Berg connector
| Type | Electrical | ||
|---|---|---|---|
| Production history | |||
| Designer | Berg Electronics Corporation | ||
| General specifications | |||
| Pins | 4 | ||
| Electrical | |||
| Signal | Yes | ||
| Pin out | |||
| Pin | Color | Type | |
| Pin 1 | Red | +5V | |
| Pin 2 | Black | Ground | |
| Pin 3 | Black | Ground | |
| Pin 4 | Yellow | +12V | |
A Berg connector is a brand of electrical connector used in computer hardware. Berg connectors are manufactured by Berg Electronics Corporation of St. Louis, Missouri, a division of Framatome Connectors International.
Berg connectors have a 2.54 mm (=.100 inch) pitch, pins are square (0.64 mm x 0.64 mm = approx. 0.025 x 0.025 inch), and usually come as single or double row connectors.
Many types of Berg connectors exist. Some of the more familiar ones used in IBM PC compatibles are:
- the 4-pin polarized Berg connectors used to connect 3.5-inch floppy disk drive units to the power supply unit, usually referred to as simply a "floppy power connector", but often also referred to as LP4.
- the 2-pin Berg connectors used to connect the front panel lights, turbo switch, and reset button to the motherboard, and
- the 2-pin Berg connectors used as jumpers for motherboard configuration.
See also
- Electrical connector
- DC connector
- Insulation-displacement connector (IDC)
- JST connector
- Molex connector
- Pin header connector
External links
This article is issued from Wikipedia - version of the Tuesday, September 22, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.