Wave field synthesis

WFS Principle

Wave field synthesis (WFS) is a spatial audio rendering technique, characterized by creation of virtual acoustic environments. It produces "artificial" wave fronts synthesized by a large number of individually driven speakers. Such wave fronts seem to originate from a virtual starting point, the virtual source or notional source. Contrary to traditional spatialization techniques such as stereo or surround sound, the localization of virtual sources in WFS does not depend on or change with the listener's position.

Physical fundamentals

WFS is based on the Huygens–Fresnel principle, which states that any wave front can be regarded as a superposition of elementary spherical waves. Therefore, any wave front can be synthesized from such elementary waves. In practice, a computer controls a large array of individual loudspeakers and actuates each one at exactly the time when the desired virtual wave front would pass through it.

The basic procedure was developed in 1988 by Professor A.J. Berkhout at the Delft University of Technology.[1] Its mathematical basis is the Kirchhoff-Helmholtz integral. It states that the sound pressure is completely determined within a volume free of sources, if sound pressure and velocity are determined in all points on its surface.

\boldsymbol{P}(w,z)=\iint_{dA} \left(G(w,z \vert z') \frac{\partial}{\partial n} P(w,z')- P(w,z') \frac{\partial}{\partial n} G(w,z \vert z') \right)dz'

Therefore any sound field can be reconstructed, if sound pressure and acoustic velocity are restored on all points of the surface of its volume. This approach is the underlying principle of holophony.

For reproduction, the entire surface of the volume would have to be covered with closely spaced monopole and dipole loudspeakers, each individually driven with its own signal. Moreover, the listening area would have to be anechoic, in order to comply with the source-free volume assumption. In practice, this is hardly feasible.

According to Rayleigh II the sound pressure is determined in each point of a half-space, if the sound pressure in each point of its dividing plane is known. Because our acoustic perception is most exact in the horizontal plane, practical approaches generally reduce the problem to a horizontal loudspeaker line, circle or rectangle around the listener.

The origin of the synthesized wave front can be in any point on the horizontal plane of the loudspeakers. It represents the virtual acoustic source, which hardly differs from a material acoustic source at the same position. Unlike conventional (stereo) reproduction, the virtual sources do not move along if the listener moves in the room. For sources behind the loudspeakers, the array will produce convex wave fronts. Sources in front of the speakers can be rendered by concave wave fronts that focus in the virtual source and diverge again. Hence the reproduction inside the volume is incomplete - it breaks down if the listener sits between speakers and inner source.

Procedural advantages

By means of level and time information stored in the impulse response of the recording room or derived from a model-based mirror-source approach, a sound field with very stable position of the acoustic sources can be established by wave field synthesis. In principle, it would be possible to establish a virtual copy of a genuine sound field indistinguishable from the real sound. Changes of the listener position in the rendition area would produce the same impression as an appropriate change of location in the recording room. Listeners are no longer relegated to a "sweet spot" area within the room.

The Moving Picture Expert Group standardized the object-oriented transmission standard MPEG-4 which allows a separate transmission of content (dry recorded audio signal) and form (the impulse response or the acoustic model). Each virtual acoustic source needs its own (mono) audio channel. The spatial sound field in the recording room consists of the direct wave of the acoustic source and a spatially distributed pattern of mirror acoustic sources caused by the reflections by the recording room surfaces. Reducing that spatial mirror source distribution onto a few transmitting channels causes a significant loss of spatial information. Much more accurately this spatial distribution can be synthesized by the rendition side.

Concerning the conventional channel-orientated rendition procedures, WFS provides a clear advantage: "Virtual panning spots" called virtual acoustic sources guided by the signal content of the associated channels can be positioned far beyond the material rendition area. That reduces the influence of the listener position because the relative changes in angles and levels are clearly smaller as with closely fixed material loudspeaker boxes. This extends the sweet spot considerably; it can now nearly cover the entire rendition area. The procedure of the wave field synthesis thus is not only compatible, it clearly improves the reproduction for the conventional transmission methods.

Remaining problems

The most perceptible difference concerning the original sound field is the reduction of the sound field to two dimensions along the horizontal of the loudspeaker lines. This is particularly noticeable for reproduction of ambience as acoustic damping is required in the rendition area for accurate synthesis. The damping, however, does not complement natural acoustic sources.

Sensitivity to room acoustics

Since WFS attempts to simulate the acoustic characteristics of the recording space, the acoustics of the rendition area must be suppressed. One possible solution is to arrange the walls in an absorbing and non-reflective way. The second possibility is playback within the near field. For this to work effectively the loudspeakers must couple very closely at the hearing zone or the diaphragm surface must be very large.

High cost

A further problem is high cost. A large number of individual transducers must be very close together. Otherwise spatial aliasing effects become audible. This is a result of having a finite number of transducers (and hence elementary waves).

Aliasing

For more details on this topic, see Aliasing.

There are undesirable spatial distortions caused by position-dependent narrow-band break-downs in the frequency response within the rendition range – in a word, aliasing. Their frequency depends on the angle of the virtual acoustic source and on the angle of the listener to the loudspeaker arrangement:

f_{\text{alias}}=\frac{c}{\Delta x \left| \sin\Theta^{\text{sec}} - \sin\Theta^{\text{v}} \right|}

For aliasing free rendition in the entire audio range thereafter a distance of the single emitters below 2 cm would be necessary. But fortunately our ear is not particularly sensitive to spatial aliasing. A 10–15 cm emitter distance is generally sufficient.[2] On the other hand the size of the emitter field does limit the representation range; outside of its borders no virtual acoustic sources be produced.

Truncation effect

Another cause for disturbance of the spherical wavefront is the "Truncation Effect". Because the resulting wavefront is a composite of elementary waves, a sudden change of pressure can occur if no further speakers deliver elementary waves where the speaker row ends. This causes a 'shadow-wave' effect. For virtual acoustic sources placed in front of the loudspeaker arrangement this pressure change hurries ahead of the actual wave front whereby it becomes clearly audible.

In signal processing terms, this is spectral leakage in the spatial domain and is caused by application of a rectangular function as a window function on what would otherwise be an infinite array of speakers. The shadow wave can be reduced if the volume of the outer loudspeakers is reduced; this corresponds to using a different window function which tapers off instead of being truncated – see the discussion in spectral leakage and window function articles for how choice of window function affects signal response.

Research and market maturity

2-dimensional placement of wavefront synthesis speaker arrays.

Early development of WFS was started in from 1988 by the Delft University. Further work was carried out in the context of the CARROUSO project by the European Union (January 2001 to June 2003), which included ten institutes. The WFS sound system IOSONO was developed by the Fraunhofer Institute for digital media technology (IDMT) by the Technical University of Ilmenau.

Loudspeaker arrays implementing WFS have been installed in some cinemas and theatres and in public spaces with good success. The first live WFS transmission took place in July 2008, recreating an organ recital at Cologne Cathedral in lecture hall 104 of the Technical University of Berlin.[3] The room contains the world’s largest speaker system with 2700 loudspeakers on 832 independent channels.

Development of home-audio application of WFS has only recently begun, and largescale adoption is still to be seen.

See also

References

  1. ↑ "Wave Field Synthesis". doi:10.1109/3DTV.2009.5069680.
  2. ↑ "Audio Engineering Society Convention Paper, Spatial Aliasing Artifacts Produced by Linear and Circular Loudspeaker Arrays used for Wave Field Synthesis" (PDF). Retrieved 2012-02-03.
  3. ↑ "Birds on the wire – Olivier Messiaen's Livre du Saint Sacrément in the world's first wave field synthesis live transmission (technical project report)" (PDF). 2008. Retrieved 2013-03-27.

Further reading

External links

This article is issued from Wikipedia - version of the Monday, March 14, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.