.338 Lapua Magnum

.338 Lapua Magnum

.338 Lapua Magnum cartridge next to a .338 Norma Magnum
Type Rifle
Place of origin Finland
Service history
Used by Multiple official and civil users
Wars Afghanistan War
Iraq War
Production history
Designer Nammo Lapua Oy
Designed 1989
Produced 1989–present
Specifications
Parent case .416 Rigby, .338/416
Case type Rimless, bottleneck
Bullet diameter 8.58 mm (0.338 in)
Neck diameter 9.46 mm (0.372 in)
Shoulder diameter 13.82 mm (0.544 in)
Base diameter 14.91 mm (0.587 in)
Rim diameter 14.93 mm (0.588 in)
Rim thickness 1.52 mm (0.060 in)
Case length 69.20 mm (2.724 in)
Overall length 93.50 mm (3.681 in)
Case capacity 7.40 cm3 (114.2 gr H2O)
Rifling twist 254 mm (1-10")
Primer type Large rifle magnum
Maximum pressure 420.00 MPa (60,916 psi)
Ballistic performance
Bullet weight/type Velocity Energy
12.96 g (200 gr) SP 1,005 m/s (3,300 ft/s) 6,734 J (4,967 ft·lbf)
16.20 g (250 gr) Partition 897 m/s (2,940 ft/s) 6,516 J (4,806 ft·lbf)
16.20 g (250 gr) Lapua Scenar GB488 VLD 910 m/s (3,000 ft/s) 6,634 J (4,893 ft·lbf)
19.44 g (300 gr) Sierra HPBT MatchKing 826 m/s (2,710 ft/s) 6,632 J (4,892 ft·lbf)
19.44 g (300 gr) Lapua Scenar GB528 VLD 837 m/s (2,750 ft/s) 6,810 J (5,020 ft·lbf)
Test barrel length: 700 mm (27.5 inches)
Source(s): Vihta Vuori Powder Lapua (700 mm; 27.5 inches) barrel[1][2][3]

The .338 Lapua Magnum (8.6×70mm or 8.58×70mm) is a rimless, bottlenecked, centerfire cartridge developed for military long-range sniper rifles. The Afghanistan War and Iraq War made it a combat-proven round with ready and substantial ammunition availability. The .338 Lapua is a dual-purpose, anti-personnel and anti-materiel round, but its anti-materiel potential is limited, due to the bullet's lower kinetic energy compared with that of the .50 BMG's 35.64-to-55.08-gram (550.0 to 850.0 gr) projectiles. The loaded cartridge is 14.93 mm (0.588 in) in diameter (rim) and 93.5 mm (3.68 in) long. It can penetrate better-than-standard military body armour at ranges up to 1,000 metres (1,090 yd) and has a maximum effective range of about 1,750 metres (1,910 yd). Muzzle velocity is dependent on load and powder temperature, and varies from 880 to 915 m/s (2,890 to 3,000 ft/s) for commercial loads with 16.2-gram (250 gr) bullets, which corresponds to about 6,525 J (4,813 ft·lbf) of muzzle energy.

British military issue overpressure .338 Lapua Magnum cartridges with a 91.4 mm (3.60 in) overall length, loaded with 16.2-gram (250 gr) LockBase B408 very-low-drag bullets fired at 936 m/s (3,071 ft/s) muzzle velocity from a L115A3 Long Range Rifle were used in November 2009 by British sniper Corporal of Horse (CoH) Craig Harrison to establish a new record for the longest confirmed sniper kill in combat, at a range of 2,475 m (2,707 yd).[4][5]

In addition to its military role, it is increasingly used by hunters and civilian long-range shooting enthusiasts. The .338 Lapua Magnum is capable of taking down any game animal, though its suitability for some dangerous game (Cape buffalo, hippopotamus, white rhinoceros, and elephant) is arguable, unless accompanied by a larger "backup" caliber: "There is a huge difference between calibers that will kill an elephant and those that can be relied upon to stop one."[6] In Namibia the .338 Lapua Magnum is legal for hunting Africa's Big five game if the loads have ≥ 5,400 J (3,983 ft·lbf) muzzle energy.[7]

History

Initial development

In 1983, Research Armament Industries (RAI) in the United States began development of a new, long-range sniper cartridge capable of firing a 16.2-gram (250 gr), 0.338-inch (8.6 mm) diameter bullet at 914 metres per second (3,000 ft/s) that could penetrate five layers of military body armour at 1,000 m (1,094 yd) and still make the kill. After preliminary experiments, a .416 Rigby case necked down to take a 0.338-inch (8.6 mm) bullet was selected, since this diameter presents an optimum of sectional density and penetrating capability for practical spin stabilized rifle bullets (bullets up to about 5 to 5.5 calibers in length).[8] The .416 Rigby is an English big game cartridge that was designed to accommodate 325 MPa (47,137 psi) pressures. One of the disadvantages of these old cartridge cases, which were intended for firing cordite charges instead of modern smokeless powder, is the thickness of the sidewall just forward of the web. During ignition, the cartridge's base, forward to the bolt face, is not supported. The case is driven back against the bolt face which results in the stretching of the case, particularly the sidewall immediately forward of the web. When the sidewall resists the outward expansion against the chamber, the pressure stretches the case thereby increasing its length resulting in the sidewall becoming thinner at that stretch point.

During the process RAI employed Brass Extrusion Labs Ltd. (BELL) of Bensenville, Illinois, to make the .338/416 or 8.58×71mm cartridge cases, Hornady produced bullets, and RAI built a sniper rifle under contract for the U.S. Navy. RAI found that the BELL cases did not fulfill the requirements. Pressed by military deadlines RAI looked for another case producer and contacted Lapua of Finland in 1984.[9] RAI was forced to drop out of the program due to financial difficulties. Subsequently, Lapua of Finland put this cartridge into limited production.[10] The .338/416 rifle program was later canceled when the contractors were unable to make the cartridge meet the project's velocity target of 914 m/s (3,000 ft/s) for a 16.2 g (250 gr) bullet, due to weak brass cases.

Final development

The current .338 Lapua Magnum cartridge was developed as a joint venture between the Finnish rifle manufacturer SAKO and the British rifle manufacturer Accuracy International along with the Finnish ammunition manufacturer Lapua, or more officially Nammo Lapua Oy, which since 1998 is part of the Nordic Ammunition Group (Nammo).[11][12]

Lapua opted to redesign the .338/416 cartridge. In the new case design, particular attention was directed toward thickening and metallurgically strengthening the case's web and sidewall immediately forward of the web. In modern solid head cases, the hardness of the brass is the major factor that determines a case's pressure limit before undergoing plastic deformation. Lapua tackled this problem by creating a hardness distribution ranging from the head and web (hard) to the mouth (soft) as well as a strengthened (thicker) case web and sidewall immediately forward of the web. This resulted in a very pressure resistant case, allowing it to operate at high pressure and come within 15 m/s (50 ft/s) of the original velocity goal. Lapua also designed a 16.2-gram (250 gr) .338 calibre Lock Base B408 full metal jacket bullet, modeled after its .30 calibre Lock Base bullet configuration. The result was the .338 Lapua Magnum cartridge which was registered with C.I.P. (Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives) in 1989. With the procurement by the Dutch Army, the cartridge became NATO codified.

The .338 Lapua Magnum fills the gap between weapons chambered for standard military rounds such as the 7.62×51mm NATO and large, weighty rifles firing the .50 BMG cartridge.[13] It also offers a tolerable amount of barrel wear, which is important to military snipers who tend to fire thousands of rounds in practice every year to acquire and maintain expert long-range marksmanship.[notes 1] Like every other comparable big magnum rifle cartridge the .338 Lapua Magnum presents a stout recoil.[14] An appropriate fitting stock and an effective muzzle brake will help to reduce recoil induced problems, enabling the operator to fire more rounds before getting too uncomfortable to shoot accurately. Good factory loads, multiple projectile weights and factory special application ammunition are all available.[notes 2][15]

Due to its growing civilian popularity, several high quality tactical and match (semi) custom bolt actions designed for the .338 Lapua Magnum are becoming available. These (semi) custom bolt actions are used with other high grade rifle and sighting components to build custom sporting and target rifles.

Law enforcement and military users

A Royal Dutch Marine ejects a shell casing from his Accuracy International .338 Lapua Magnum sniper rifle
IDF Barak 338 - a militarized H-S Precision Pro Series 2000 HTR in .338 Lapua Magnum caliber

The .338 Lapua Magnum cartridge is in law enforcement or military[16][17] use with:

The .338 Lapua Magnum has been designated a "cartridge of interest" by the National Defense Industrial Association (NDIA). It is being groomed to replace the .300 Winchester Magnum and the .50 BMG for anti-personnel long-range service in the U.S. military. On June 17, 2008, the U.S. government issued a market survey to support a requirement for a Precision Sniper Rifle (PRS) to possibly replace the currently fielded Bolt Action SOF Sniper Systems MK 13 (.300 Winchester Magnum) and the M40 and M24 (7.62×51mm NATO) chambered to safely fire factory produced "non-wildcat" .338 caliber ammunition.[56][57] On 7 March 2013, the Remington MSR was declared the winner of the Precision Sniper Rifle competition. Remington announced that the MSR had won on March 8, and it was publicly confirmed on March 9. This was followed by a $79.7 million contract for 5,150 rifles with suppressors, along with 4,696,800 rounds of ammunition to be supplied over the next ten years.[58][59] The contract was awarded on 12 September 2013. Remington Defense produces the sniper rifles and utilizes two other companies for other system components, with Barnes Bullets for ammunition and Advanced Armament Corporation for muzzle brakes and suppressors; all three companies are subsidiaries of Freedom Group Incorporated.[60]

Cartridge dimensions

Extremely thick-walled brass results in a 7.40 ml (114 grains H2O) cartridge case capacity for the .338 Lapua Magnum. The exterior shape of the case was designed to promote reliable feeding and extraction in bolt action, semi-automatic, and automatic firearms alike, under extreme conditions.

.338 Lapua Magnum maximum C.I.P. cartridge dimensions. All sizes in millimeters (mm).

Americans would define the shoulder angle at alpha/2 ≈ 20 degrees. The common rifling twist rate for this cartridge is 254 mm (1 in 10 in), 6 grooves, Ø lands = 8.38 mm, Ø grooves = 8.58 mm, land width = 2.79 mm and the primer type is large rifle magnum.

According to the official C.I.P. (Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives) decisions and tables edition 2007 the .338 Lapua Magnum case can handle up to 420.00 MPa (60,916 psi) Pmax piezo pressure. This now prevails over the C.I.P. decisions and tables edition 2003, that rated the .338 Lapua Magnum at 470.00 MPa (68,168 psi) Pmax maximum piezo pressure.[61] The 470.00 MPa (68,168 psi) Pmax maximum piezo pressure C.I.P. ruling for the .300 Lapua Magnum cartridge, which is based on the same case, was not accordingly changed. In C.I.P. regulated countries every rifle cartridge combo has to be proofed at 125% of the prevailing maximum C.I.P. pressure to certify for sale to consumers. This means that .338 Lapua Magnum chambered arms in C.I.P. regulated countries are currently (2013) proof tested at 525.00 MPa (76,145 psi) PE piezo pressure.

Lapua is ambivalent on the maximum piezo pressure of this cartridge. In the article 'From an American dream to a Finnish success story'[62] by Janne Pohjoispää Lapua propagates the C.I.P. 2007 ruling of 420.00 MPa (60,916 psi) maximum piezo pressure. To further complicate matters the mentioned 56,000 CUP C.I.P. copper crusher pressure in this article would translate in ≈ 447.50 MPa (64,904 psi) C.I.P. piezo pressure according to a study on the conversion from CUP to PSI for rifle cartridges by Denton Bramwell.[63] The C.I.P. 2003 ruling of 470.00 MPa (68,168 psi) piezo pressure is corroborated by Lapua Australia in the 'History and development of the .338 Lapua Magnum' article by Alan C. Paulson.[64] A reverse engineering simulation with QuickLOAD internal ballistic software predicted that Lapua load their factory .338 Lapua Magnum ammunition at ≈ 420.00 MPa (60,916 psi) piezo pressure as Alan C. Paulson asserts in his article.

The large boltface combined with the high maximum pressure means that the .338 Lapua Magnum should only be chambered in rifles that are capable of handling such large and fierce cartridges and thus high bolt thrust safely. Chambering such powerful super magnum cartridges in rifles intended for normal magnum rifle cartridges and using high pressure loads can cause serious or fatal injury to the shooter and bystanders.

The American .338-378 Weatherby Magnum cartridge introduced in 1998 and the American .338 Remington Ultra Magnum (.338 RUM) cartridge introduced in 2000 are probably the closest currently (2007) commercially available ballistic twins of the .338 Lapua Magnum. The .338-378 Weatherby Magnum is however a belted cartridge and the .338 Remington Ultra Magnum is a rebated rim cartridge.

Supersonic range performance of the .338 Lapua Magnum

Performance with C.I.P. conform cartridges

For a typical .338 Lapua Magnum high end factory military sniper rifle like the Sako TRG-42 with a 690 mm (27.2 in) long 305 mm (1 in 12 inch) rifling twist rate barrel at sea level, 1,500 m (1,640 yd) is considered to be the maximum shooting distance for man sized targets. When using standard Lapua military 16.2 g (250 gr) loads it has a supersonic range of 1,500 m (1,640 yd) under warm summer conditions at a muzzle velocity of 915 m/s (3,000 ft/s). However, to be able to maintain 80 to 90% hit probability on non-moving 45 cm × 90 cm (17.7 in × 35.4 in) reactive army targets, this maximum shooting distance has to be reduced to 1,300 metres (1,422 yd) at freezing point conditions or 1,100 m (1,203 yd) in Arctic winter conditions, when the muzzle velocity may drop to 880 m/s (2,887 ft/s)—i.e. only during optimal warm summer conditions the 1,500 m (1,640 yd) maximum shooting distance is realistically achievable.[65][66]

Loaded with more aerodynamic very-low-drag bullets such as the traditionally lead cored 19.44 g (300.0 gr) Lapua Scenar GB528 VLD bullet (G1 BC = 0.736) or the Lost River Ballistics J40 .338 17.5 gram (270 gr) CNC manufactured mono-metal bullet (G1 BC = 0.871) the long-range performance and supersonic range of .338 Lapua Magnum rifles can be improved. These longer very-low-drag bullets require a 254 mm (1 in 10 inch) twist rate to stabilize them. Due to the lower practically possible muzzle velocities for a relative heavy bullet like the 19.44 g (300 gr) Lapua Scenar GB528 VLD bullet it gains about 104 m (114 yd) extra supersonic range under International Standard Atmosphere sea level conditions (air density ρ = 1.225 kg/m3) at a muzzle velocity of 837 m/s (2750 ft/s) when compared to the standard 16.2 g (250 gr) Lapua Scenar GB488 VLD at a muzzle velocity of 915 m/s (3002 ft/s). For significant supersonic range improvement the aerodynamic efficiency of the employed bullets has to be significantly improved without sacrificing a lot of practically achievable muzzle velocity - meaning that besides the coefficient of drag of the projectile weight is also an important parameter for its actual downrange flight behavior. The .338 17.5 gram (270 gr) Lost River Ballistic Technologies J40 match bullet made out of a copper-nickel alloy is one of the most aerodynamic .338 calibre bullets available. It has an 1,800 m (1,970 yd) supersonic range under optimal warm summer conditions at a muzzle velocity of 869 m/s (2,850 ft/s). This makes engaging static targets up to 1,800 m (1,970 yd) feasible.

Performance improvement experiments with non-C.I.P.-conforming cartridges

Improvement beyond this standard while still using standard .338 Lapua Magnum brass is possible, but the bullets have to be very long (over 5.5 calibers in length) and the normal cartridge overall length of 93.5 mm has to be exceeded making such cartridges wildcats. The common 254 mm (1:10 inch) rifling twist rate also has to be tightened to stabilize very long projectiles. Such commercially non-existent cartridges are termed "wildcats". The use of a wildcat .338 Lapua Magnum based cartridge demands the use of a custom or customized rifle with an appropriately cut chamber and fast-twist bore. The firearm action and if a repeating arm is required the magazine(s) must also be able to cope with dimensional increases.

An example of such a special .338 calibre extreme range bullet is the German CNC manufactured mono-metal 18.92 gram (292 gr) LM-105 (Cd = 0.2487 at Mach 2.216 – this drag coefficient and the corresponding G1, G7 and G8 ballistic coefficients are established by Doppler radar measurements).[67] The LM-105 has a supersonic range of ≈ 1,860 metres (2,030 yd) at a muzzle velocity of 915 metres per second (3,002 ft/s) under International Standard Atmosphere sea level conditions (air density ρ = 1.225 kg/m3). The 2010 version of the LM-105 bullet has an overall length of 54.3 millimetres (2.14 in) or 6.33 calibers and derives its exceptional low drag from a radical LD Haack or Sears-Haack profile in the bullet's nose area. Rifles chambered for this wildcat cartridge, with a cartridge overall length of 105 millimetres (4.1 in), and equipped with custom made 178 mm (1:7 inch) progressive twist rate[68] 900 millimetres (35.4 in) long barrels with a 2° cone-angle (the standard C.I.P. cone-angle for the .338 Lapua Magnum is 6°) cone area finished first and second at several long range competitions. Its most recent win (2007) was in an international Special Forces and police sniper competition in Switzerland against rifles chambered for 7.62×51mm NATO up to .50 BMG at ranges from 100 m – 1,500 m (109 yd – 1,640 yd). The LM-105 bullet exhibited its very low wind drift susceptibility notably at ranges beyond 800 metres (870 yd).[67] A real world average G1 BC of ≈ 0.83 or a G7 BC of ≈ 0.42 is commonly adopted by the users of this bullet, for making long range trajectory predictions using ballistics calculators.[67] In contrast the LM-105 designer Lutz Möller originally calculated an optimistic G1 BC of ≈ 0.93 and a supersonic range of ≈ 2,000 metres (2,190 yd) at a muzzle velocity of 915 metres per second (3,002 ft/s) under International Standard Atmosphere sea level conditions (air density ρ = 1.225 kg/m3).

The .343 Lapua Magnum LM-107 was a wildcat cartridge under development based on the standard .338 Lapua Magnum cartridge case.[69] The LM-107 was hoped to boost the ballistic performance of the LM-105 by achieving an increase in supersonic range. The 19.3 g (298 gr) LM-107 projectile design is 59 millimetres (2.3 in) long and has a Haack profiled nose and an Adams profiled tail. The rifling twist rate for the .343 Lapua Magnum LM-107 wildcat cartridge was chosen at 180 mm (1:7 inch), Ø lands = 8.72 mm, Ø grooves = 8.45 mm and loaded with the LM-107 projectile has a cartridge overall length of 107 millimetres (4.2 in). The length of the neck is increased from 8,31 to 8,50 mm to support the bigger LM-107 bullet. Several other dimensions of the .338 Lapua Magnum parental cartridge are also changed. The shoulder angle gets steepened from 40° to 60° and the body taper is set at 1°. The throat area is set at a 2° cone-angle. All this modifications make the .343 Lapua Magnum a fairly comprehensively revised wildcat cartridge. Out of a 900 millimetres (35.4 in) long progressive twist barrel Mr. Möller expected to achieve 909 metres per second (2,982 ft/s) muzzle velocity. If Möller's design assumptions are correct the LM-107 projectile with a calculated G1 BC of 1.02 will offer a supersonic range of ≈ 2,170 metres (2,370 yd) at a muzzle velocity of 909 metres per second (2,982 ft/s) under International Standard Atmosphere sea level conditions (air density ρ = 1.225 kg/m3).

.338 Lapua Magnum as a parent case

The .300 Lapua Magnum

The commercially successful .338 Lapua Magnum cartridge has functioned as the parent case for the .300 Lapua Magnum, which is essentially a necked-down version of the .338 Lapua Magnum. The .338 cartridge case was used for this since it has the capability to operate with high chamber pressures which, combined with smaller and hence lighter bullets result in very high muzzle velocities.

The Finnish ammunition manufacturer Lapua got the .300 Lapua Magnum C.I.P. certified, so it became an officially registered and sanctioned member of the Finnish "family" of super magnum rifle cartridges. The .300 Lapua Magnum is not commercially available and currently exists only as a C.I.P. datasheet. It is however still used by a few shooters who produce the cases from .338 Lapua Magnum brass by reshaping the shoulder and neck, and handloading it with .30 calibre bullets.

The .300 Lapua Magnum has a 7.33 ml (113 grains H2O) cartridge case capacity.

.300 Lapua Magnum maximum C.I.P. cartridge dimensions. All sizes in millimeters (mm).

Americans would define the shoulder angle at alpha/2 ≈ 25 degrees. The common rifling twist rate for this cartridge is 240 mm (1 in 9.45 in), 4 grooves, Ø lands = 7.62 mm, Ø grooves = 7.82 mm, land width = 4.47 mm and the primer type is large rifle magnum.

According to the official C.I.P. (Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives) rulings the .300 Lapua Magnum can handle up to 440.00 MPa (63,817 psi) Pmax piezo pressure. This now prevails over the C.I.P. decisions and tables edition 2007, that rated the .300 Lapua Magnum at 470.00 MPa (68,168 psi) Pmax piezo pressure. In C.I.P. regulated countries every rifle cartridge combo has to be proofed at 125% of this maximum C.I.P. pressure to certify for sale to consumers.[70] This means that .300 Lapua Magnum chambered arms in C.I.P. regulated countries are currently (2013) proof tested at 550.00 MPa (79,771 psi) PE piezo pressure.

This for rifles very high maximum allowed chamber pressure level indicates that the cases of the .300 and .338 Lapua Magnum are built extremely sturdy to cope with this for rifles very high operating pressure. The large boltface combined with the high 470 MPa (68,000 PSI) maximum pressure makes that the .300 Lapua Magnum should only be chambered in rifles that are capable of handling such large and fierce cartridges and thus high bolt thrust safely. Chambering such powerful super magnum cartridges in rifles intended for normal magnum rifle cartridges and using 470 MPa (68,000 PSI) loads can cause serious or fatal injury to the shooter and bystanders.

The 7.62 UKM

The .338 Lapua Magnum cartridge is also used as the parent case for the German designed 7.62 UKM, which is essentially a necked-down shortened version of the .338 Lapua Magnum.[71] The use of the .338 cartridge case with its capability to operate at high chamber pressures resulted in magnum case capable of producing high muzzle velocities.

The 7.62 UKM was developed by Michael Uekötter and was C.I.P.-certified in 2002, making it an officially registered and sanctioned member of the Finnish "family" of super magnum rifle cartridges. The 7.62 UKM is not commercially available and currently exists only as a C.I.P. datasheet. It is however still used by a few shooters who produce the cases from .338 Lapua Magnum brass by reshaping the shoulder and neck, and handloading it with .30 calibre bullets.

The 7.62 UKM has a 5.84 ml (90 grains H2O) cartridge case capacity.

7.62 UKM maximum C.I.P. cartridge dimensions. All sizes in millimeters (mm).

Americans would define the shoulder angle at alpha/2 ≈ 20 degrees. The common rifling twist rate for this cartridge is 254 mm (1 in 10 in), 6 grooves, Ø lands = 7.62 mm, Ø grooves = 7.82 mm, land width = 2.79 mm and the primer type is large rifle magnum.

According to the official C.I.P. (Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives) rulings the 7.62 UKM Magnum can handle up to 440.00 MPa (63,817 psi) Pmax piezo pressure. This now prevails over the C.I.P. decisions and tables edition 2007, that rated the 7.62 UKM at 470.00 MPa (68,168 psi) Pmax piezo pressure. In C.I.P. regulated countries every rifle cartridge combo has to be proofed at 125% of this maximum C.I.P. pressure to certify for sale to consumers.[72] This means that 7.62 UKM chambered arms in C.I.P. regulated countries are currently (2013) proof tested at 550.00 MPa (79,771 psi) PE piezo pressure.

Wildcats

From left to right: cross sectioned and normal .338 Yogi cartridge cases compared to a factory .338 Lapua Magnum case.

The .338 Lapua Magnum case is also used as the parent case for a host of modified variants that are not officially registered with or sanctioned by C.I.P. or its American equivalent, SAAMI. Such cartridges which use commercial factory cases are generally known as wildcats. By changing the shape of standard factory cases (decreasing case taper and/or changing the shoulder geometry) the wildcatter generally increases the case capacity of the factory parent cartridge case, allowing more propellant to be used to generate higher velocities. Besides changing the shape and internal volume of the parent cartridge case, wildcatters also can change the original calibre. A reason to change the original calibre can be to comply with a minimal permitted calibre or bullet weight for the legal hunting of certain species of game. Because the .338 Lapua offers a large and exceptionally sturdy, pressure resistant cartridge case that can be relatively easily reloaded and hence be reused several times it has become quite popular amongst wildcatters. With the .338 Lapua Magnum as the parent case wildcatters have created 7 mm (7 mm Allen Magnum, 7 mm Katzmeier, 7 mm Fatso[73]), .30 (.30-338 Lapua (Triebel), .30 Wolf, 300 Allen Express), 8 mm (8 mm-338 Lapua (Triebel), LM-101), .338 (.338 Yogi, LM-105), .343 (.343 Lapua Magnum LM-107[69]), 9.3 mm (9,3-338 Lapua Magnum (Triebel)), .375 (9.5×70 ELR) and .50 calibre (.510 Whisper) variants. The current (2008) benchrest 1,000-yard (914.4 m) 5-shot group world record holder Tom Sarver used a .300 Hulk wildcat cartridge, which is basically a necked-down, blown out, shortened .338 Lapua Magnum variant, to achieve a 1.403-inch (35.64 mm) diameter 5-shot group on 7 July 2007.[74]

See also

Notes

  1. ↑ The Finnish Army found out during a test/trails program and 7 years of service that the barrels of their Sako TRG-42 sniper rifles lasted 7,000 to 8,000 rounds with Lapua Lock Base B408 factory ammunition before showing impermissible accuracy decay. The Finnish Army consistent accuracy requirement for these rifles is ≤ 1 MOA at 1,000 m. If this requirement is not met the TRG-42 gets a new barrel. This is normal practice for active high performance precision rifle operators who regard barrels as expendable items. The continuous use of very powerful handloads (which results in higher muzzle velocities) resulted in much quicker throat erosion reducing the TRG-42 barrel's accuracy life to 1500 to 2000 rounds.
  2. ↑ In 1990, the US military Adjutant General's Office issued a legal opinion holding that the Sierra MatchKing bullet (and similar bullets of other manufacturers), despite being a hollow point design, is not designed specifically to cause greater damage or suffering in a human target, and in fact normally does not create a wound readily distinguishable from wounds caused by conventional full metal jacket bullets, and is therefore in their opinion legal under the Hague Convention for use in war.

References

  1. ↑ Lapua product brochure .338 Lapua Magnum ammunition.
  2. ↑ VihtaVuori international reloading guide 2011.
  3. ↑ .338 Lapua Mag. (8.6x70)
  4. ↑ Sheridan, Michael (May 3, 2010). British sniper Craig Harrison (The Silent Assassin) breaks record, kills target from 1.5 miles away". Daily News (New York). Accessed May 13, 2010.
  5. ↑ Alpert, Lukas I. (May 2, 2010). "Sniper kills Qaeda-from 1½ mi. away". New York Post. Accessed May 13, 2010.
  6. ↑ Robertson, K: The Perfect Shot, Safari Press, Inc, Long Beach, 1999:p. 50.
  7. ↑ "NAPHA - Namibia Professional Hunting Assiation: Hunting Laws& Rifle Importation". napha-namibia.com. Retrieved 5 July 2015.
  8. ↑ What is the Maximum Length of a spin stabilized Projectile? by Mr. Beat Kneubühl.
  9. ↑ Lapua Oy company website.
  10. ↑ Barnes, Frank C., Cartridges of the World 8th Edition, Edited by M.L. McPherson, DBI Books, 1997, ISBN 0-87349-178-5.
  11. ↑ "From an American dream to a Finnish success story". Archived from the original on 2009-05-18. Retrieved 2009-05-16.
  12. ↑ History of Lapua
  13. ↑ Cartridges for Long-Range Sniping Rifles by Anthony G Williams
  14. ↑ Recoil indications at Accurate Reloading
  15. ↑ Sniper Use of Open-Tip Ammunition.
  16. ↑ worldrifles.com.
  17. ↑ World Small Arms Inventory.
  18. ↑ Sako TRG-42 The quest for cold-bore accuracy stops here. By Eric R. Poole, Posted: 2010-04 Archived July 11, 2011, at the Wayback Machine.
  19. ↑ Australian Government Contract Notice View - CN68887 BLASER SNIPER RIFLES.
  20. ↑ Australian Government Contract Notice View - CN152254 .338 BLASER ITEMS - VARIOUS.
  21. ↑ "Blaser". Official website: Equipment and clothing. Australian Army. Retrieved 13 June 2012.
  22. ↑ "PGW Timberwolf". snipershide.com. Retrieved 2009-07-17.
  23. ↑ INDUMIL - Industria Militar
  24. 1 2 3 4 O'Dwyer, Gerard (February 25, 2008). "Finland's Sako Targets Nordic Rifle Sales". Defense News. Retrieved July 31, 2010.
  25. ↑ worldrifles.com
  26. ↑
  27. ↑ Estonia to buy sniper rifles from Finland
  28. ↑ http://delta.gov.ge/product/338-g-b-m/
  29. ↑ Modern Firearms - ERMA SR-100
  30. ↑ "Kopassus & Kopaska - Specijalne Postrojbe Republike Indonezije". Hrvatski vojnik (in Croatian). Retrieved 2010-06-12.
  31. ↑ "IDF Sniper Weapon System (SWS) .338 Lapua Magnum Bolt-Action Sniper Rifle". Archived from the original on 2009-05-18. Retrieved 2009-05-16.
  32. ↑ H-S Precision Pro-Series 2000 HTR (Heavy Tactical Rifle).
  33. ↑ Protecting the Holy Land by Charles Karwan
  34. ↑ Israel's Special Forces Guid - iSayeret: http://www.isayeret.com
  35. ↑ Sako TRG-42 - colmoschin.it
  36. ↑ "PGK Malaysian Special Police Force Weapons". Military Factory. March 7, 2016. Retrieved 2016-03-11.
  37. ↑ "Special Forces - Wapens" (in Dutch). Netherlands Legermuseum: Collectie Informatie Centrum. Retrieved 2009-10-17.
  38. ↑ "Accuracy, antipersoneel snipergeweer .338" (in Dutch). Netherlands Ministry of Defence. Archived from the original on December 16, 2011. Retrieved 2010-02-24.
  39. ↑ Nowe gromy GROM
  40. ↑ Snipers foto
  41. ↑ http://cripo.com.ua/?sect_id=3&aid=90616(Russian)
  42. ↑ http://slavs.org.ua/sorevnovanie-sniperov(Russian)
  43. ↑ Waffen HQ Russian Infantry weapons.
  44. ↑ "Singapurske specijalne postrojbe". Hrvatski vojnik (in Croatian) (212). October 2008. Retrieved 2009-10-25.
  45. ↑ 8.6 mm Mini Hecate Sniper Rifle
  46. ↑ "Web Del Grupo Especial De Operaciones (GEO)" (in Spanish). www.policia.es - Official Website of the Spanish National Police Corps. Retrieved 2009-06-26.
  47. ↑ Finnish Government
  48. ↑ Swiss Army Infantriebrigade 7 - Wettkampf der Scharfschützen (German)
  49. ↑ YLE Uutiset 6.12.2007
  50. ↑ L115A3 Long Range Rifle. British Army. Archived January 6, 2013, at the Wayback Machine.
  51. ↑ Custom Tactical Rifle, McMillan Tactical Rifle - TAC-338, .338 Lapua
  52. ↑ Buiso, Gray (January 1, 2012). "Meet the big shot - SEAL is America’s deadliest sniper". New York Post. Retrieved 2012-01-03.
  53. ↑ Zennie, Michael (2 January 2012). "255 confirmed kills: Meet Navy SEAL Chris Kyle... the deadliest sniper in US history". London: Daily Mail. Retrieved 2012-01-02.
  54. ↑ Sanchez, Raf (2 January 2012). "'The Devil of Rahmadi' named America's deadliest sniper". London: The Daily Telegraph. Retrieved 2012-01-02.
  55. ↑ "McMillan TAC-338 Sniper Rifle". Retrieved February 16, 2013.
  56. ↑ US Special Operations Considers A ".338" Sniper Rifle.
  57. ↑ Precision Sniper Rifle - Solicitation Number: H92222-09-PSR.
  58. ↑ Curtis, Rob (7 March 2013). "SOCOM PSR contract awarded to Remington Defense MSR". Gearscout blog. Military Times. Retrieved 9 March 2013.
  59. ↑ It’s Official: SOCOM PSR Contract awarded to Remington Defense - Militarytimes.com/Gearscout, 8 March 2013
  60. ↑ Remington Defense Announces Multi-Million Dollar Precision Sniper Rifle Contract with U.S. Special Operations Command - Remington press release, 12 September 2013 Archived October 31, 2013, at the Wayback Machine.
  61. ↑ C.I.P. TDCC sheet 338 Lapua Mag.
  62. ↑ From an American dream to a Finnish success story. Archived December 4, 2010, at the Wayback Machine.
  63. ↑ Correlating PSI and CUP, a study done that shows a high correlation between CUP and PSI for rifle cartridges by Denton Bramwell.
  64. ↑ History and development of the .338 Lapua Magnum.
  65. ↑ Weapon Employment Zone (WEZ) Analysis of the Optimized 300 Winchester Magnum vs 338 Lapua Magnum With Various Ammunition Types by Bryan Litz, Applied Ballistics LLC
  66. ↑ Probabalistic Weapon Employment Zone (WEZ) Analysis A Conceptual Overview by Bryan Litz
  67. 1 2 3 "LM-105". Archived from the original on February 9, 2014.
  68. ↑ Progressive twist rate barrels.
  69. 1 2 LM-107 .343 Lapua Magnum Archived April 2, 2009, at the Wayback Machine.
  70. ↑ C.I.P. TDCC sheet 300 Lapua Mag.
  71. ↑ The 7.62 UKM. A German 300 Magnum Wildcat Extraordinary.
  72. ↑ C.I.P. TDCC sheet 7,62 UKM
  73. ↑ The 7mm Fatso - The Ultimate Short Magnum! by Greg Duley.
  74. ↑ Sarver Shoots 1.403″ Group at 1000 Yards.

External links

Wikimedia Commons has media related to .338 Lapua Magnum.
This article is issued from Wikipedia - version of the Monday, May 02, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.