Touschek effect

The Touschek effect describes the scattering and loss of charged particles in a storage ring. It was discovered by Bruno Touschek.[1]

It is determined by the average of the scattering rate around the ring


\frac{1}{\tau} = \frac{1}{C}\oint \frac{1}{\tau_l}(s) \, ds

In fact, since the momentum acceptance for scattering with energy gain may be different from that for scattering with energy loss, the lifetime must be computed by taking into account the positive and negative momentum acceptances, i.e.


\frac{1}{\tau} = \frac{1}{2}\left(\frac{1}{\tau_+} + \frac{1}{\tau_-}\right)

A formula for the local scattering rate, given by Bruck,[2] is


\frac{1}{\tau_l}(s) = \frac{r_0^2 c N}{8\pi\gamma^2\sigma_x\sigma_y\sigma_z\delta_\mathrm{acc}^3}F(\varepsilon_m).

Here, r_0 is the classical particle radius, c is the speed of light, N is the number of particles, \gamma is the relativistic gamma factor, \sigma_{x,y,z} are the RMS horizontal, vertical, and bunch sizes, respectively.


\varepsilon_m = \left(\frac{\delta_\mathrm{acc}}{\gamma\sigma_{x'}}\right)^2

where the function F is given by


F(\varepsilon)=\frac{\sqrt{\varepsilon}}{2}\int_0^1 \left( \frac{2}{u} - \ln\left(\frac{1}{u}\right)-2\right)e^{-\frac{\varepsilon}{u}} \, du

A more accurate formula, valid in a wider range of conditions is derived by Piwinski.[3]

Momentum acceptance calculation

The standard procedure for computing the momentum acceptance via a tracking code was defined in the paper by Belgroune et al. from the SOLEIL synchrotron.[4]

Calculation in beam dynamics codes

In order to compute the Touschek lifetime for a real storage ring, one needs a beam dynamics code. The Piwinski formula may be used together with the Elegant[5] code for example.

References

This article is issued from Wikipedia - version of the Sunday, June 23, 2013. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.