Vinyl composition tile

Vinyl composition tile (VCT) is a finished flooring material used primarily in commercial and institutional applications. Modern vinyl floor tiles and sheet flooring and versions of those products sold since the early 1980s are composed of colored polyvinyl chloride (PVC) chips formed into solid sheets of varying thicknesses (1/8" is most common) by heat and pressure. Floor tiles are cut into modular shapes such 12" x 12" squares or 12" x 24" rectangles. In installation the floor tiles or sheet flooring are applied to a smooth, leveled sub-floor using a specially formulated vinyl adhesive or tile mastic that remains pliable. In commercial applications some tiles are typically waxed and buffed using special materials and equipment.

Modern vinyl floor tile is frequently chosen for high-traffic areas because of its low cost, durability, and ease of maintenance. Vinyl tiles have high resilience to abrasion and impact damage and can be repeatedly refinished with chemical strippers and mechanical buffing equipment. If properly installed, tiles can be easily removed and replaced when damaged. Tiles are available in a variety of colors from several major flooring manufacturers. Some manufacturers have created vinyl tiles that very closely resemble wood, stone, terrazzo, and concrete and literally hundreds of varying patterns.

In the debate over the "greenness" of building materials, vinyl has become a divisive topic. Burning the material can release dioxins and other hazardous chemicals. Harmful additives such as phthalates and heavy metals can leach out of the roughly 1.5 million tons (1.4 million metric tons) of vinyl discarded each year just in the United States.[1]

The chief health concerns most sources cite for contemporary PVC building products such as vinyl floor tiles or vinyl building siding, trim and windows appear to be health risks to the workers during production and health risks later (HCl and dioxin) if the material is burned as waste or in a house fire.

History

In 1894, Philadelphia architect Frank Furness patented a system for rubber floor tiles. These tiles were durable, sound-deadening, easy to clean and easy to install. However, they stained easily and deteriorated over time from exposure to oxygen, ozone and solvents, and were not suitable for use in basements where alkaline moisture was present.

In 1926, Waldo Semon, working in the United States, invented plasticized polyvinyl chloride.[2] Polyvinyl chloride (PVC) is a plastic containing carbon, hydrogen and chlorine. It is produced by the process of polymerisation. Molecules of vinyl chloride monomers combine to make long chain molecules of polyvinyl chloride.[3] Polyvinyl chloride (PVC) based floor coverings, commonly known as vinyls [4] made its big splash when a vinyl composition tile was displayed at the Century of Progress Exposition in Chicago. Because of the scarcity of vinyl during the war years, vinyl flooring was not widely marketed until the late 1940s, eventually became the most popular choice for flooring in just about any hard-surface application.[5]

Luxury Vinyl Tile (LVT)

LVT is an industry term, not a standard, for vinyl that realistically mimics the appearance of natural materials with an added layer to improve wear and performance. The extra layer of protection is usually a heavy film covered with a UV-cured urethane that makes it scuff, stain and scratch resistant.[6]

See also

References

  1. ↑ Vinyl: Any Color but Green at Architecture Week
  2. ↑ "History Of Vinyl".
  3. ↑ "PVC and plasticisers".
  4. ↑ "Chemical Works linoleum, vinyl, bitumen-based floor covering manufacturing works" (PDF).
  5. ↑ "Vinyl Flooring".
  6. ↑ "Consumer Reports tests vinyl tile for safety, durability". Plastic News. Retrieved 27 August 2015.
This article is issued from Wikipedia - version of the Thursday, March 03, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.