Upper Yarra Reservoir

Upper Yarra Reservoir
Location Victoria
Coordinates 37°41′S 145°55′E / 37.683°S 145.917°E / -37.683; 145.917Coordinates: 37°41′S 145°55′E / 37.683°S 145.917°E / -37.683; 145.917
Type reservoir
Catchment area 33,670 ha[1]
Basin countries Australia
Surface area 750 ha[1]
Average depth 27 m
Max. depth 77 m
Water volume 200,000 megalitres[1]

The Upper Yarra Reservoir is located east of Melbourne, beyond Warburton within the locality of Reefton. Water from Upper Yarra Reservoir supplies towns in the upper Yarra Valley, and Silvan Reservoir, which transfers water to most parts of Melbourne.

Upper Yarra Reservoir has a capacity of 200,000 megalitres (7,100×10^6 cu ft) and was completed in 1957, initially for the purpose of preventing flooding downstream. In 1888, the Upper Yarra catchment was permanently reserved for water supply purposes. Approval to construct Upper Yarra Reservoir was granted in the early 1940s but due to World War II work did not start until 1948. When the Upper Yarra Reservoir was completed the total storage capacity of Melbourne's system was tripled to nearly 300,000 megalitres.[1]

Upper Yarra Reservoir is also supplied by water transferred from the Thomson River Dam.

As of January 2007, severe drought in south-eastern Australia had resulted in low water levels in the reservoir, which on 5 January 2007 was approximately half full.

As at 22 July 2013, it was at 95,568 megalitres (47.6% full).[2]

See also

References

  1. 1 2 3 4 Upper Yarra Reservoir Factsheet (PDF), Melbourne Water, September 2005, retrieved 14 October 2009 External link in |publisher= (help)
  2. ↑ Melbourne Water - Upper Yarra Reservoir
This article is issued from Wikipedia - version of the Saturday, February 20, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.