Wyoming Highway 220

Wyoming Highway 220 marker

Wyoming Highway 220
Alcova Highway
Route information
Maintained by WYDOT, City of Casper
Length: 72.79 mi[1] (117.14 km)
Major junctions
West end: US 287 / WYO 789 at Muddy Gap Junction
East end: I-25 / US 20 / US 26 / US 87 in Casper
Location
Counties: Carbon, Natrona
Highway system

State highways in Wyoming

WYO 219WYO 221
US 87US 89

Wyoming Highway 220 (WYO 220) is the principal highway connecting the city of Casper to US 287/WYO 789. WYO 220 lies in northwestern Carbon and southern Natrona counties and along the famous Oregon Trail.[1]

Route description

Wyoming Highway 220 begins its western end in Carbon County at US 287/WYO 789 at Muddy Gap Junction and from there heads northeast toward Casper.[1] Nearing 20 miles, Highway 220 leaves Carbon County and enters Natrona County as it nears the north side of the Pathfinder Reservoir and the Pathfinder National Wildlife Refuge.[2] WYO 220 passes north of the reservoir, now traveling more easterly as it comes upon the census-designated place (CDP) of Alcova, the center of population of Wyoming. Also to the south lies Alcova Lake. Past Alcova, WYO 220 turns back northeast and begins to parallel the North Platte River and continue to until it reaches Casper. At 53.17 miles the northern terminus of Wyoming Highway 487 is intersected as 220 continues northeast.[2] Just before entering the Casper city limits, the two-lane highway becomes a divided multi-lane highway with two lanes for each direction of traffic, and becomes known as CY Avenue. Wyoming Highway 258 (Wyoming Boulevard) is intersected at just over 69 miles. Past 258, the multi-lane division continues until just before the intersection of CY Avenue and Poplar Street. At this intersection, WYO 220 follows Poplar Street north.[2] As WYO 220 heads north on Poplar Avenue, US 20 Business/US 26 Business (First Street) is intersected within a mile and three-quarters of a mile later, WYO 220 reaches its eastern end at Interstate 25 (exit 188B) which also carries US 20/US 26/US 87 as well.

The highway is maintained by WYDOT, except for portions of CY Avenue and Poplar Street in Casper, which are maintained locally.

I-25 southbound Exit 188B - WYO 220 in Casper, WY

History

Between 1926 and 1938, what is now Wyoming Highway 220 was part of U.S. Route 87E. In 1938, U.S. 87E was renamed Wyoming Highway 220. Since then, there have been few routing changes except that it was connected to Interstate 25 when the interstate was completed through Casper[1][3]

Major intersections

CountyLocationmikmDestinationsNotes
CarbonMuddy Gap Junction0.000.00 US 287 / WYO 789Western terminus of WYO 220
Natrona 53.1785.57 WYO 487Northern terminus of WYO 487
Casper69.26111.46 WYO 258 (Wyoming Boulevard)
72.12116.07
US 20 Bus. / US 26 Bus. (First Street)
72.79117.14 I-25 / US 20 / US 26 / US 87Exit 188B (I-25/US 20/US 26/US 87)
Eastern terminus of WYO 220
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

References

External links

Route map: Bing / Google

This article is issued from Wikipedia - version of the Sunday, April 24, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.