protein and it is widely used in the early stages of drug discovery in the pharmaceutical industry, structural genomics efforts, and high-throughput protein engineering.[13]

A typical assay

  1. Materials: A fluorometer equipped with temperature control or similar instrumentation (RT-PCR machines); suitable fluorescent dye; a suitable assay plate, such as 96 well RT-PCR plate.
  2. Compound solutions: Test ligands are prepared at a 50- to 100-fold concentrated solution, generally in the 10-100 mM range. For titration, a typical experimental protocol employs a set of 12 well, comprising 11 different concentrations of a test compound with a single negative control well.
  3. Protein solution: Typically, target protein is diluted from a concentrated stock to a working concentration of ~0.5-5 μM protein with dye into a suitable assay buffer. The exact concentrations of protein and dye are defined by experimental assay development studies.
  4. Centrifugation and oil dispense: A brief centrifugation (~1000 × g-force, 1 min) of the assay plate to mix compounds into the protein solution, 1-2 μl silicone oil to prevent the evaporation during heating is overlaid onto the solution (some systems use plastic seals instead), followed by an additional centrifugation step (~1000 × g-force, 1 min).
  5. Instrumental set up: A typical temperature ramp rates range from 0.1-10 °C/min but generally in the range of 1 °C/min. The fluorescence in each well is measured at regular intervals, 0.2-1 °C/image, over a temperature range spanning the typical protein unfolding temperatures of 25-95 °C.[14]

CPM, thiol-specific dyes

Alexandrov et al. (2008)[15] published a variation on the thermofluor assay where SYPRO Orange was replaced by N-[4-(7-diethylamino-4-methyl-3-coumarinyl)phenyl]maleimide (CPM), a compound that only fluoresces after reacting with a nucleophile. CPM has a high preference for thiols over other typical biological nucleophiles and therefore will react with cysteine side chains before others. Cysteines are typically buried in the interior of a folded protein as they are hydrophobic. When a protein denatures cysteine thiols become available and a fluorescent signal can be read from reacted CPM. The exitation and emission wavelengths for reacted CPM are 387 nm/ 463 nm so a fluorescence plate reader or a qPCR machine with specialised filters is required. Alexandrov et al. used the technique successfully on the membrane proteins Apelin GPCR and FAAH as well as β-lactoglobin which fibrillates on heating rather than going to a molten globule.

DCVJ, rigidity sensitive dyes

4-(dicyanovinyl)julolidine (DCVJ) is a molecular rotor probe with fluorescence that is strongly dependent on the rigidity of its environment. When protein denatures DCVJ increases in fluorescence. It has been reported to work with 40 mg/ml of antibody.[16]

Intrinsic tryptophan fluorescence lifetime

The lifetime of tryptophan fluorescence differs between folded and unfolded protein and by measuring the lifetime of UV-excited fluorescence at temperature intervals you can get a measurement of the melting temperature of your protein.

A prominent advantage is that no reporter dyes are required to be added as tryptophan is an intrinsic part of the protein. This can also be a disadvantage as not all proteins contain tryptophan. Intrinsic fluorescence lifetime works with membrane proteins and detergent micelles but a powerful UV fluorescer in the buffer could drown out the signal and few articles are published using the technique for thermal shift assays.

Intrinsic tryptophan fluorescence wavelength

The excitation and emission wavelengths of tryptophan are dependent on the immediate environment and therefore differs between folded and unfolded protein, just as the fluorescence lifetime. Currently there are at least two machines on the market that can read this shift in wavelength in a high-throughput manner while heating the samples.

The advantages and disadvantages are the same as for fluorescence lifetime except that there are more examples in the scientific literature of use.

Static light scattering

Static light scattering allows monitoring of the sizes of the species in solution. Since proteins typically aggregate upon denaturation (or form fibrils) the detected species size will go up.

This is label-free and independent of specific residues in the protein or buffer composition. The only requirement is that the protein actually aggregates/fibrillates after denaturation and that the protein of interest has been purified.

FastPP

In fast parallel proteolysis the researcher adds a thermostable protease (thermolysin) and takes out samples in parallel upon heating in a thermal gradient cycler.[17] Optionally, for instance for lowly expressed proteins, a Western blot is then run to determine at what temperature a protein becomes degraded. For pure or highly enriched proteins, direct SDS-PAGE detection is possible facilitating Commassie-fluorescence based direct quantification. FastPP exploits that proteins become increasingly susceptible to proteolysis when unfolded and that thermolysin cleaves at hydrophobic residues which are typically found in the core of proteins.

To reduce the workload, Western Blots could be replaced by SDS-PAGE gel polyhistidine-tag staining, provided that the protein has such a tag and is expressed in adequate amounts.

FastPP can be used on unpurified, complex mixtures of proteins and proteins fused with other proteins, such as GST or GFP, as long as the sequence that is the target of the Western blot, e.g. His-tag, is directly linked to the protein of interest. However, commercially available thermolysin is dependent on calcium ions for activity and denatures itself just above 85 degrees Celsius. So calcium must be present and calcium chelators absent in the buffer - other compounds that interfere with the function (such as high concentrations of detegents) of the protease could also be problematic.

FASTpp has also been used to monitor binding-coupled folding of intrinsically disordered proteins (IDPs).

CETSA

CETSA stands for cellular thermal shift assay.[18] Very similar to fastPP but instead of adding a protease samples are centrifuged after heating and the supernatant is run on Western blots or two target-directed antibodies are added and their relative proximity is detected through FRET. When a protein denatures it aggregates and becomes part of the pellet and can therefore not be found in the supernatant. An intrinsic limitation of this assay is that not all proteins aggregate upon unfolding but might instead populate highly soluble, relatively compact molten-globule (like) conformations. In addition, it is possible that proteins will co-precipitate with their less stable protein interaction partners and therefore show lower apparent stability than their actual thermodynamic stability.

Just as for FastPP the Western blot could be replaced by staining for a polyhistidine-tag in the SDS-PAGE gel. Additionally, instead of using two antibodies the FRET method could be performed with a single fluorescent antibody and a fluorescently labelled peptide recognised by the antibody.[19]

A technique that has been shown to work on both complex mixtures and whole cells but unfortunately requires antibodies. The protein of interest should not be fused to other proteins such as MBP or GFP as they could keep a denatured protein in solution.

ThermoFAD

Thermofluor variant specific for flavin-binding proteins. Analogous to thermofluor binding assays, a small volume of protein solution is heated up and the fluorescence increase is followed as function of temperature. In contrast to Thermofluor, no external fluorescent dye is needed because the flavin cofactor is already present in the flavin-binding protein and its fluorescence properties change upon unfolding. [20]

SEC-TS

Size exclusion chromatography can be used directly to access protein stability in the presence or absence of ligands.[21] Samples of purified protein are heated in a water bath or thermocycler, cooled, centrifuged to remove aggregated proteins, and run on an analytical HPLC. As the melting temperature is reached and protein precipitates or aggregates, peak height decreases and void peak height increases. This can be used to identify ligands and inhibitors, and optimize purification conditions.[22][23]

While of lower through-put than FSEC-TS, requiring large amounts of purified protein, SEC-TS avoids any influence of the fluorescent tag on apparent protein stability.

FSEC-TS

In fluorescence-detection size exclusion chromatography the protein of interest is fluorescently tagged, e.g. with GFP, and run through a gel filtration column on an FPLC system equipped with a fluorescence detector. The resulting chromatogram allows allows the researcher to estimate the monodispersity and expression level of the tagged protein in the current buffer.[24] Since only fluorescence is measured, only the tagged protein is seen in the chromatogram. FSEC is typically used to compare membrane protein orthologs or screen detergents to solubilise specific membrane proteins in.

For fluorescence-detection size-exclusion chromatography-based thermostability assay (FSEC-TS) the samples are heated in the same manner as in FastPP and CETSA and after centrifugation to clear away precipitate the supernatant is treated in the same manner as FSEC.[25] Larger aggregates are seen in the void volume while the peak height for the protein of interest decreases when the unfolding temperature is reached.

GFP has a Tm of ~76 C so the technique is limited to temperature below ~70 C. Of all the techniques mentioned it may have the lowest throughput but it is free of antibody requirements and works on complex mixtures of proteins.

Radioligand binding thermostability assay

GPCRs are pharmacologically important transmembrane proteins. Their x-ray crystal structures were revealed long after other transmembrane proteins of lesser interest. The difficulty in obtaining protein crystals of GPCRs was likely due to their high flexibility. Less flexible versions were obtained by truncating, mutating, and inserting T4 lysozyme in the recombinant sequence. One of the methods researchers used to guide these alterations was radioligand binding thermostability assay.[26]

The assay is performed by incubating the protein with a radiolabelled ligand of the protein for 30 minutes at a given temperature, then quench on ice, run through a gel filtration mini column, and quantify the radiation levels of the protein that comes off the column. The radioligand concentration is high enough to saturate the protein. Denatured protein is unable to bind the radioligand and the protein and radioligand will be separated in the gel filtration mini column. When screening mutants selection will be for thermal stability in the specific conformation, i.e. if the radioligand is an agonist selection will be for the agonist binding conformation and if it is an antagonist then the screening is for stability in the antagonist binding conformation.

Radioassays have the advantage of working with minute amounts of protein. But it is work with radioactive substances and large amount of manual labour is involved. A high-affinity ligand has to be known for the protein of interest and the buffer must not interfere with the binding of the radioligand. Other thermal shift assays can also select for specific conformations if a ligand of the appropriate type is added to the experiment.

Comparisons of the various approaches

Thermofluor CPM DCVJ Tryptophan fluorescence lifetime Tryptophan fluorescence wavelength Static light scattering FastPP CETSA SEC-TS FSEC-TS Radioligand binding thermostability assay
Purification Pure protein Pure protein Pure protein at very high concentration Pure protein Pure protein Pure protein Complex mixture Complex mixture Pure protein Complex mixture Complex mixture
Detergents Below cmc Yes Yes Yes Yes Yes Yes (low conc.) Yes Yes Yes Yes
Buffer Avoid very high conc. organic solvents Avoid thiols, possibly other nucleophiles - - - - Thermolysin requires calcium ions - - - Should maximize radioligand binding affinity
Throughput Highest Highest Highest Intermediate Intermediate Intermediate Intermediate-low (if western required) Lowest (intermediate with FRET) Lowest Lowest Lowest
Sequence requirements No Cysteines, not on surface and not in disulphide bonds No Tryptophan Tryptophan No Sequence must contain hydrophobic residues (required for cleavage) For antibody No For fluorescent tag No
Equipment requirements qPCR machine qPCR machine with UV excitation or fluorescence plate reader qPCR machine High-throughput differential intrinsic fluorescence lifetime reader High-throughput differential intrinsic fluorescence wavelength reader High-throughput differential static light scattering reader Thermal cycler (or water bath) and Western blot Thermal cycler (or water bath) and Western blot (or FRET reader) Thermal cycler (or water bath) and HPLC Thermal cycler (or water bath) and FPLC with fluorescence reader Thermal cycler (or water bath) and scintillation counter
Labels Yes + DMSO Yes + DMSO Yes + DMSO Label-free Label-free Label-free Label-free Label-free Label-free Yes Radioligand
Possible interference from fluorophores in buffer Yes Yes Yes Yes Yes No No No No Yes No
Fusion proteins No Possibly No Possibly Possibly No Optional No No Yes Yes
Works with proteins that fibrillate when heated No Yes, at least with beta-lactoglobulin Yes Yes, probably Yes, probably Yes Yes (if cleavage faster than fibrillisation at high TL conc.) Yes Yes Yes Yes

References

  1. ↑ Koshland, DE (February 1958). "Application of a Theory of Enzyme Specificity to Protein Synthesis.". Proceedings of the National Academy of Sciences of the United States of America 44 (2): 98–104. doi:10.1073/pnas.44.2.98. PMC 335371. PMID 16590179.
  2. ↑ Linderstrøm-Lang, K.; Schellman, J. A. (1959). "Protein structure and enzyme activity". The Enzymes 1 (2): 443–510.
  3. ↑ Waldron, KJ; Rutherford, JC; Ford, D; Robinson, NJ (13 August 2009). "Metalloproteins and metal sensing.". Nature 460 (7257): 823–30. doi:10.1038/nature08300. PMID 19675642.
  4. ↑ Saiki, RK; Gelfand, DH; Stoffel, S; Scharf, SJ; Higuchi, R; Horn, GT; Mullis, KB; Erlich, HA (29 January 1988). "Primer-directed enzymatic amplification of DNA with a thermostable DNA polymerase.". Science 239 (4839): 487–91. doi:10.1126/science.2448875. PMID 2448875.
  5. ↑ Dupeux, F; Röwer, M; Seroul, G; Blot, D; Márquez, JA (November 2011). "A thermal stability assay can help to estimate the crystallization likelihood of biological samples.". Acta crystallographica. Section D, Biological crystallography 67 (Pt 11): 915–9. doi:10.1107/s0907444911036225. PMID 22101817.
  6. ↑ Ericsson, UB; Hallberg, BM; Detitta, GT; Dekker, N; Nordlund, P (15 October 2006). "Thermofluor-based high-throughput stability optimization of proteins for structural studies.". Analytical Biochemistry 357 (2): 289–98. doi:10.1016/j.ab.2006.07.027. PMID 16962548.
  7. ↑ Grøftehauge, MK; Hajizadeh, NR; Swann, MJ; Pohl, E (1 January 2015). "Protein-ligand interactions investigated by thermal shift assays (TSA) and dual polarization interferometry (DPI).". Acta crystallographica. Section D, Biological crystallography 71 (Pt 1): 36–44. doi:10.1107/s1399004714016617. PMID 25615858.
  8. ↑ Semisotnov, GV; Rodionova, NA; Razgulyaev, OI; Uversky, VN; Gripas', AF; Gilmanshin, RI (January 1991). "Study of the "molten globule" intermediate state in protein folding by a hydrophobic fluorescent probe.". Biopolymers 31 (1): 119–28. doi:10.1002/bip.360310111. PMID 2025683.
  9. ↑ Pantoliano, MW; Petrella, EC; Kwasnoski, JD; Lobanov, VS; Myslik, J; Graf, E; Carver, T; Asel, E; Springer, BA; Lane, P; Salemme, FR (December 2001). "High-density miniaturized thermal shift assays as a general strategy for drug discovery.". Journal of biomolecular screening 6 (6): 429–40. doi:10.1177/108705710100600609. PMID 11788061.
  10. ↑ Lo, MC; Aulabaugh, A; Jin, G; Cowling, R; Bard, J; Malamas, M; Ellestad, G (1 September 2004). "Evaluation of fluorescence-based thermal shift assays for hit identification in drug discovery.". Analytical Biochemistry 332 (1): 153–9. doi:10.1016/j.ab.2004.04.031. PMID 15301960.
  11. ↑ Niesen, FH; Berglund, H; Vedadi, M (2007). "The use of differential scanning fluorimetry to detect ligand interactions that promote protein stability.". Nature protocols 2 (9): 2212–21. doi:10.1038/nprot.2007.321. PMID 17853878.
  12. ↑ Kohlstaedt, M; von der Hocht, I; Hilbers, F; Thielmann, Y; Michel, H (May 2015). "Development of a Thermofluor assay for stability determination of membrane proteins using the Na(+)/H(+) antiporter NhaA and cytochrome c oxidase.". Acta crystallographica. Section D, Biological crystallography 71 (Pt 5): 1112–22. doi:10.1107/s1399004715004058. PMID 25945577.
  13. ↑ Ciulli, A; Abell, C (December 2007). "Fragment-based approaches to enzyme inhibition.". Current opinion in biotechnology 18 (6): 489–96. doi:10.1016/j.copbio.2007.09.003. PMID 17959370.
  14. ↑ Kranz, JK; Schalk-Hihi, C (2011). "Protein thermal shifts to identify low molecular weight fragments.". Methods in enzymology 493: 277–98. doi:10.1016/B978-0-12-381274-2.00011-X. PMID 21371595.
  15. ↑ Alexandrov, AI; Mileni, M; Chien, EY; Hanson, MA; Stevens, RC (March 2008). "Microscale fluorescent thermal stability assay for membrane proteins.". Structure (London, England : 1993) 16 (3): 351–9. doi:10.1016/j.str.2008.02.004. PMID 18334210.
  16. ↑ Menzen, T; Friess, W (February 2013). "High-throughput melting-temperature analysis of a monoclonal antibody by differential scanning fluorimetry in the presence of surfactants.". Journal of pharmaceutical sciences 102 (2): 415–28. doi:10.1002/jps.23405. PMID 23212746.
  17. ↑ Minde, DP; Maurice, MM; Rüdiger, SG (2012). "Determining biophysical protein stability in lysates by a fast proteolysis assay, FASTpp.". PLOS ONE 7 (10): e46147. doi:10.1371/journal.pone.0046147. PMC 3463568. PMID 23056252.
  18. ↑ Jafari, R; Almqvist, H; Axelsson, H; Ignatushchenko, M; Lundbäck, T; Nordlund, P; Martinez Molina, D (September 2014). "The cellular thermal shift assay for evaluating drug target interactions in cells.". Nature protocols 9 (9): 2100–22. doi:10.1038/nprot.2014.138. PMID 25101824.
  19. ↑ Kreisig, T; Prasse, AA; Zscharnack, K; Volke, D; Zuchner, T (8 July 2014). "His-tag protein monitoring by a fast mix-and-measure immunoassay.". Scientific Reports 4: 5613. doi:10.1038/srep05613. PMID 25000910.
  20. ↑ "ThermoFAD, a Thermofluor-adapted flavin ad hoc detection system for protein folding and ligand binding". FEBS J 276: 2833–40. 2009. doi:10.1111/j.1742-4658.2009.07006.x. PMID 19459938.
  21. ↑ Mancusso, R; Karpowich, NK; Czyzewski, BK; Wang, DN (December 2011). "Simple screening method for improving membrane protein thermostability.". Methods (San Diego, Calif.) 55 (4): 324–9. doi:10.1016/j.ymeth.2011.07.008. PMC 3220791. PMID 21840396.
  22. ↑ Czyzewski, BK; Wang, DN (11 March 2012). "Identification and characterization of a bacterial hydrosulphide ion channel.". Nature 483 (7390): 494–7. doi:10.1038/nature10881. PMID 22407320.
  23. ↑ Mancusso, R; Gregorio, GG; Liu, Q; Wang, DN (22 November 2012). "Structure and mechanism of a bacterial sodium-dependent dicarboxylate transporter.". Nature 491 (7425): 622–6. doi:10.1038/nature11542. PMID 23086149.
  24. ↑ Kawate, T; Gouaux, E (April 2006). "Fluorescence-detection size-exclusion chromatography for precrystallization screening of integral membrane proteins.". Structure (London, England : 1993) 14 (4): 673–81. doi:10.1016/j.str.2006.01.013. PMID 16615909.
  25. ↑ Hattori, M; Hibbs, RE; Gouaux, E (8 August 2012). "A fluorescence-detection size-exclusion chromatography-based thermostability assay for membrane protein precrystallization screening.". Structure (London, England : 1993) 20 (8): 1293–9. doi:10.1016/j.str.2012.06.009. PMID 22884106.
  26. ↑ Lebon, G; Bennett, K; Jazayeri, A; Tate, CG (10 June 2011). "Thermostabilisation of an agonist-bound conformation of the human adenosine A(2A) receptor.". Journal of Molecular Biology 409 (3): 298–310. doi:10.1016/j.jmb.2011.03.075. PMID 21501622.
This article is issued from Wikipedia - version of the Wednesday, February 10, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.