USCGC Oak (WLB-211)
USCGC Oak underway at sea in May 2010. | |
History | |
---|---|
United States | |
Name: | USCGC Oak (WLB-211) |
Namesake: | Oak tree |
Builder: | Marinette Marine Corporation, Marinette, Wisconsin, U.S.[1][2] |
Laid down: | 30 July 2001 |
Launched: | 26 January 2002[2][3] |
Commissioned: | 7 March 2003 |
Status: | in active service, as of 2016 |
Badge: | |
General characteristics | |
Class & type: | Juniper-class seagoing buoy tender[4] |
Displacement: | 2,000 long tons (2,000 t) full load[3] |
Length: | 225 ft (69 m) |
Beam: | 46 ft (14 m) |
Draft: | 13 ft (4.0 m) |
Propulsion: |
|
Speed: |
|
Range: | 6,000 nmi (11,000 km; 6,900 mi) at 12 kn (22 km/h; 14 mph) |
Complement: | 6 officers, 42 enlisted |
Armament: | 2 x .50 caliber heavy machine guns |
The USCGC Oak (WLB-211) is a United States Coast Guard seagoing buoy tender, the second of her name and the eleventh of the Juniper-class. Home-ported in Charleston, South Carolina, the ship tends buoys along the Southeastern U.S. coast and throughout the Caribbean Sea including Puerto Rico, the U.S. Virgin Islands, Haiti and Guantanamo Bay, Cuba. The Oak also performs other duties, such as maritime border security, marine environmental protection, maritime law enforcement, search and rescue, and domestic icebreaking. She is also responsible for maintenance support of the National Oceanic and Atmospheric Administration (NOAA) National Data Buoy Center's offshore weather buoys.
Construction and characteristics
USCGC Oak was built by the Marinette Marine Corporation in Wisconsin, launched on 26 January 2002 and commissioned in March 2003.[2][3] She has a length of 225 ft (69 m), a beam of 46 ft (14 m), and a draft of 13 ft (4.0 m). Oak is propelled by two Caterpillar diesel engines rated at 3,100 horsepower, and has a top speed of 16 knots.[4] She has a single controllable-pitch propeller, which along with bow and stern thrusters, allow the ship to be maneuvered to set buoys close offshore and in restricted waters. A dynamic global positioning system coupled with machinery plant controls and a chart display and information system allow station-keeping of the ship with an accuracy of within five meters of the planned position without human intervention.[4] Oak is also equipped with an oil-skimming system known as the Spilled Oil Recovery System (SORS), which is used in her mission of maritime environmental protection. The cutter has a 2,875 square foot buoy deck area with a crane that is used for servicing large ocean buoys.[4]
Mission
USCGC Oak has an area of responsibility within the Seventh Coast Guard District which covers the southeast United States, U.S. interests in the Bahamas, Cuba, Haiti, Puerto Rico, and the U.S. Virgin Islands. While her primary mission is servicing aids-to-navigation (ATON), she is also tasked with maritime law enforcement, marine pollution prevention and response, treaty enforcement, defense and homeland security, and search and rescue. In addition her primary mission of servicing ATON, Oak is also tasked with the placement, service, and coverage of NOAA weather buoys off the southeastern coast of the United States and Puerto Rico.[5] Oak has an icebreaking capability of 14 in (0.36 m) at 3 knots and 3 ft (0.91 m) backing and ramming.[3]
History
The keel for the Oak was laid on 30 July 2001 at Marinette Marine Corporation in Marinette, Wisconsin. Oak was launched on 26 January 2002. The ship's sponsor was Mrs. Billye Brown, wife of Congressman Henry E. Brown (R-SC).[2] Oak made the trip from Marinette to Charleston, SC and was commissioned on 7 March 2003, the first Coast Guard cutter to be commissioned following the creation of the Department of Homeland Security.[3]
In January 2008, Oak rescued a disabled sailing vessel off the coast of St. Croix, U.S. Virgin Islands.[5] During the 2009 presidential inauguration of Barack Obama, Oak was designated as the lead waterside security asset utilizing the crew's law enforcement training, the cutter's communications suite and the her icebreaking capabilities on the Potomac River.[5] Oak was involved in Operation Unified Response following the 2010 Haiti earthquake, primarily to clear debris from and repair Port international de Port-au-Prince, the damaged seaport in Port-au-Prince. She was dispatched immediately following the quake, stopping in Miami, Florida on the way to stock with relief supplies.[6] The vessel arrived on 17 January 2010, about six days after the disaster struck.[7] She and the Navy salvage ship USNS Grasp were tasked with returning the wharves to operation. Oak left Naval Air Station Pensacola on 4 May 2010 loaded with oil spill recovery equipment bound for the Deepwater Horizon oil spill in the Gulf of Mexico where she assisted in clean-up efforts.[8] In July and August 2011 Oak successfully used her side-scanning sonar to locate a self-propelled, semi-submersible vessel (SPSS) that had been sunk during a drug interdiction conducted by USCGC Seneca. A Federal Bureau of Investigation dive team aboard Oak retrieved the cocaine cargo of the SPSS and Oak crew members loaded seven metric tons worth approximately US$ 180 million onto her buoy deck.[9] Oak has assisted in clearing waterways and repaired ATON impacted by hurricanes Isabel, Katrina, Charley, Jeanne, and Frances.[3]
See also
Notes
- Citations
- ↑ "Marinette Marine Corp., Marinette WI", Index to U.S. Shipbuilders and Boatbuilders, shipbuildinghistory.com website
- 1 2 3 4 "Manitowoc's Marine Group Launches Coast Guard Cutter", Investor Relations Press Releases, Manitowoc Marine Group
- 1 2 3 4 5 6 "CGC Oak (WLB-211)". U.S. Coast Guard. Retrieved 14 April 2014.
- 1 2 3 4 "225-foot Seagoing Buoy Tender (WLB)", Cutters, Craft & U.S. Coast Guard-Manned Army & Navy Vessels, U.S. Coast Guard Historian's Office
- 1 2 3 "Oak Missions", CGC Oak (WLB-211), U.S. Coast Guard
- ↑ "Coast Guard Continues Haiti Response Efforts", U.S. Coast Guard Atlantic Area, Defense Video & Imagery Distribution System, 15 January 2010
- ↑ "Violence in Haiti Hindering Aid Work", CBS News, 17 January 2010
- ↑ Thrower, Anne. "Images: Gulf Coast oil spill". Navy Media Content Services. Defense Video & Imagery Distribution System. Retrieved 18 April 2014.
- ↑ Braesch, Connie. "First Caribbean drug sub bust". Coast Guard Compass: Official Blog of the U.S. Coast Guard. U. S. Coast Guard. Retrieved 18 April 2014.
- References used
- Braesch, Connie. "First Caribbean drug sub bust". Coast Guard Compass: Official Blog of the U.S. Coast Guard. U. S. Coast Guard. Retrieved 18 April 2014.
- Thrower, Anne. "Images: Gulf Coast oil spill". Navy Media Content Services. Defense Video & Imagery Distribution System. Retrieved 18 April 2014.
- "225-foot Seagoing Buoy Tender (WLB)". Cutters, Craft & U.S. Coast Guard-Manned Army & Navy Vessels. U.S. Coast Guard Historian's Office. Retrieved 9 April 2014.
- "CGC Oak (WLB-211)". U.S. Coast Guard website. Retrieved 14 April 2014.
- "Coast Guard Continues Haiti Response Efforts". U.S. Coast Guard Atlantic Area. Defense Video & Imagery Distribution System. 15 January 2010. Retrieved 18 January 2010.
- "Manitowoc's Marine Group Launches Coast Guard Cutter". Investor Relations Press Releases. Manitowoc Marine Group. 30 January 2002. Retrieved 15 April 2014.
- "Marinette Marine Corp., Marinette WI". Index to U.S. Shipbuilders and Boatbuilders. shipbuildinghistory.com website. Retrieved 9 April 2014.
- "Oak Missions". CGC Oak (WLB-211). U.S. Coast Guard. Retrieved 18 April 2014.
- "Violence in Haiti Hindering Aid Work". CBS News. 17 January 2010. Retrieved 18 January 2010.
External links
Wikimedia Commons has media related to USCGC Oak (WLB-211). |