Transparency (graphic)

GIF animation of an Apollonian sphere packing with transparent background

Transparency is possible in a number of graphics file formats. The term transparency is used in various ways by different people, but at its simplest there is "full transparency" i.e. something that is completely invisible. Of course, only part of a graphic should be fully transparent, or there would be nothing to see. More complex is "partial transparency" or "translucency" where the effect is achieved that a graphic is partially transparent in the same way as colored glass. Since ultimately a printed page or computer or television screen can only be one color at a point, partial transparency is always simulated at some level by mixing colors. There are many different ways to mix colors, so in some cases transparency is ambiguous.

In addition, transparency is often an "extra" for a graphics format, and some graphics programs will ignore the transparency.

Raster file formats that support transparency include GIF, PNG, BMP, TIFF, and JPEG 2000, through either a transparent color or an alpha channel.

Most vector formats implicitly support transparency because they simply avoid putting any objects at a given point. This includes EPS and WMF. For vector graphics this may not strictly be seen as transparency, but it requires much of the same careful programming as transparency in raster formats.

More complex vector formats may allow transparency combinations between the elements within the graphic, as well as that above. This includes SVG and PDF.

A suitable raster graphics editor shows transparency by a special pattern, e.g. a checkerboard pattern.

Transparent pixels

One color entry in a single GIF or PNG image's palette can be defined as "transparent" rather than an actual color. This means that when the decoder encounters a pixel with this value, it is rendered in the background color of the part of the screen where the image is placed, also if this varies pixel-by-pixel as in the case of a background image.

Applications include:

an image that is not rectangular can be filled to the required rectangle using transparent surroundings; the image can even have holes (e.g. be ring-shaped)
in a run of text, a special symbol for which an image is used because it is not available in the character set, can be given a transparent background, resulting in a matching background.

The transparent color should be chosen carefully, to avoid items that just happen to be the same color vanishing.

Even this limited form of transparency has patchy implementation, though most popular web browsers are capable of displaying transparent GIF images. This support often does not extend to printing, especially to printing devices (such as PostScript) which do not include support for transparency in the device or driver. Outside the world of web browsers, support is fairly hit-or-miss for transparent GIF files.

Edge limitations of transparent pixels

The edges of characters and other images with transparent background should not have shades of gray: these are normally used for intermediate colors between the color of the letter/image and that of the background, typically shades of gray being intermediate between a black letter and a white background. However, with, for example, a red background the intermediate colors would be dark red. Gray edge pixels would give an ugly and unclear result. For a variable background color there are no suitable fixed intermediate colors.

Partial transparency by alpha channels

PNG and TIFF also allows partial transparency, which solves the edge limitation problem. However, support is even more patchy. Internet Explorer prior to version 7 does not support partial transparency in a PNG graphic. Very few applications correctly process TIFF files with alpha channels.

A major use of partial transparency, but not the only one, is to produce "soft edges" in graphics so that they blend into their background. See also monochrome or with shades of gray and anti-aliasing.

The process of combining a partially transparent color with its background ("compositing") is often ill-defined and the results may not be exactly the same in all cases. For example, where color correction is in use, should the colors be composited before or after color correction?

Transparency by clipping path

An alternative approach to full transparency is to use a Clipping path. A clipping path is simply a shape or outline, that is used in conjunction with the other graphics. Everything inside the path is visible, and everything outside the path is invisible. The path is inherently vector, but can potentially be used to mask both vector and bitmap data. The main usage of clipping paths is in PostScript files.

Compositing calculations

While some transparency specifications are vague, others may give mathematical details of how two colors are to be composited. This gives a fairly simple example of how compositing calculations can work, can produce the expected results, and can also produce surprises.

In this example, two grayscale colors are to be composited. Grayscale values are considered to be numbers between 0.0 (white) and 1.0 (black). To emphasize: this is only one possible rule for transparency. If working with transparency, check the rules in use for your situation.

The color at a point, where color G1 and G2 are to be combined, is $( G1 + G2 ) / 2$ . Some consequences of this are:

Where the colors are equal, the result is the same color because $( G1 + G1 ) /2 = G1$ .
Where one color (G1) is white (0.0), the result is $G2 / 2$ . This will always be less than any nonzero value of G2, so the result is whiter than G2. (This is easily reversed for the case where G2 is white).
Where one color (G1) is black (1.0), the result is $( G2 + 1 ) / 2$ . This will always be more than G2, so the result is more black than G2.
The formula is commutative since $( G1 + G2 ) / 2 = ( G2 + G1 ) / 2$ . This means it does not matter which order two graphics are mixed i.e. which of the two is on the top and which is on the bottom.
The formula is not associative since

( ( G1 + G2 ) / 2 + G3 ) / 2 = G1 / 4 + G2 / 4 + G3 / 2
( G1 + ( G2 + G3 ) / 2 ) / 2 = G1 / 2 + G2 / 4 + G3 / 4

This is important as it means that when combining three or more objects with this rule for transparency, the final color depends very much on the order of doing the calculations.

Although the formula is simple, it may not be ideal. Human perception of brightness is not linear - we do not necessarily consider that a gray value of 0.5 is halfway between black and white. Such details may not matter when transparency is used only to soften edges, but in more complex designs this may be significant. Most people working seriously with transparency will need to see the results and may fiddle with the colors or (where possible) the algorithm to arrive at the results they need.

This formula can easily be generalized to RGB color or CMYK color by applying the formula to each channel separately. For example, final $red = ( R1 + R2 ) / 2$ . But it cannot be applied to all color models. For example Lab color would produce results that were surprising.

An alternative model is that at every point in each element to be combined for transparency there is an associated color and opacity between 0 and 1. For each color channel, you might work with this model: if a channel with intensity $G2$ and opacity $T2$ overlays a channel with intensity $G1$ and opacity $T1$ the result will be a channel with intensity equal to $(1 - T2) * G1 + G2$ , and opacity $1 - (1 - T2) * (1 - T1)$ . Each channel must be multiplied by corresponding alpha value before composition (so called premultiplied alpha). The SVG file specification uses this type of blending, and this is one of the models that can be used in PDF.

Alpha channels may be implemented in this way, where the alpha channel provides an opacity level to be applied equally to all other channels. To work with the above formula, the opacity needs to be scaled to the range 0 to 1, whatever its external representation (often 0 to 255 if using 8 bit samples such as "RGBA").

Transparency in PDF

Starting with version 1.4 of the PDF standard (Adobe Acrobat version 5), transparency (including translucency) is supported. Transparency in PDF files allows to achieve various effects, including adding shadows to objects, making objects semi-transparent and having objects blend into each other or into text. PDF supports many different blend modes, not just the most common averaging method, and the rules for compositing many overlapping objects allow choices (such as whether a group of objects are blended before being blended with the background, or whether each object in turn is blended into the background).

PDF transparency is a very complex model, its original specification by Adobe being over 100 pages long. A key source of complication is that blending objects with different color spaces can be tricky and error-prone as well as cause compatibility issues. Transparency in PDF was designed not to cause errors in PDF viewers that did not understand it – they would simply display all elements as fully opaque. However, this was a two-edged sword as users with older viewers, PDF printers, etc. could see or print something completely different from the original design.

The fact that the PDF transparency model is so complicated means that it is not well supported. This means that RIPs and printers often have problems printing PDFs with transparency. The solution to this is either to rasterize the image or to apply vector transparency flattening to the PDF. However vector transparency flattening is extremely complex and only supported by a few specialist packages.

Transparency in PostScript

The PostScript language has limited support for full (not partial) transparency, depending on the PostScript level. Partial transparency is available with the pdfmark extension,^[1] available on many PostScript implementations.

Level 1

Level 1 PostScript offers transparency via two methods:

A one-bit (monochrome) image can be treated as a mask. In this case the 1-bits can be painted any single color, while the 0-bits are not painted at all. This technique cannot be generalised to more than one color, or to vector shapes.
Clipping paths can be defined. These restrict what part of all subsequent graphics can be seen. This can be used for any kind of graphic, however in level 1, the maximum number of nodes in a path was often limited to 1500, so complex paths (e.g. cutting around the hair in a photograph of a person's head) often failed.

Level 2

Level 2 PostScript adds no specific transparency features. However, by the use of patterns, arbitrary graphics can be painted through masks defined by any vector or text operations. This is, however, complex to implement. In addition, this too often reached implementation limits, and few if any application programs ever offered this technique.

Level 3

Level 3 PostScript adds further transparency option for any raster image. A transparent color, or range of colors, can be applied; or a separate 1-bit mask can be used to provide an alpha channel.

Encapsulated PostScript

EPS files contain PostScript, which may be level 1, 2 or 3 and make use of the features above. A more subtle issue arises with the previews for EPS files that are typically used to show the view of the EPS file on screen. There are viable techniques for setting transparency in the preview. For example, a TIFF preview might use a TIFF alpha channel. However, many applications do not use this transparency information and will therefore show the preview as a rectangle. A semi-proprietary technique pioneered in Photoshop and adopted by a number of pre-press applications is to store a clipping path in a standard location of the EPS, and use that for display.

In addition, few of the programs that generate EPS previews will generate transparency information in the preview.

Some programs have sought to get around this by treating all white in the preview as transparent, but this too is problematic in the cases where some whites are not transparent.

More recently, applications have been appearing that ignore the preview altogether; they therefore get information on which parts of the preview to paint by interpreting the PostScript.

References

↑ Adobe (2005-10-02). "pdfmark Reference Manual" (PDF). Retrieved 2009-08-12.

External links

Image Modification Online - free tool for creating semi-transparent, translucent PNG images

This article is issued from Wikipedia - version of the Tuesday, July 21, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.