Toton TMD

Toton TMD

Diesel locomotives on shed, during the BR era.
Overview
Location Toton, Nottinghamshire, United Kingdom
Coordinates 52°54′51″N 1°16′50″W / 52.9141°N 1.2806°W / 52.9141; -1.2806Coordinates: 52°54′51″N 1°16′50″W / 52.9141°N 1.2806°W / 52.9141; -1.2806
Owner DB Schenker
Depot Code 18A
TO
Type Diesel
Details
Original Midland Railway
Pre-grouping LMS
Post-grouping British Railways

Toton Traction Maintenance Depot or Toton Sidings is one of the largest rail depots in the United Kingdom. Toton TMD is bordered by Long Eaton and Sandiacre in Derbyshire and Toton in Nottinghamshire. The official depot code for Toton TMD is TO, previously shed code 18A. The disused section of Toton sidings is the proposed site for the East Midlands Hub station, on the Leeds branch of High Speed 2, Phase Two.[1]

History

A classic mid-1980s shot of Toton, showing the Teesside Steelworks/Lackenby sidings – Corby Steelworks train on the up main line headed by a British Rail Class 37, whilst a British Rail Class 56 leaves the North Yard with coal empties on the second down goods line

The history of the development of Toton is highly associated with the history, development and decline of the coal industry in England. The Midland Railway had developed the Midland Main Line from the 1860s, and had a developing revenue from coal traffic from both the Yorkshire and Nottinghamshire coalfields to the power stations of the industrialised West Midlands. This traffic was added to by the fact that most towns also had their own gasworks, with coal delivered by rail to their own private sidings, and the rapidly developing domestic use of coal for heating and cooking.

With need to marshall coal traffic, a location close to the strategically located Trent Junction became obvious, and hence the development of Toton as a railway yard from the late 19th century. The yards eventually spanned: the Old/New Banks; North Yard; West Yard; Sandiacre Ballast Sidings. Coal traffic reached its peak through the yards post World War II in the 1950s, with over 1million wagons per year passing through what was then the largest marshalling yard in Europe, and the third largest in the world. Local traffic included coal and iron ore and steel from the nearby Stanton Ironworks. With the coming of the Beeching Axe, British Railways shelved all proposed development of any other marshalling yards, thereby increasing traffic through the yards further. This was the peak of Toton traffic. However, by the 1970s the yard was in decline. With the introduction of Merry-go-round trains direct from colliery to power station, and the decline in the use of domestic coal in favour of North Sea gas, rail traffic through the yards was diminishing quickly. The Down Side ceased hump shunting in 1978, followed by the Up Side in 1984. Many of the yards were lifted during the 1970s and 1980s, and in the late 1980s the yards were rationalised to the basic shape seen today. This was the era when Toton TMD was the home of Class 20, Class 56 and Class 58.

Present

Toton TMD

Toton TMD, showing British Rail Class 60 and British Rail Class 66 on shed

Since privatisation of the UK rail network, Toton TMD has been operated by EWS, now rebranded as DB Schenker Rail (UK).

Nowadays, and mainly due to the rationalisation of rail freight by EWS the TMD is home to the Class 60 and Class 66 diesel locomotives. The older traction has been taken out of service by EWS/DBS and nearly 75% of the Class 60 fleet is in storage, many at Toton.

Changes in the maintenance of locomotives have also meant that Toton is now the only TMD within DBS where heavy maintenance is carried out on locomotives. More recently a number of locos at Toton have been modified for use in France with EWS/DBS subsidiary Euro Cargo Rail.

The traincrew depot has also declined as a result of the loss of traffic and now has a depot complement of 48 drivers (in 2010), which contrasts with the depot's complement on privatisation when around 170 drivers were based here.

Toton Marshalling Yards

Toton "Down" sidings
Toton "Up" sidings and the site of the marshalling yard. The proposed site of the High Speed 2 East Midlands Hub railway station.

The changes in traffic flows have meant changes in the way freight is handled by the yards at Toton, primarily because the great majority of the trains now originate from south of the yards and therefore have to be propelled into the North Yard. Following the remodelling of the 1970s and 1980s there is no connection directly into Toton Yards from the south.

From 2009 both the North Yard and the New Bank sidings became accessible from the south after the whole of the Toton area was re-signalled with a certain amount of remodelling also taking place. It is now also possible to depart south from the North Yard which, as its name would suggest, was designed for trains heading North.

Toton lost the last of its domestic coal traffic in the mid-2000s, when GB Railfreight took over transport originating from Daw Mill Colliery from EWS. Now the main traffic is:

At 23:59 on 26 April 2009 the New Bank yard on the up side of the main lines (below the bank) was closed due to the economic situation and the associated decline in freight traffic. The mothballed yard will be used for storage of assets not currently in use, including locos (Class 60s) and wagons.

References

  1. ↑ "HS2 phase two initial preferred route plan and profile maps". UK Government. Retrieved 2013-01-28.

Further reading

External links

Wikimedia Commons has media related to Toton Traction Maintenance Depot.
This article is issued from Wikipedia - version of the Sunday, March 27, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.