Abbey Pumping Station

Abbey Pumping Station

Red-brick industrial building with tall chimney-stack

Abbey Pumping Station, Leicester Museum of Science and Technology
Location of the Museum in Leicester
Established 1972 (1972)
Location Leicester, United Kingdom
Coordinates 52°39′18″N 1°07′50″W / 52.655°N 1.130556°W / 52.655; -1.130556
Type Science and Technology Museum
Key holdings Steam engines, 'interactive toilets', steam shovel, buses
Website abbey-pumping-station

The Abbey Pumping Station is a museum of science and technology in Leicester, England, on Corporation Road, next to the National Space Centre. With four working steam-powered beam engines from its time as a sewage pumping station, it also houses exhibits for transport, public health, light and optics, toys and civil engineering.

Sewage pumping station

The building was constructed in 1891 by Leicester Corporation on the north side of Leicester, alongside the River Soar, as a pumping station used to pump the town's sewage to Beaumont Leys.[1] The grand Victorian building, designed by Stockdale Harrison (Leicester architect) in 1890, houses four Arthur Woolf compound beam engines built by Gimson and Company of Leicester. The first attempt to respond to the population's sewage disposal was in 1850 when piped water made water closets possible, and Thomas Wicksteed designed and built sewers leading to a sedimentation and de-oderisation treatment works on the northern, downstream, edge of the town. Limited capacity and high costs meant that a Pail closet system continued to be used for poorer neighbourhoods.[2] As the town expanded so did the problems of pollution in the River Soar from the treatment works. Disposal of the Night soil from the pail closets, via railway wagons and canal barges, caused complaints of smell and pollution.[2] A new solution was needed and the answer was to pump everything to a Sewage farm on higher ground at Beaumont Leys. It continued pumping Leicester's sewage until 1964, when electric pumps took over, and within a few years the Wanlip Sewage Treatment plant took over and the pumping station was no longer needed.[3]

Museum

In 1972 the building re-opened as a museum of science and technology, run by Leicestershire Museums.[4] The huge beam engines were retained intact, and were gradually restored to full working order. It is one of a number of historic pumping stations which have been preserved. Leicester City Council became a unitary authority in 1997 and the Abbey Pumping Station is one of the museums that is within their jurisdiction.[4]

Displays

The steam engines (see below) which drive the sewage pumps can be seen. In addition, there is combination of informative educational displays (mainly about water and sewage), an old-fashioned film theatre, and collections of artifacts and pictures ranging from domestic appliances to trams. An eclectic collection of larger items of industrial archeology is in the grounds. This includes a narrow gauge railway and some transport items.

Beam engines

Cylinder heads in late 2011

The four steam engines were built in Leicester by Gimson and Company and today are rare examples of Woolf compound rotative beam engines. At the time these engines were built they were considered an old-fashioned but very well-established design. The engines are large examples. The cylinders are 30 inches (76 cm) x 69.5 inches (177 cm) and 48 inches (120 cm) x 102 inches (260 cm). The cast-iron flywheels are 21 feet (6.4 m) diameter and the beams are of plain steel plate construction and 28 feet (8.5 m) long. The engines are of 200 indicated horsepower each.[5]

These engines are rated at 200 hp, at 12–19 rpm, of which they pumped 208,000 imperial gallons of sewage an hour (263 L/s).

All four engines have been restored back to working condition by a dedicated team of volunteers: the Leicester Museums Technology Association. It is the only engine house in the world where you can see four working examples of the same beam engine in one building.[4]

Current projects in the engine house are the ongoing maintenance of the latest restored engine, No.1 (restored over a period of 4 years by the volunteers).

Museum collections

The Pumping Station is normally open Daily from 11am - 4:30pm. Engines can be seen in steam at various steam days along with other steam and early internal combustion exhibits.

Transport collection

The Museum has a narrow gauge railway which is normally operated by Leonard, an 0-4-0ST 2 ft (610 mm) narrow gauge locomotive built by W.G. Bagnall, Stafford as works number 2087 in 1918, but four diesel locomotives – three Simplex and one Ruston – are also available if needed.

There is also a collection of vintage road vehicles which are operated on selected days. Exhibits include: fire engines, buses (see below), an 1894 Aveling and Porter steam roller, three diesel rollers, a Bedford fish and chips van and an Austin K2 brewery dray lorry with ales.

Buses

See also

References

  1. leicester.gov.uk abbey-pumping-station accessed 5 November 2015
  2. 1 2 VCH 'The City of Leicester: Social and administrative history since 1835', in A History of the County of Leicester: Volume 4, the City of Leicester, ed. R A McKinley (London, 1958), pp. 251-302 VCH/leics/vol4, accessed 2 November 2015
  3. abbeypumpingstation.com/exhibits websie of the Leicester Museums Technology Association, accessed 5 November 2015
  4. 1 2 3 Roger Caunt, 2011, Leicester Citizen, March 2011, Leicester Civic Society.
  5. Chris Allen, 2011, Beam Engines in the UK. www.geograph.org.uk 2#abbey-pumping-station-leicester, accessed 5 November 2015

External links

Wikimedia Commons has media related to Abbey Pumping Station.

Coordinates: 52°39′18″N 1°7′50″W / 52.65500°N 1.13056°W / 52.65500; -1.13056

This article is issued from Wikipedia - version of the Saturday, February 27, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.