Ting Kau Bridge

Ting Kau Bridge
汀九橋
Coordinates Coordinates: 22°21′51″N 114°4′48″E / 22.36417°N 114.08000°E / 22.36417; 114.08000
Carries 6 lanes of roadway
Crosses Rambler Channel
Locale Tsing Yi Island and Ting Kau
Characteristics
Design Cable-stayed bridge
Total length 1,177 metres (3,862 ft)
Longest span 448 metres (1,470 ft) and 475 metres (1,558 ft)
History
Opened 1998
Ting Kau Bridge
Traditional Chinese 汀九橋
Simplified Chinese 汀九桥

Ting Kau Bridge is a 1,177-metre (3,862 ft) long cable-stayed bridge in Hong Kong that spans from the northwest of Tsing Yi Island and Tuen Mun Road. It is near the Tsing Ma Bridge which also serves as a major connector between the Hong Kong International Airport on Lantau Island and the rest of Hong Kong. It was completed in 1998. The bridge is toll-free.

The bridge is part of Route 3, connecting Northwest New Territories with Hong Kong Island. Other major structures on the road include the Tai Lam Tunnel, the Cheung Tsing Tunnel, the Cheung Tsing Bridge and the Western Harbour Crossing. The Ting Kau Bridge carries the heaviest traffic volume of the bridges on the Lantau Link, with many container trucks travelling between mainland China and the HK container port. A chromatic study and specially designed architectural lighting are intended to set the bridge off in its surroundings.

Design

Ting Kau Contractors Joint Venture designed and built Ting Kau Bridge between 1994 and 1998. The joint venture consisted of lead partners Cubiertas Y Mzov (22%) and Entrecanales Y Tavora (22%), both of Spain (now both part of Acciona, S.A); Germany's Ed. Züblin (22%); Australia's Downer and Co (22%); and Hong Kong's Paul Y (12%). Constructing engineers were Schlaich Bergermann & Partner.[1]

The design and construction cost of the bridge was HK$1.94 billion. It is one of the longest cable-stayed bridges in the world. Along with the Tsing Ma and Kap Shui Mun bridges, it is closely monitored by the Wind and Structural Health Monitoring System (WASHMS).

Ting Kau Bridge is the world's first major 4-span cable-stayed bridge. This meant that the central tower had to be stabilised longitudinally, which was accomplished using the longest cable stays ever used in a bridge (465 m (1,526 ft)). The design of this bridge contains special features such as single leg towers, which are stabilised by transverse cables like the masts of a sailboat. The Ting Kau Bridge and approach viaducts link the western New Territories and the mainland to the Lantau Fixed Crossing expressway, which connects the airport to Kowloon and Hong Kong. It meets the Lantau Fixed Crossing on Tsing Yi Island, 500 metres (1,600 ft) from the Tsing Ma Bridge.

The Ting Kau Bridge and Approach Viaduct are 1,875 metres (6,152 ft) long while the triple tower bridge has an overall length of 1,177 metres (3,862 ft). The three towers were specially designed to withstand extreme wind and typhoon conditions, and have heights of 170 metres (560 ft), 194 metres (636 ft), and 158 metres (518 ft), located on the Ting Kau headland, on a reclaimed island in Rambler Channel (which is 900 metres (3,000 ft) wide), and on the north-west Tsing Yi shoreline, respectively. The arrangement of separate decks on both sides of the 3 towers contributes to the slender appearance of the bridge while helping it act favourably under heavy wind and typhoon loads. Each deck carries 3 traffic lanes and a hard shoulder.

Measurements

References

  1. ↑ Structurae database

See also

Wikimedia Commons has media related to Ting Kau Bridge.
Preceded by
Cheung Tsing Highway		 Hong Kong Route 3

Ting Kau Bridge 		Succeeded by
Tai Lam Tunnel
This article is issued from Wikipedia - version of the Wednesday, November 18, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.