Bhagwant University

Bhagwant University
Type Private
Established 2008
Chairman Dr. Anil Singh[1]
Vice-Chancellor Prof Virendra Sharma[2]
Location Ajmer, Rajasthan, India
Website Official website

Bhagwant University is located in Ajmer, Rajasthan, India.[3] It is a co-educational private university in ajmer in the state of Rajasthan, India. It is a venture of Bhagwant Group of Institutions, Established in 1999. Bhagwant University is a privately funded State University established through an act of State Legislature of Rajasthan. It is registered with University Grants Commission under Section 2(f) of UGC Act 1956.

University Ajmer is established by Rajasthan State Legislative Act in 2008, and approved by UGC. The courses offered by the University are approved by Bar Council of India (BCI), National Council of Teacher’s Education (NCTE),[4] Pharmacy Council of India and it follows standards of All India Council of Technical Education (AICTE) for its technical programs.{{http://bhagwantuniversity.ac.in/wp-content/uploads/2015/08/approval_notice_to_institutions.pdf}} University is a member of Association of Indian Universities (AIU), Federation of Indian Chambers of Commerce and Industry (FICCI), Indian Association of Physiotherapists (AIP), All India Management Association (AIMA).Template:Bhagwantuniversity.ac.in/?page id=3803 The University is located in rural hinterland of Ajmer and is a boon for students who can not afford high cost technical education.[5]

Hon'ble Minister Kapil Sibbal giving Best Private University in Rajasthan Award to Dr Anil SIngh

The following programs [6] are conducted at Bhagwant University.

Courses

(A) Regular Programs:

Faculty of Engineering & Technology

• Ph.D ● M.Phil • M.Tech: Electronics & Communication, Computer Sciences, Information Technology, Electrical, Mechanical & Civil. • M.Tech (Part Time): Electronics & Communication, Computer Sciences, Information Technology, Electrical, Mechanical and Civil. • M.Tech (Integrated): Electronics & Communication, Computer Sciences, Information Technology, Mechanical & Civil. • B.Tech: Civil, Mechanical, Electrical, Electronics & Communication, Computer Science, Aeronautical, Agriculture, Biotechnology, Mining & Petroleum Engg. • Diploma in Engineering: Electronics & Communication, Computer Science, Mechanical, Civil, Electrical Engg, Mining, Petroleum.

Bhagwant University Chairman Dr Anil Singh signing MoU with Dr Halvor Hektoen, Dy-VC of Norwegian University of Life Sciences NMBU on 14th October 2014 while he visited as a Presidential delegate to Norway

Faculty of Pharmacy • Ph.D ● M.Phil. • M.Pharma: 1) Pharmaceutics 2) Pharmacology 3) Pharmaceutical Chemistry 4) Pharmacognacy 5) Quality Assurance 6) Pharmaceutical Management & Drug Regulatory Affairs. • B.Pharma, • D.Pharma

Faculty of Computer Applications

• Ph.D ● M.Phil ● MCA ●BCA ● M.Sc (IT) ● B.Sc (IT) ● PGDCA • M.Sc (Animation) ● B.Sc (Animation)

Faculty of Management

• Ph.D ● M.Phil ● MBA ●BBA ●PGDBM

Faculty of Media & Mass Communication

• Ph.D. ● M.Phil • MA (JMC) (Master of Arts in Journalism & Mass Communication) • BA (JMC) (Bachelor of Arts in Journalism & Mass Communication) • BFVT (Bachelor of Film & Video Technology)

Faculty of Medical Sciences ● MPT ● BPT ● BMLT New courses like BAMS, BSc Nursing etc are in pipe line.

Faculty of Education ● Ph.D ● M.Phil ●MA (Education) ●B.Ed.

Faculty of Hotel Management • Ph.D ● M.Phil • BHMCT (Bachelor of Hotel Management & Catering Technology) • B.Sc. in Hotel Management • B.Sc. (Aviation, Hospitality and Tourism) • Diploma (Aviation, Hospitality and Tourism)

Faculty of Humanities and Applied Sciences • Ph.D ● M.Phil ● M.Sc. ● M.Com. ● M.A. • B.Sc. ●B.Com. B.A. ● MSW ● BSW

Faculty of Agriculture • Ph.D ● M.Phil ● M.Sc.(Agronomy/Forestry/Horticulture/Soil Science ) • B.Sc.(Agriculture /Horticulture/Forestry/Agriculture + ABM)

Faculty of Law Ph.D ● M.Phil ● LLM ● LLB ● BALLB

(B) Distance Program: • MBA ● PGDCA ● B.Sc.(IT) ●BCA ● B.Com

(C) Non-Collegiate Program: • BA ● MA ● B.Com ●M.Com • BA(JMC) ● MA(JMC) ● BSW ● MSW

The main focus area of the University is specializations in Aeronautical, Petroleum, and Mining Engineering, Agriculture Science, Education, Law and Paramedical programs.{{http://bhagwantuniversity.ac.in/?page_id=381}}

Apart from regular UG and PG programs in engineering, management, pharmacy, education etc, University departments also offer research programs of M.Phil and Ph.D. in selected areas of specializations available with it. The University follows UGC norms for award of PhD degree and peer reviewed research articles are published regularly by its research scholars in national and international journals and conferences.

Student Life

Apart from rigors of academics, the students have various options available to develop their personalities. Sports: Students enjoy their evenings in workout on sports ground including cricket, football, volleyball, badminton [7]

Students also participate in district and state level sports events

[8]

table tennis [9]

Students showcase their talents in cultural activities including dance, mimicry, song, skit, drama etc. [10] [11] [12]

Yuva Divas is celebrated for enlightening students mind [13]

Cultural Events are organized to Celebrate Freshers Welcome, SPorts Day, Farewell Party to Outgoing Batch and Annual Day.

Farewell Fashion Show for Passing Out Final Year Students

Laboratories

Agriculture farm.

Bhagwant University Agriculture Field Work and Produce

CIVIL ENGINEERING

Workshop Practice Lab:The lab is focused to inculcate the basics of engineering practices minds of students. It deals with various different aspects of workshop. It explains the use of different tools, equipments machinery and techniques of manufacturing such as carpentry shop, welding shop, foundry shop etc.

Engineering Mechanics Lab: To analyze the forces, finding resultant forces considering the equilibrium of various bodies encountered in engineering problems.

Fluid Mechanics Lab: This lab deals with finding the behavior of fluid such as discharge, velocity etc under the conditions of rest and motion.

Building Material And Construction Lab:The lab enables the students to know about various materials available for construction and their appropriate selection and usage, depending upon these information the students can study about the cost ,suitability ,sustainability of different materials to be used in construction and their relative substitutes

Surveying And Leveling Lab:This is the most elementary lab for civil engineering students. The lab enables the student to know that how to dealwith the position of points in the horizontal plane and also relative position of points in a vertical plane. The students can plot the topographic map of an area.

Structural Analysis Lab:Structural analysis is the determination of the effects of loads on physical structures and their components. Structures subject to this type of analysis include all that must withstand loads, such as buildings, bridges, vehicles, machinery, furniture, attire, soil strata. Structural analysis incorporates the fields of applied mechanics, materials science and applied mathematics to compute a structures deformations, internal forces, stresses, support reactions, accelerations, and stability. The results of the analysis are used to verify a structures fitness for use, often saving physical tests. Structural analysis is a key part of the engineering design of structures.

Hydraulics and Hydraulic Machines Lab:All organized societies need adequate water supplies, drainage to dispose of waste or excess water, as well as the protection from uncontrolled water. Thus an obvious necessity for a study of hydraulics exists. The lab is mainly concerned with the conveyance of liquids through pipes and channels, esp. as a source of mechanical force or control.

CBSNT Lab:The lab focuses on the usage of discrete mathematics with the help of computers, enabling the students to know about the uses of discrete math’s and also programming language

Geotechnical Engineering lab:As all construction takes place in or on the ground The need to investigate the ground is of vital importance before any construction work takes place. The failure to carry out adequate site investigations often has had dramatic and expensive consequences on construction projects.

Transportation Engineering lab:Transportation engineering section of the civil engineering department is involved with multifarious activities related to highway engineering in particular and transportation engineering in general.

CAD Lab:The lab aims at providing engineering student with a background in descriptive geometry, orthographic projection, engineering drawing techniques, and computer-aided engineering graphics.

Awareness in School Village by Teachers and Students of Bhagwant University

ELECTRONICS & COMMUNICATION ENGINEERING

Microprocessors Lab: In this practical course the students undergo training on the programming and also interfacing different microprocessors and micro-controllers. The facilities in the lab are 8085, 8086 trainer kits. The objective of this lab is to prepare its students with good foundation in microcontroller programming so that they become graduate and effective system engineers.

Communication Lab: This lab is equipped with Digital Storage Oscilloscopes, cathode-ray oscilloscope, Function generators & various kits for implementing and understanding Communication circuits/ techniques. It enhances the knowledge about various Communication techniques like AM, FM, PM, DSB-SC, SSB-SC, PAM, PPM, PWM, PCM etc.

Microwave & Optical Fiber Lab: Microwave and Fiber optics lab is used by B.Tech students to enhance their skills in Microwave Communication field. It consists of various microwave benches having klystron and Gunn diode as microwave sources. By using these benches we can find out various characteristics of microwave devices like couplers, tees, circulators, isolator’s etc.This lab also includes experiments of optical fiber communication. By using the trainers, we can develop analog and digital communication link and also used for verification of multiplexing and de-multiplexing of signal.

Electronic Circuit & Design Lab: In this practical course students will carry out a design oriented project work using various analog/digital building blocks which they have already studied in their analog electronic/digital electronic courses such as Electronic circuits, integrated circuits and filter design. Students will use PIECEPICE software for the purpose of designing which represents a new generation of CAD/CAE software for circuit design.

Internet Lab: The Internet lab is equipped with 40 personal computers having Internet facility (LAN) with 1 Gbps speed. The configuration of computer systems is 1 GB RAM with 80 GB hard disc and core 2 duo (2.40 GHz) processor. The lab provides internet facility for students and faculty members of the department.

DSP Lab: This lab consists of software C studio. It enables you to perform computationally intensive tasks faster than with traditional programming languages such as C, C++, and FORTRAN. we can use this software in a wide range of applications.

Electronics Workshop & PCB Lab: Lab is to learn & design the PCB of various circuits. Lab is well equipped with all types of designing tools & chemicals. Drilling machine, Shearing machine & Transformer winding machine is available in two set for the ease of convenience. Single sided PCB of Analog circuits can be designed in this Lab. Final year students of ECE & EN also use this Lab to complete their project work.

Measurement Lab: The Measurement and Instrumentation Lab is equipped with various transducers and instrumentation trainers, resistive, capacitive and inductive measurement systems, Weins Bridge Oscillator and Wheatstone bridge.. The lab helps the students to gain hands on experience in different types of transducers and measurement systems.

Digital Electronics Lab: Digital Electronics Laboratory is fully equipped with the required instruments such as C.R.O., Multi meters, signal Generator etc. to conduct experiments with digital ICs for UG students. It helps students to enhance their knowledge about various electronics equipments like shift registers, counters, adders, subtractors and seven segment display devices etc .

Analog Integrated Circuit Lab: . This lab is used to enhance the knowledge about various electronics equipments both passive as well as active. This lab is equipped withf various filters, comparators, log antilog amplifiers and peak detector circuits is done using operational amplifier IC. This lab is very essential for students to learn theoretical concept by designing circuits practically.

Control Lab: The Systems and Control Lab is equipped with ac and dc motor controller, synchro transmitter-receiver trainer and digital oscilloscopes. The intention of this lab is to introduce the fundamentals of various analog and digital control systems, for testing, calibration and diagnostic of various control systems, PID controllers and interfacing, and for diverse student projects.

Lab equipment in aeronautical lab of Bhagwant University Ajmer

ELECTRICAL ENGINEERING

Electromechanical Energy Conversion Laboratory: The purpose of the Electromechanical Energy Conversion Laboratory is to conduct certain standard performance tests on machines and transformers to acquire familiarity with dynamic electrical machinery and transformers, measuring instruments, accessories and to build the confidence of working in an electrical environment. This lab is also equipped with a 60 Amperes rectifier, which is used to convert AC into DC Voltage.

Hopkinsons Test: It is designed to demonstrate the fundamental concepts and also facilitates easy learning about the various losses of DC Machine. Both the Machines are flexibly coupled and mounted on a M.S channel Base acts as a Motor Generator set. By adjusting their excitations both of them can be simultaneously loaded (to any extent) where one machine (motoring) feeds mechanical power to the other machine (generating), while the generating machine feeds electrical power to the motoring machine.

Loading of Alternator : An alternator is an electro mechanical device that converts mechanical energy to electrical energy in the form of alternating current. Most alternators use a rotating magnetic field with a stationary armature but occasionally, a rotating armature is used with a stationary magnetic field. An alternator that uses a permanent magnet for its magnetic field is called a magneto.

Loading of DC Generator : A D.C. generator is an energy converter. Mechanical power input received from a prime mover (D.C. motor in this case) is converted electromagnetically into electrical energy. This electrical energy can be changed into heat as is done by connecting load resistors across its armature terminals.

Teachers and Students in local village for corporate social responsibility

Synchronization of Alternator: The frequency of a large electric power system is established by the speed of rotation of alternators all connected by tie-lines in the total network. The collective inertia and power of these generators is so great that there is no single load or disturbance which would be large enough to change their speed of rotation. The frequency of an electric system is remarkably stable. An alternator can only deliver power to an existing electric power system if it operates at the same frequency as the system.

Testing of DC Motor: The objective of this experiment is to conduct performance tests on AC and DC motors. This is accomplished by deter mining the efficiencies of an AC motor and a DC motor when operating under the assigned conditions. A power supply is connected to a SCR (silicon-controlled rectifier) which controls the input voltage to the DC motor.

Testing of Induction Motor: This experiment demonstrates the performance of squirrel-cage induction motors and the method for deriving electrical equivalent circuits from test data.

Transformer Ratio Testing: Mainly two types of transformer testing are done at manufacturer premises – type test of transformer and routine test of transformer. In addition to that some transformer tests are also carried out at the consumer site before commissioning and also periodically in regular & emergency basis through out its service life.

Power Measurement by Wattmeter: Electric power is measured by means of a wattmeter. This instrument is of the electrodynamic type. The actuating force of a wattmeter comes from the field of its current coil and the field of its potential coil.

Wind Energy
Agriculture Students Prepare Seed Bed in Net House

MECHANICAL ENGINEERING

Computer Aided Engineering Graphics Lab: To provide the undergraduate engineering student with a background in descriptive geometry, orthographic projection, engineering drawing techniques, and computer-aided engineering graphics.

Workshop Practice Lab: It is a very vast area and deals with various different aspects of workshop. It explains the use of different tools, equipments machinery and techniques of manufacturing such as carpentry shop, welding shop, foundry shop etc.

Engineering Mechanics Lab: To analyze the forces, finding resultant forces considering the equilibrium of various bodies encountered in engineering problems.

Manufacturing Science Lab: To study about the various manufacturing and machining processes and techniques such as primary shaping processes like casting, bending ,drawing etc and surface finishing processes.

Fluid Mechanics Lab: This lab deals with finding the behavior of fluid such as discharge, velocity etc under the conditions of rest and motion.

Fluid Machinery Lab: This lab is vital for Mechanical Engg. Students. This lab contains pitot static tubes, orifice discharge, jet impact, orifice and venturimeter , Bernoulli’s apparatus etc. experiment on metacentric height, Reynolds no., boundary layer thickness, coefficient of discharge.

Theory of machine Lab: This lab helps the students know about various types of linkage mechanisms. It also includes the working kits of Governors, Balancing Equipment, Gear Trains, Coriolis Components, gyroscope, whirling shaft ,inversions of four bar mechanism, single/double slider crank mechanism .involute gear tooth profile mechanism,etc.

Automobile Engineering Lab: This lab contains various working models and experimental setups like 2 Stroke and 4 Stroke Engines, Steering System, Suspension System, Fuel Supply and Ignition System, differential gear system etc.

Refrigeration & Air-conditioning lab: This lab enables the students to know about various types of Refrigeration and Air Conditioning systems.. The equipments include Refrigeration Test Rig, Cooler, Simple Vapour Compression System, and Domestic Refrigerator, Vapour compression Refrigeration System, Air Conditioner and Cut Sections of different components.

Measurement & Metrology Lab: The measuring devices like vernier caliper, micrometer, tachometer, sine bar, slip gauge, bevel protector, feeler gauge, dial indicator Sine Bar, Slip Gauges, Dial Indicators, Pressure Measurements and Temperature Measurements Equipments, Filler Gauges, Vernier Callipers etc.

Thermodynamics Lab: The overall aim of the Laboratory is to investigate and develop innovative and practical solutions to problems in thermodynamics and heat transfer. The Laboratory includes undergraduate experiments in air conditioning, heat transfer, internal combustion engines, boilers, steam turbine and refrigeration.

Heat & Mass Transfer Lab: It includes experiments like the test rig of thermal conductivity, specific heat of air test rigs, Pin Fin Apparatus, Stephen Boltzmann Const. Apparatus, Heat Flux Apparatus, critical insulation apparatus, two phase heat transfer, parallel/counter heat exchanger etc. Material Science & Testing Lab: This lab is equipped with various testing machines like Universal Testing Machine of 40T capacity, Impact Testing Machine, Hardness Testing Machine, Metallurgical Microscopes, and Polishing Machine etc. This laboratory is used by students for both coursework and project work.

International Linkages

Bhagwant University Delegate in Kasetsart University Bangkok

In order to achieve high standards of technical and professional education the University has understanding with Indian and International Universities such as Educational Consultants India, Gannon University USA, Sheffield University UK, Norwegian University of Applied Sciences, and University of Western Australia, Perth, Regenesys Business School Johannesburg South Africa for student and faculty exchange.{{http://bhagwantuniversity.ac.in/?page_id=242}} Students can go for semester abroad, internship, project work or higher studies to these universities. By associating with above universities Bhagwant University is providing benefits to the students in following activities:

Dr Anil Singh Chancellor with Sheffield Hallam University, United Kingdom Delegates Dr Craig Paterson

[14]

Many of University alumni are working in MNCs, public and private undertakings, and some have gone for higher education to USA, Canada, France, Japan etc. The students are the brand ambassador of the university and are well nurtured by the faculty. Due to this mentor relationship among students and faculty, many foreign students from Nepal, Bhutan, Sudan, Afghanistan, Thailand, Oman etc have pursued their graduate programs at the University.

[15]

Research & Development

The University conducts research and development activities in niche areas of science and technology. Research publications are driving force in successful enterprises.

As a public institution serving the greater national and global good, Bhagwant University has made accelerating the rate of innovation one of the key components of its mission and a key force driving its programs.[16]

Bhagwant University Vice Chancellor at ICTP Trieste Italy on 3rd April 2016

Corporate Social Responsibility

The students and faculty have adapted a village and contribute to its growth through Jan Chetna Program wherein the students and faculty conduct workshop on modern agriculture methods, women empowerment, sports for rural students, tree plantation, drawbacks of ill practices such as child marriage, widow marriage, superstition.

[17] [18]

Chairman Dr Anil Singh and Vice Chairperson Dr Asha Singh are blessed by prominent social activists for their social responsibilities. [19]

Corporate Social Responsibility towards AIDS Awareness in local Village

References

  1. ↑ http://bhagwantuniversity.ac.in/?page_id=578
  2. ↑ http://www.bhagwantgroup.com/bit/downloads/cv_vks2011.pdf
  3. ↑ "Bhagwant University". www.4icu.org. Retrieved Mar 21, 2013.
  4. ↑ http://ncte-india.org/ncte_new/pdf/List%20of%20Private%20Universities%20Offering%20Teacher%20Education%20Programmes.pdf
  5. ↑ http://www.customercarephonenumber.in/bhagwant-university-contact-address-phone-number-email-website/
  6. ↑ http://collegedunia.com/university/25799-bhagwant-university-ajmer/courses-fees
  7. ↑ https://www.youtube.com/watch?v=74dnYgEDHg8
  8. ↑ https://www.youtube.com/watch?v=GFgRhJ6Hp8Q
  9. ↑ https://www.youtube.com/watch?v=23mw_I7jxp4
  10. ↑ https://www.youtube.com/watch?v=gqHdpLumHDs&list=PLX1ZFwuTzpsGrHPKjUmtqsJpfRTJM3r58&index=35
  11. ↑ https://www.youtube.com/watch?v=HYwMTXQNdB4&list=PLX1ZFwuTzpsGrHPKjUmtqsJpfRTJM3r58&index=7
  12. ↑ https://www.youtube.com/watch?v=UXaVDRDaL3Q&list=PLX1ZFwuTzpsGrHPKjUmtqsJpfRTJM3r58&index=13
  13. ↑ http://bhagwantuniversity.ac.in/wp-content/uploads/2016/04/Yuva-Diwas.pdf
  14. ↑ https://www.youtube.com/watch?v=Hxv-THYcqn4&index=20&list=PLX1ZFwuTzpsGrHPKjUmtqsJpfRTJM3r58
  15. ↑ https://www.youtube.com/watch?v=w2h2sL-1A9w
  16. ↑ http://bhagwantuniversity.ac.in/?page_id=4716
  17. ↑ "UGC Act-1956" (PDF). mhrd.gov.in/. Secretary, University Grants Commission. Retrieved 1 February 2016.
  18. ↑ http://epaper.bhaskar.com/detail/?id=958428&boxid=42023624747&ch=0&map=map&currentTab=tabs-1&pagedate=04/20/2016&editioncode=255&pageno=9&view=image
  19. ↑ https://www.youtube.com/watch?v=gIzmiewmh4c&list=PLX1ZFwuTzpsGrHPKjUmtqsJpfRTJM3r58&index=14

External links

Coordinates: 26°32′15″N 74°39′31″E / 26.5373916°N 74.6585627°E / 26.5373916; 74.6585627

This article is issued from Wikipedia - version of the Thursday, May 05, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.