WD Austerity 2-10-0

WD Austerity 2-10-0

90775 on the North Norfolk Railway. Despite having the appearance of a British Railways locomotive, the highest numbered BR engine was 90774, and this example was repatriated from Greece.
Type and origin
Power type Steam
Designer R. A. Riddles
Builder North British Locomotive Company
Serial number 25436–25535, 25596–25645
Build date 1943–1945
Total produced 150
Specifications
Configuration 2-10-0
UIC class 1′E h
Gauge 4 ft 8 12 in (1,435 mm) standard gauge
Leading dia 2 ft 9 in (838 mm)
Driver diameter 4 ft 8 12 in (1,435 mm)
Length 67 ft 6 14 in (20.58 m) over buffers
Axle load 13 long tons 9 cwt (30,100 lb or 13.7 t)
Adhesive weight 67 long tons 3 cwt (150,400 lb or 68.2 t) full
Loco weight 78 long tons 6 cwt (175,400 lb or 79.6 t) full
Tender weight 55 long tons 10 cwt (124,300 lb or 56.4 t) full
Fuel type Coal
Fuel capacity 9 long tons 0 cwt (20,200 lb or 9.1 t)
Water cap 5,000 imp gal (23,000 L; 6,000 US gal)
Firebox:
  Firegrate area
40 sq ft (3.7 m2)
Boiler pressure 225 lbf/in2 (1.55 MPa)
Heating surface:
  Tubes
1,170 sq ft (109 m2)
  Flues 589 square feet (54.7 m2)
  Firebox 192 sq ft (17.8 m2)
Superheater:
  Heating area
423 sq ft (39.3 m2)
Cylinders Two, outside
Cylinder size 19 in × 28 in (483 mm × 711 mm)
Valve gear Walschaerts
Valve type 10-inch (250 mm) piston valves
Performance figures
Tractive effort 34,215 lbf (152.20 kN)
Career
Operators WD » NS, BR, SEK, CFS
Power class BR: 8F

The War Department (WD) "Austerity" 2-10-0 is a type of heavy freight steam locomotive that was introduced during the Second World War in 1943.

Background

The Austerity 2-10-0 was based on the Austerity 2-8-0, and was designed to have interchangeable parts by R.A. Riddles. It had the same power output as the 2-8-0 but a lighter axle load, making it suitable for secondary lines.

Design

It had a parallel boiler and round-topped firebox. While the 2-8-0 had a narrow firebox, the 2-10-0 had a wide firebox placed above the driving wheels. This arrangement was common in the USA (e.g. the USRA 0-8-0) but unusual in Britain. In Britain, wide fireboxes were usually used only where there was a trailing axle, e.g. in 4-4-2 and 4-6-2 types. One exception was the GER Decapod.

These were the first 2-10-0 locomotives to work in Great Britain, and the first major class of ten-coupled engines they had been preceded by two 0-10-0 locomotives; the Great Eastern Railway's Decapod and the Midland Railway's Lickey Banker.

The 2-10-0 wheel arrangement was later used by Riddles when he designed the BR standard class 9F. This, too, had a wide firebox placed above the driving wheels.

Construction

Two batches were built by the North British Locomotive Company, the first batch of 100 introduced in 1943/1944 and the second batch of 50 in 1945. Their WD Nos were 73650–73799.

20 of the first batch were sent to the Middle East. During running-in they worked in Britain, but their length made them unsuitable. Most saw service with the British Army in France after D-Day.

Post-war service

After the war the 150 locomotives were distributed as follows, the majority going to the Netherlands:

No. of engines Country Company Class
103 Netherlands Nederlandse Spoorwegen (NS) NS Series 5000II
25 Great Britain British Railways (BR) BR ex-WD Austerity 2-10-0
16 Greece Hellenic State Railways (SEK) SEK Class Λβ
4 Syria Chemins de Fer Syriens (CFS) CFS Class 150.6

Netherlands

In 1946, the Netherlands bought those in continental Europe. They formed the NS Series 5000II, and were numbered 5001-103. They had a short working life, the last being withdrawn in 1952.

British Railways

After the war, the British Railways (BR) bought twenty-five locomotives. These were initially numbered 73774-73798 but later re-numbered 90750-74. They were mostly operated by BR's Scottish Region on heavy freight trains and were all withdrawn between 1961 and 1962.

Greece

Main article: SEK Class Λβ

Sixteen of the twenty Middle East locomotives went to Greece, where they formed Class Λβ of the Hellenic State Railways, numbered Λβ951 to Λβ966.

Syria

The remaining 4 Middle East locomotives remained in Syria and operated on the Chemins de Fer Syriens (CFS). These engines formed the CFS Class 150.6.

Further WD services

In the 1952 WD renumbering scheme, the two remaining in WD service (at the Longmoor Military Railway), Nos. 73651 and 73797, were renumbered 600 and 601 respectively. The also received names: 600 Gordon and 601 Kitchener.

Preservation

LMR 600 Gordon has survived and has been steamed on the Severn Valley Railway, though as of 2005 it is out of service, cosmetically restored and on display in the Engine House.

Two more have been repatriated from Greece. One has been numbered 90775, one higher than the last BR engine, and has carried the name Sturdee (as WD/LMR No. 601 before being numbered 90775). Under overhaul on North Norfolk Railway. The other is WD No. (7)3672 which has been named Dame Vera Lynn. The loco is currently awaiting overhaul at Grosmont, NYMR.

The 4th one in preservation WD 73755 (NS 5085) survives in the Dutch Railway Museum (Nederlands Spoorwegmuseum) in Utrecht. It carried the nameplate Longmoor, after the Royal Engineer's base at Longmoor, with the coat of arms of the Royal Engineers above.

Numbers Name Location
WD NS SEK BR LMR
(7)3651 600 Gordon On display in the Engine House, Severn Valley Railway, England
(7)3652 Λβ951 90775* Sturdee* (name not currently carried)[1] Undergoing overhaul, North Norfolk Railway, Norfolk, England
(7)3672 Λβ960 Dame Vera Lynn* Awaiting overhaul at Grosmont North Yorkshire Moors Railway, Yorkshire, England
73755 5085 Longmoor Nederlands Spoorwegmuseum, Utrecht, Netherlands

* Name or number applied after preservation

Notes and references

Further reading

External links

Wikimedia Commons has media related to WD Austerity 2-10-0.
This article is issued from Wikipedia - version of the Sunday, November 29, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.