Fisher information metric
In information geometry, the Fisher information metric is a particular Riemannian metric which can be defined on a smooth statistical manifold, i.e., a smooth manifold whose points are probability measures defined on a common probability space. It can be used to calculate the informational difference between measurements.
The metric is interesting in several respects. First, it can be understood to be the infinitesimal form of the relative entropy (i.e., the Kullback–Leibler divergence); specifically, it is the Hessian of the divergence. Alternately, it can be understood as the metric induced by the flat space Euclidean metric, after appropriate changes of variable. When extended to complex projective Hilbert space, it becomes the Fubini–Study metric; when written in terms of mixed states, it is the quantum Bures metric.
Considered purely as a matrix, it is known as the Fisher information matrix. Considered as a measurement technique, where it is used to estimate hidden parameters in terms of observed random variables, it is known as the observed information.
Definition
Given a statistical manifold with coordinates , one writes for the probability distribution as a function of . Here is drawn from the value space R for a (discrete or continuous) random variable X. The probability is normalized by
The Fisher information metric then takes the form:
The integral is performed over all values x in R. The variable is now a coordinate on a Riemann manifold. The labels j and k index the local coordinate axes on the manifold.
When the probability is derived from the Gibbs measure, as it would be for any Markovian process, then can also be understood to be a Lagrange multiplier; Lagrange multipliers are used to enforce constraints, such as holding the expectation value of some quantity constant. If there are n constraints holding n different expectation values constant, then the dimension of the manifold is n dimensions smaller than the original space. In this case, the metric can be explicitly derived from the partition function; a derivation and discussion is presented there.
Substituting from information theory, an equivalent form of the above definition is:
To show that the equivalent form equals the above definition note that
and apply on both sides.
Relation to the Kullback–Leibler divergence
Alternately, the metric can be obtained as the second derivative of the relative entropy or Kullback–Leibler divergence. To obtain this, one considers two probability distributions and , which are infinitesimally close to one another, so that
with an infinitesimally small change of in the j direction, and the rate of change of the probability distribution. Then, since the Kullback–Leibler divergence has an absolute minimum 0 for P = Q one has an expansion up to second order in of the form
- .
The symmetric matrix is positive (semi) definite and is the Hessian matrix of the function at the stationary point . This can be thought of intuitively as: "The distance between two infinitesimally close points on a statistical differential manifold is the amount of information, i.e. the informational difference between them."
Relation to Ruppeiner geometry
The Ruppeiner metric and Weinhold metric arise as the thermodynamic limit of the Fisher information metric.[1]
Change in entropy
The action of a curve on a Riemannian manifold is given by The path parameter here is time t; this action can be understood to give the change in entropy of a system as it is moved from time a to time b.[1] Specifically, one has
as the change in entropy. This observation has resulted in practical applications in chemical and processing industry: in order to minimize the change in entropy of a system, one should follow the minimum geodesic path between the desired endpoints of the process. The geodesic minimizes the entropy, due to the Cauchy–Schwarz inequality, which states that the action is bounded below by the length of the curve, squared.
Relation to the Jensen–Shannon divergence
The Fisher metric also allows the action and the curve length to be related to the Jensen–Shannon divergence.[1] Specifically, one has
where the integrand dJSD is understood to be the infinitesimal change in the Jensen–Shannon divergence along the path taken. Similarly, for the curve length, one has
That is, the square root of the Jensen–Shannon divergence is just the Fisher metric (divided by the square root of 8).
As Euclidean metric
For a discrete probability space, that is, a probability space on a finite set of objects, the Fisher metric can be understood to simply be the Euclidean metric restricted to a positive "quadrant" of a unit sphere, after appropriate changes of variable.[2]
An N-dimensional unit sphere embedded in (N + 1)-dimensional space is defined as
The metric on the surface of the sphere is given by
where the are 1-forms; they are the basis vectors for the cotangent space. Writing as the basis vectors for the tangent space, so that
- ,
the Euclidean metric may be written as
The superscript 'flat' is there to remind that, when written in coordinate form, this metric is with respect to the flat-space coordinate . Consider now the change of variable . The sphere condition now becomes the probability normalization condition
while the metric becomes
The last can be recognized as one-fourth of the Fisher information metric. To complete the process, recall that the probabilities are parametric functions of the manifold variables , that is, one has . Thus, the above induces a metric on the parameter manifold:
or, in coordinate form, the Fisher information metric is:
where, as before,
The superscript 'fisher' is present to remind that this expression is applicable for the coordinates ; whereas the non-coordinate form is the same as the Euclidean (flat-space) metric. That is, the Fisher information metric on a statistical manifold is simply (four times) the Euclidean metric restricted to the positive quadrant of the sphere, after appropriate changes of variable.
When the random variable is not discrete, but continuous, the argument still holds. This can be seen in one of two different ways. One way is to carefully recast all of the above steps in an infinite-dimensional space, being careful to define limits appropriately, etc., in order to make sure that all manipulations are well-defined, convergent, etc. The other way, as noted by Gromov,[2] is to use a category-theoretic approach; that is, to note that the above manipulations remain valid in the category of probabilities.
As Fubini–Study metric
The above manipulations deriving the Fisher metric from the Euclidean metric can be extended to complex projective Hilbert spaces. In this case, one obtains the Fubini–Study metric.[3] This should perhaps be no surprise, as the Fubini–Study metric provides the means of measuring information in quantum mechanics. The Bures metric, also known as the Helstrom metric, is identical to the Fubini–Study metric,[3] although the latter is usually written in terms of pure states, as below, whereas the Bures metric is written for mixed states. By setting the phase of the complex coordinate to zero, one obtains exactly one-fourth of the Fisher information metric, exactly as above.
One begins with the same trick, of constructing a probability amplitude, written in polar coordinates, so:
Here, is a complex-valued probability amplitude; and are strictly real. The previous calculations are obtained by setting . The usual condition that probabilities lie within a simplex, namely that
is equivalently expressed by the idea the square amplitude be normalized:
When is real, this is the surface of a sphere.
The Fubini–Study metric, written in infinitesimal form, using quantum-mechanical bra–ket notation, is
In this notation, one has that and integration over the entire measure space X is written as
The expression can be understood to be an infinitesimal variation; equivalently, it can be understood to be a 1-form in the cotangent space. Using the infinitesimal notation, the polar form of the probability above is simply
Inserting the above into the Fubini–Study metric gives:
Setting in the above makes it clear that the first term is (one-fourth of) the Fisher information metric. The full form of the above can be made slightly clearer by changing notation to that of standard Riemannian geometry, so that the metric becomes a symmetric 2-form acting on the tangent space. The change of notation is done simply replacing and and noting that the integrals are just expectation values; so:
The imaginary term is a symplectic form, it is the Berry phase or geometric phase. In index notation, the metric is:
Again, the first term can be clearly seen to be (one fourth of) the Fisher information metric, by setting . Equivalently, the Fubini–Study metric can be understood as the metric on complex projective Hilbert space that is induced by the complex extension of the flat Euclidean metric. The difference between this, and the Bures metric, is that the Bures metric is written in terms of mixed states.
Formal definition
A slightly more formal, abstract definition can be given, as follows.[4]
Let X be an orientable manifold, and let be a measure on X. Equivalently, let be a probability space on , with sigma algebra and probability .
The statistical manifold S(X) of X is defined as the space of all measures on X (with the sigma-algebra held fixed). Note that this space is infinite-dimensional, and is commonly taken to be a Fréchet space. The points of S(X) are measures.
Pick a point and consider the tangent space . The Fisher information metric is then an inner product on the tangent space. With some abuse of notation, one may write this as
Here, and are vectors in the tangent space; that is, . The abuse of notation is to write the tangent vectors as if they are derivatives, and to insert the extraneous d in writing the integral: the integration is meant to be carried out using the measure over the whole space X.
This definition of the metric can be seen to be equivalent to the previous, in several steps. First, one selects a submanifold of S(X) by considering only those measures that are parameterized by some smoothly varying parameter . Then, if is finite-dimensional, then so is the submanifold; likewise, the tangent space has the same dimension as .
With some additional abuse of language, one notes that the exponential map provides a map from vectors in a tangent space to points in an underlying manifold. Thus, if is a vector in the tangent space, then is the corresponding probability associated with point (after the parallel transport of the exponential map to .) Conversely, given a point , the logarithm gives a point in the tangent space (roughly speaking, as again, one must transport from the origin to point ; for details, refer to original sources). Thus, one has the appearance of logarithms in the simpler definition, previously given.
See also
References
- 1 2 3 Gavin E. Crooks, "Measuring thermodynamic length" (2007), ArXiv 0706.0559 Physical Review Letters (2009) pp100602. DOI: 10.1103/PhysRevLett.99.100602
- 1 2 Misha Gromov, (2012) "In a Search for a Structure, Part 1: On Entropy."
- 1 2 Paolo Facchi, Ravi Kulkarni, V. I. Man'ko, Giuseppe Marmo, E. C. G. Sudarshan, Franco Ventriglia "Classical and Quantum Fisher Information in the Geometrical Formulation of Quantum Mechanics" (2010), Physics Letters A 374 pp. 4801. DOI: 10.1016/j.physleta.2010.10.005
- ↑ Mitsuhiro Itoh and Yuichi Shishido, "Fisher information metric and Poisson kernels" (2008)
- Edward H. Feng, Gavin E. Crooks, "Far-from-equilibrium measurements of thermodynamic length" (2009) Physical Review E 79, pp 012104. DOI: 10.1103/PhysRevE.79.012104
- Shun'ichi Amari (1985) Differential-geometrical methods in statistics, Lecture notes in statistics, Springer-Verlag, Berlin.
- Shun'ichi Amari, Hiroshi Nagaoka (2000) Methods of information geometry, Translations of mathematical monographs; v. 191, American Mathematical Society.
- Paolo Gibilisco, Eva Riccomagno, Maria Piera Rogantin and Henry P. Wynn, (2009) Algebraic and Geometric Methods in Statistics, Cambridge U. Press, Cambridge.