Tianyi UAV

Tianyi UAVs are Chinese UAVs developed by Nanjing Tianyi (meaning Sky One) Unmanned Aerial Vehicles Co., Ltd. (Tianyi, 南京天一无人飞行器有限公司) Some of its UAVs are jointly developed with Nanjing University of Science and Technology.

Flying Fox 1

Flying Fox 1 (Fei-Hu Yi-Hao or Feihu Yihao, 飞狐一号) UAV is an experimental UAV developed by Tianyi to gain experience in carrier landing. Flying Fox 1 UAV is a fixed-wing UAV with a twin-boom layout, inverted v-tail, and tricycle landing gear. Propulsion is provided by a twin-blade pusher propeller driven by a gasoline engine mounted in the rear end of the fuselage. The Flying Fox 1 gained attention when it won the 500000 ¥ prize during the AVIC Cup International UAV Innovation Grand Price Competition (Zhong-Hai Gong-Ye Bei Guo-Ji Wu-Ren Fei-Xing-Qi Chuang-Xin Da-Jiang-Sai中航工业杯国际无人飞行器创新大奖赛) held in Beijing in February 2011. Specification:[1][2]

Training UAV Flying Sky

Training UAV Flying Sky (Fei-Tian or Feitian, 飞天) is an UAV in in conventional layout with high-wing configuration and tricycle landing gear. The nose wheel has fairing to reduce drag. Propuslion is provided by a two-blade propeller driven by a tractor engine mounted in the nose.[3] Training UAV Flying Sky is intended to be used as a lower cost training UAV for future UAV crew operating more expensive UAVs such as TY-HC series. Externally, this Training UAV Flying Sky visually resembles a miniature version of Cessna 152.[4] Training UAV Flying Sky has also been used in the development of Flying Fox 1 experimental aircraft designed to gain experience in carrier landing.[5]

TY-DB3

TY-DB3 is an UAV in conventional layout with high wing configuration and tricycle landing gear system. Propulsion is provided by a three-blade propeller driven by a tractor engine mounted in the nose, powered by a Komatsu Limited 80 cc gasoline engine.[6] Specification:[7]

TY-HC30

TY-HC30 is a fixed-wing UAV in twin-boom layout with tricycle landing gear. Propulsion is provided by a two-blade propeller driven by a pusher gasoline engine mounted in the rear end of the fuselage.[8][9]

TY-HC40 Sky Eye

TY-HC40 is a fixed-wing UAV in twin-boom layout with inverted v-tail. Propulsion is provided by a two-blade propeller driven by a pusher gasoline engine mounted in the rear end of the fuselage, and it has a tricycle landing gear system.[10] Specification:[11]

TY-HC75

TY-HC-75 UAV is a fixed-wing UAV in twin-boom layout with winglets and tricycle landing gear. Propulsion is provided by a three-blade propeller driven by a pusher engine mounted in the rear end of the fuselage, powered by a Limbach Flugmotoren 275 twin cylinder gasoline engine.[12] Specification:[13]

TY-Z10

TY-Z10 UAV is a fixed-wing UAV in twin-boom layout with inverted v-tail. Landing gear system consists of a pair of skids and propulsion is provided by a two-blade propeller driven by a pusher engine mounted in the rear end of the fuselage, powered by DL55 engine.[14] Specification:[15]

See also

References

This article is issued from Wikipedia - version of the Tuesday, October 28, 2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.