USCGC Point Clear (WPB-82315)

History
United States
Name: USCGC Point Clear (WPB-82315)
Namesake: Point Clear, Alabama
Owner: United States Coast Guard
Builder: Coast Guard Yard, Curtis Bay, Maryland
Commissioned: 26 April 1961
Decommissioned: 15 September 1969
Honors and
awards:
Fate: Transferred to Republic of Vietnam Navy as RVNS Huỳnh Văn Đức (HQ-702), 15 September 1969[2][3]
General characteristics
Type: Patrol Boat (WPB)
Displacement: 60 tons
Length: 82 ft 10 in (25.25 m)
Beam: 17 ft 7 in (5.36 m) max
Draft: 5 ft 11 in (1.80 m)
Propulsion: 2 × 600 hp (447 kW) Cummins diesel engines
Speed: 16.8 knots (31.1 km/h; 19.3 mph)
Range:
  • 577 nmi (1,069 km) at 14.5 kn (26.9 km/h; 16.7 mph)
  • 1,271 nmi (2,354 km) at 10.7 kn (19.8 km/h; 12.3 mph)
Complement:
  • Domestic service: 8 men
  • Vietnam service: 2 officers, 8 men
Armament:

USCGC Point Clear (WPB-82315) was an 82-foot (25 m) Point class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1961 for use as a law enforcement and search and rescue patrol boat. Since the Coast Guard policy in 1960 was not to name cutters under 100 feet (30 m) in length, it was designated as WPB-82315 when commissioned and acquired the name Point Clear in January 1964 when the Coast Guard started naming all cutters longer than 65 feet (20 m).[2][5]

Construction and design details

Point Clear was built to accommodate an 8-man crew.[6] She was powered by two 600 hp (447 kW) VT600 Cummins diesel main drive engines and had two five-bladed 42 in (1.1 m) propellers. The main drive engines were later replaced by 800 hp (597 kW) VT800 Cummins engines. Water tank capacity was 1,550 U.S. gallons (5,900 L) and fuel tank capacity was 1,840 U.S. gallons (7,000 L) at 95% full.[2][6] Engine exhaust was ported through the transom rather than through a conventional stack and this permitted a 360 degree view from the bridge; a feature that was very useful in search and rescue work as well as a combat environment.[7]

The design specifications for Point Clear included a steel hull for durability and an aluminum superstructure and longitudinally framed construction was used to save weight. Ease of operation with a small crew size was possible because of the non-manned main drive engine spaces. Controls and alarms located on the bridge allowed one man operation of the cutter thus eliminating a live engineer watch in the engine room.[7] Because of design, four men could operate the cutter; however, the need for resting watchstanders brought the crew size to eight men for normal domestic service.[7] The screws were designed for ease of replacement and could be changed without removing the cutter from the water. A clutch-in idle speed of three knots helped to conserve fuel on lengthy patrols and an eighteen knot maximum speed could get the cutter on scene quickly.[8] Air-conditioned interior spaces were a part of the original design for the Point class cutter. Interior access to the deckhouse was through a watertight door on the starboard side aft of the deckhouse. The deckhouse contained the cabin for the officer-in-charge and the executive petty officer.[8] The deckhouse also included a small arms locker, scuttlebutt, a small desk and head. Access to the lower deck and engine room was down a ladder. At the bottom of the ladder was the galley, mess and recreation deck. A watertight door at the front of the mess bulkhead led to the main crew quarters which was ten feet long and included six bunks that could be stowed, three bunks on each side. Forward of the bunks was the crew's head complete with a compact sink, shower and commode.[8] Accommodations for a 13-man crew were installed for Vietnam service.[2][5][9][10]

History

After delivery in 1961, Point Clear was assigned a homeport of San Pedro, California, where she served as a law enforcement and search and rescue patrol boat.[2]

At the request of the United States Navy, in April 1965, she was alerted for service in Vietnam and assigned to Coast Guard Squadron One in support of Operation Market Time along with 16 other Point class cutters.[11][12] While the crew completed overseas training and weapons qualifications at Coast Guard Island and Camp Parks, California, Point Clear was loaded onto a merchant ship, and transported to Subic Bay, Philippines in May 1965 where she was refit for combat service.[2] Shipyard modifications included installation of new single-sideband radio equipment, additional floodlights, small arms lockers, bunks, additional sound-powered phone circuits, and the addition of four M-2 machine guns. The original bow mounted machine gun was replaced with a combination over-under .50 caliber machine gun/81 mm trigger fired mortar that had been developed by the Coast Guard for service in Vietnam.[2][4][12][13] For service in Vietnam, two officers were added to the crew complement to add seniority to the crew in the mission of interdicting vessels at sea.[14]

Point Clear was assigned to Division 11 of Squadron One to be based at An Thoi, a small fishing village on the southern tip of Phú Quốc Island along with Point Banks, Point Comfort, Point Garnet, Point Glover, Point Grey, Point Marone, Point Mast and Point Young. After sea trials, the Division left Subic Bay for Phu Quoc on 17 July 1965 in the company of USS Floyd County (LST-762), their temporary support ship. After almost two weeks at sea, they arrived at their new duty station on 1 August and began patrolling the waters in the Gulf of Thailand near the Cà Mau Peninsula.[15][16] Duty consisted of boarding Vietnamese junks to search for contraband weapons and ammunition and check the identification papers of persons on board. During September 1965, USS Krishna (ARL-38), a repair ship outfitted for the repair of WPB's relieved the USS Floyd County. Also during this time, the WPB's were directed to paint the hulls and superstructures formula 20 deck gray to cover the stateside white paint. This increased the effectiveness of night patrols.[17]

Point Clear was credited with helping stop the overrun of the ARVN outpost at Hà Tiên[18] on 20 October 1965 by firing her machine guns and lobbing mortar rounds near the perimeter of the compound.[19] On 14 February 1966, Point Clear came to the rescue of a U.S. Navy Swift boat which had been sunk by a command detonated mine in shallow water near Rạch Giá.[20] She provided covering fire with machine guns and the 81 mm mortar while Navy personnel from other PCF's evacuated the injured and recovered bodies and equipment from the wreckage.[21]

On 15 September 1969, Point Clear was turned over to the Republic of Vietnam Navy as part of the Vietnamization of the war effort and recommissioned as RVNS Huỳnh Văn Đức (HQ-702).[2][3]

References

Notes
  1. ↑ "Navy Unit Commendation". Navy Unit Commendation. Mobile Riverine Force Association. Retrieved 16 May 2011.
  2. 1 2 3 4 5 6 7 8 Coast Guard Historian website
  3. 1 2 Scotti, p 209
  4. 1 2 William R. Wells II, The United States Coast Guard's Piggyback 81mm Mortar/.50 cal. machine gun, Vietnam Magazine, August 1997
  5. 1 2 Scheina, p 72
  6. 1 2 Scheina, p 71
  7. 1 2 3 Scotti, p 165
  8. 1 2 3 Scotti, p 166
  9. ↑ Scotti, p 10
  10. ↑ Scotti, p 219
  11. ↑ Cutler, p 84
  12. 1 2 Larzelere, p 21
  13. ↑ Cutler, p 82
  14. ↑ Larzelere, p 15
  15. ↑ Kelley, p 5-97
  16. ↑ Larzelere, p 48
  17. ↑ Cutler, p 85
  18. ↑ Kelley, p 5-208
  19. ↑ Larzelere, p 59
  20. ↑ Kelley, p 5-432
  21. ↑ Larzelere, p 95
Bibliography

External links

This article is issued from Wikipedia - version of the Monday, November 02, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.