Wilkinson's polynomial

Plot of Wilkinson's polynomial

Plot of sgn(w(x)) log(1 + |w(x)|)

In numerical analysis, Wilkinson's polynomial is a specific polynomial which was used by James H. Wilkinson in 1963 to illustrate a difficulty when finding the root of a polynomial: the location of the roots can be very sensitive to perturbations in the coefficients of the polynomial.

The polynomial is

$w(x) = \prod_{i=1}^{20} (x - i) = (x-1)(x-2) \ldots (x-20).$

Sometimes, the term Wilkinson's polynomial is also used to refer to some other polynomials appearing in Wilkinson's discussion.

Background

Wilkinson's polynomial arose in the study of algorithms for finding the roots of a polynomial

$p(x) = \sum_{i=0}^n c_i x^i.$

It is a natural question in numerical analysis to ask whether the problem of finding the roots of p from the coefficients c_i is well-conditioned. That is, we hope that a small change in the coefficients will lead to a small change in the roots. Unfortunately, this is not the case here.

The problem is ill-conditioned when the polynomial has a multiple root. For instance, the polynomial x² has a double root at x = 0. However, the polynomial x²−ε (a perturbation of size ε) has roots at ±√ε, which is much bigger than ε when ε is small.

It is therefore natural to expect that ill-conditioning also occurs when the polynomial has zeros which are very close. However, the problem may also be extremely ill-conditioned for polynomials with well-separated zeros. Wilkinson used the polynomial w(x) to illustrate this point (Wilkinson 1963).

In 1984, he described the personal impact of this discovery:

Speaking for myself I regard it as the most traumatic experience in my career as a numerical analyst.^[1]

Wilkinson's polynomial is often used to illustrate the undesirability of naively computing eigenvalues of a matrix by first calculating the coefficients of the matrix's characteristic polynomial and then finding its roots, since using the coefficients as an intermediate step may introduce an extreme ill-conditioning even if the original problem was well conditioned.^[2]

Conditioning of Wilkinson's polynomial

Wilkinson's polynomial

$w(x) = \prod_{i=1}^{20} (x - i) = (x-1)(x-2) \ldots (x-20)$

clearly has 20 roots, located at x = 1, 2, …, 20. These roots are far apart. However, the polynomial is still very ill-conditioned.

Expanding the polynomial, one finds

$w(x) = \,\!$	$x^{20}-210 x^{19}+20615 x^{18}-1256850 x^{17}[phone] x^{16} \,\!$
	${}-1672280820 x^{15}[phone] x^{14}-756111184500 x^{13} \,\!$
	${}[phone] x^{12}-135585182899530 x^{11} \,\!$
	${}+1307535010540395 x^{10}-10142299865511450 x^9 \,\!$
	${}+63030812099294896 x^8-311333643161390640 x^7 \,\!$
	${}+1206647803780373360 x^6-3599979517947607200 x^5 \,\!$
	${}+8037811822645051776 x^4-12870931245150988800 x^3 \,\!$
	${}+13803759753640704000 x^2-8752948036761600000 x \,\!$
	${}+2432902008176640000. \,\!$

If the coefficient of x¹⁹ is decreased from −210 by 2⁻²³ to −210.0000001192, then the polynomial value w(20) decreases from 0 to −2⁻²³20¹⁹ = −6.25×10¹⁷, and the root at x = 20 grows to x ≈ 20.8 . The roots at x = 18 and x = 19 collide into a double root at x ≈ 18.62 which turns into a pair of complex conjugate roots at x ≈ 19.5±1.9i as the perturbation increases further. The 20 roots become (to 5 decimals)

1.00000	2.00000	3.00000	4.00000	5.00000
6.00001	6.99970	8.00727	8.91725	20.84691
10.09527± 0.64350i	11.79363± 1.65233i	13.99236± 2.51883i	16.73074± 2.81262i	19.50244± 1.94033i

Some of the roots are greatly displaced, even though the change to the coefficient is tiny and the original roots seem widely spaced. Wilkinson showed by the stability analysis discussed in the next section that this behavior is related to the fact that some roots α (such as α = 15) have many roots β that are "close" in the sense that |α−β| is smaller than |α|.

Wilkinson chose the perturbation of 2⁻²³ because his Pilot ACE computer had 30-bit floating point significands, so for numbers around 210, 2⁻²³ was an error in the first bit position not represented in the computer. The two real numbers, −210 and −210 − 2⁻²³, are represented by the same floating point number, which means that 2⁻²³ is the unavoidable error in representing a real coefficient close to −210 by a floating point number on that computer. The perturbation analysis shows that 30-bit coefficient precision is insufficient for separating the roots of Wilkinson's polynomial.

Stability analysis

Suppose that we perturb a polynomial p(x) = Π (x−α_j) with roots α_j by adding a small multiple t·c(x) of a polynomial c(x), and ask how this affects the roots α_j. To first order, the change in the roots will be controlled by the derivative

${d\alpha_j \over dt} = -{c(\alpha_j)\over p^\prime(\alpha_j)}.$

When the derivative is large, the roots will be less stable under variations of t, and conversely if this derivative is small the roots will be stable. In particular, if α_j is a multiple root, then the denominator vanishes. In this case, α_j is usually not differentiable with respect to t (unless c happens to vanish there), and the roots will be extremely unstable.

For small values of t the perturbed root is given by the power series expansion in t

$\alpha_j + {d\alpha_j \over dt}t +{d^2\alpha_j \over dt^2}{t^2\over 2!} + \cdots$

and one expects problems when |t| is larger than the radius of convergence of this power series, which is given by the smallest value of |t| such that the root α_j becomes multiple. A very crude estimate for this radius takes half the distance from α_j to the nearest root, and divides by the derivative above.

In the example of Wilkinson's polynomial of degree 20, the roots are given by α_j = j for j = 1, …, 20, and c(x) is equal to x¹⁹. So the derivative is given by

${d\alpha_j \over dt} = -{\alpha_j^{19}\over \prod_{k\ne j}(\alpha_j-\alpha_k)} = -\prod_{k\ne j}{\alpha_j\over \alpha_j-\alpha_k} . \,\!$

This shows that the root α_j will be less stable if there are many roots α_k close to α_j, in the sense that the distance |α_j−α_k| between them is smaller than |α_j|.

Example. For the root α₁ = 1, the derivative is equal to 1/19! which is very small; this root is stable even for large changes in t. This is because all the other roots β are a long way from it, in the sense that |α₁−β| = 1, 2, 3, ..., 19 is larger than |α₁| = 1. For example even if t is as large as –10000000000, the root α₁ only changes from 1 to about 0.99999991779380 (which is very close to the first order approximation 1+t/19! ≈ 0.99999991779365). Similarly, the other small roots of Wilkinson's polynomial are insensitive to changes in t.

Example. On the other hand, for the root α₂₀ = 20, the derivative is equal to −20¹⁹/19! which is huge (about 43000000), so this root is very sensitive to small changes in t. The other roots β are close to α₂₀, in the sense that |β − α₂₀| = 1, 2, 3, ..., 19 is less than |α₂₀| = 20. For t = −2⁻²³ the first-order approximation 20 − t·20¹⁹/19! = 25.137... to the perturbed root 20.84... is terrible; this is even more obvious for the root α₁₉ where the perturbed root has a large imaginary part but the first-order approximation (and for that matter all higher-order approximations) are real. The reason for this discrepancy is that |t| ≈ 0.000000119 is greater than the radius of convergence of the power series mentioned above (which is about 0.0000000029, somewhat smaller than the value 0.00000001 given by the crude estimate) so the linearized theory does not apply. For a value such as t = 0.000000001 that is significantly smaller than this radius of convergence, the first-order approximation 19.9569... is reasonably close to the root 19.9509...

At first sight the roots α₁ = 1 and α₂₀ = 20 of Wilkinson's polynomial appear to be similar, as they are on opposite ends of a symmetric line of roots, and have the same set of distances 1, 2, 3, ..., 19 from other roots. However the analysis above shows that this is grossly misleading: the root α₂₀ = 20 is less stable than α₁ = 1 (to small perturbations in the coefficient of x¹⁹) by a factor of 20¹⁹ = 5242880000000000000000000.

Wilkinson's second example

The second example considered by Wilkinson is

$w_2(x) = \prod_{i=1}^{20} (x - 2^{-i}) = (x-2^{-1})(x-2^{-2}) \ldots (x-2^{-20}).$

The twenty zeros of this polynomial are in a geometric progression with common ratio 2, and hence the quotient

$\alpha_j\over \alpha_j-\alpha_k$

cannot be large. Indeed, the zeros of w₂ are quite stable to large relative changes in the coefficients.

The effect of the basis

The expansion

$p(x) = \sum_{i=0}^n c_i x^i$

expresses the polynomial in a particular basis, namely that of the monomials. If the polynomial is expressed in another basis, then the problem of finding its roots may cease to be ill-conditioned. For example, in a Lagrange form, a small change in one (or several) coefficients need not change the roots too much. Indeed, the basis polynomials for interpolation at the points 0, 1, 2, …, 20 are

$\ell_k(x) = \prod_{i \in \{0,\ldots,20\} \setminus \{k\}} \frac{(x - i)}{(k - i)}, \qquad\mbox{for}\quad k=0,\ldots,20.$

Every polynomial (of degree 20 or less) can be expressed in this basis:

$p(x) = \sum_{i=0}^{20} d_i \ell_i(x).$

For Wilkinson's polynomial, we find

$w(x) = (20!) \ell_0(x) = \sum_{i=0}^{20} d_i \ell_i(x) \quad\mbox{with}\quad d_0=(20!) ,\, d_1=d_2= \ldots =d_{20}=0.$

Given the definition of the Lagrange basis polynomial ℓ₀(x), a change in the coefficient d₀ will produce no change in the roots of w. However, a perturbation in the other coefficients (all equal to zero) will slightly change the roots. Therefore, Wilkinson's polynomial is well-conditioned in this basis.

Notes

1. Wilkinson, James H. (1984). "The perfidious polynomial". In ed. by Gene H. Golub. Studies in Numerical Analysis. Mathematical Association of America. p. 3. ISBN 978-0-88385-126-5.
2. Trefethen, Lloyd N.; Bau, David (1997), Numerical Linear Algebra, SIAM

References

Wilkinson discussed "his" polynomial in

• J. H. Wilkinson (1959). The evaluation of the zeros of ill-conditioned polynomials. Part I. Numerische Mathematik 1:150-166.
• J. H. Wilkinson (1963). Rounding Errors in Algebraic Processes. Englewood Cliffs, New Jersey: Prentice Hall.

It is mentioned in standard text books in numerical analysis, like

• F. S. Acton, Numerical methods that work, ISBN 978-0-88385-450-1, page 201.

Other references:

• Ronald G. Mosier (July 1986). Root neighborhoods of a polynomial. Mathematics of Computation 47(175):265–273.
• J. H. Wilkinson (1984). The perfidious polynomial. Studies in Numerical Analysis, ed. by G. H. Golub, pp. 1–28. (Studies in Mathematics, vol. 24). Washington, D.C.: Mathematical Association of America.

A high-precision numerical computation is presented in:

• Ray Buvel, Polynomials And Rational Functions, part of the RPN Calculator User Manual (for Python), retrieved on 29 July 2006.