Zauner OZ-5 One-Yankee

OZ-5 One-Yankee
Role Glider
National origin United States
Designer Otto Zauner
Introduction 1974
Status Production completed
Number built One
Developed from Schreder RS-15

The Zauner OZ-5 One-Yankee is an American high-wing, T-tailed, single seat, 15 metre class glider that was designed and constructed by Otto Zauner.[1][2]

Design and development

Zauner designed a new fuselage and tail surfaces to mate with a set of Schreder RS-15 wings that he had built, producing a new aircraft.[1]

The stock RS-15 wings of 15 m (49.2 ft) span are built from foam and sheet aluminium and feature flaps and a Schreder 1 airfoil, which is a modified Wortmann section. The fuselage consists of a welded steel tube cockpit cage, surrounded by a fiberglass shell. The rear fuselage is tapered and is made from sheet aluminium, as are the tail surfaces. The fin is highly swept and mounts the tailplane and elevators in T-tail configuration. The wings are carefully faired into the fuselage using integral fuselage fillets. The landing gear is a retractable monowheel.[1]

Only one OZ-5 was built and it was registered in 1974 with the Federal Aviation Administration in the Experimental - Amateur-built category.[1][2]

Operational history

The designer completed two diamond badge legs in the OZ-5. As of July 2011 the aircraft remained on the FAA registry, still owned by Zauner.[1][2]

Specifications (OZ-5)

Data from Soaring[1]

General characteristics

Performance

See also


Related lists

References

  1. 1 2 3 4 5 6 Said, Bob: 1983 Sailplane Directory, Soaring Magazine, page 68, Soaring Society of America November 1983. USPS 499-920
  2. 1 2 3 Federal Aviation Administration (July 2011). "Make / Model Inquiry Results N60Z". Retrieved 8 July 2011.
This article is issued from Wikipedia - version of the Tuesday, June 23, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.