Wolter telescope

A Wolter telescope is a telescope for X-rays using only grazing incidence optics. Visible light telescopes are built with either lenses or parabolic mirrors at nearly normal incidence (that is, a nearly perpendicular angle of reflection). Neither works well for X-rays. Lenses for visible light are made of a transparent material with an index of refraction substantially different from one, but there is no equivalent material for x-rays. Conventional mirror telescopes work poorly in the X-rays as well, since the light hits the mirrors at near-normal incidence, where the X-rays are transmitted or absorbed, not reflected.

X-rays mirrors can be built, but only if the angle from the plane of reflection is very low (typically 10 arc-minutes to 2 degrees).[1] These are called glancing (or grazing) incidence mirrors. In 1952, Hans Wolter outlined three ways a telescope could be built using only this kind of mirror.[2][3] These are called Wolter telescopes of type I, II, and III. Each has different advantages and disadvantages.[4]

Wolter's key discovery was that by using two mirrors it is possible to create a telescope with a usably wide field of view. In contrast, a grazing incidence telescope with just one parabolic mirror could focus X-rays, but only very close to the centre of the field of view as it would suffer from extreme coma.

See also

References

  1. ↑ Kulinder Pal Singh. "Techniques in X-ray Astronomy" (pdf).
  2. ↑ Wolter, H. (1952). "Glancing Incidence Mirror Systems as Imaging Optics for X-rays". Annalen der Physik 10: 94. Bibcode:1952AnP...445...94W. doi:10.1002/andp.19524450108.
  3. ↑ Wolter, H. (1952). "A Generalized Schwarzschild Mirror System For Use at Glancing Incidence for X-ray Imaging". Annalen der Physik 10: 286. Bibcode:1952AnP...445..286W. doi:10.1002/andp.19524450410.
  4. ↑ Petre, Rob. "X-ray Imaging Systems". NASA.


This article is issued from Wikipedia - version of the Tuesday, March 01, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.