Viscous remanent magnetization

Viscous remanent magnetization (Abbreviated VRM), also known as viscous magnetization, is remanence that is acquired by ferromagnetic materials by sitting in a magnetic field for some time. The natural remanent magnetization of an igneous rock can be altered by this process. This is generally an unwanted component and some form of stepwise demagnetization must be used to remove it.[1]

Origin of VRM

Viscous remanent magnetization is the result of jumps between magnetic states driven by thermal fluctuations. In the simplest case, there is a single characteristic time τ called the thermal relaxation time. If the starting magnetization is M0 and the magnetization in equilibrium is Meq, the magnetization after a time t is

M(t) = M_0 + \left(M_\text{eq}-M_0\right)\exp(-t/\tau).

If M0 is a natural remanent magnetization (NRM) acquired in the Earth's field at one time, and Meq is the equilibrium magnetization in a different field at some later time, the change in remanence M(t) -M0 is the VRM.[1]

The above equation is applicable to the simplest single domain magnets, those described by the Stoner–Wohlfarth model. The relaxation time τ depends on factors such as the size of the magnet and its magnetic anisotropy. Rocks have collections of magnetic minerals with varying size and anisotropy, and therefore a broad spectrum of relaxation times. The magnetization tends to have a logarithmic dependence on time, so the rate of change is often represented by a viscosity coefficient[1]

S = \frac{\partial M}{\partial \log t}.

Significance for paleomagnetism

Main article: Paleomagnetism

Paleomagnetists are interested in the primary natural remanent magnetization (NRM) in a rock, acquired when the rock was originally formed. Viscous remanent magnetization is regarded as noise. Any component of the NRM that is in the direction of the present Earth's field is suspect because it may have been acquired since the last geomagnetic reversal. Fortunately, VRM is often removed by the first steps in a stepwise thermal demagnetization of the NRM. [1]

VRM may also be acquired in the laboratory while measuring the NRM. To avoid this, paleomagnetists make their measurements in a magnetically shielded environment. Often the magnetometer is housed in a room with walls made of mu-metal.[2]

See also

Notes

  1. 1 2 3 4 Dunlop & Özdemir 1997, Chapter 10
  2. ↑ MIT 2011

References

  • Dunlop, David J.; Özdemir, Özden (1997). Rock Magnetism: Fundamentals and Frontiers. Cambridge Univ. Press. ISBN 0-521-32514-5. 
  • "Paleomagnetic instruments". Paleomagnetism laboratory, Department of Earth, Planetary and Atmospheric Sciences, MIT. Retrieved September 2011. 
This article is issued from Wikipedia - version of the Wednesday, April 23, 2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.