Bogacki–Shampine method

The Bogacki–Shampine method is a method for the numerical solution of ordinary differential equations, that was proposed by Przemyslaw Bogacki and Lawrence F. Shampine in 1989 (Bogacki & Shampine 1989). The Bogacki–Shampine method is a Runge–Kutta method of order three with four stages with the First Same As Last (FSAL) property, so that it uses approximately three function evaluations per step. It has an embedded second-order method which can be used to implement adaptive step size. The Bogacki–Shampine method is implemented in the ode23 function in MATLAB (Shampine & Reichelt 1997).

Low-order methods are more suitable than higher-order methods like the Dormand–Prince method of order five, if only a crude approximation to the solution is required. Bogacki and Shampine argue that their method outperforms other third-order methods with an embedded method of order two.

The Butcher tableau for the Bogacki–Shampine method is:

0
1/2 1/2
3/4 0 3/4
1 2/9 1/3 4/9
2/9 1/3 4/9 0
7/24 1/4 1/3 1/8

Following the standard notation, the differential equation to be solved is y'=f(t,y). Furthermore, y_{n} denotes the numerical solution at time t_{n} and h_{n} is the step size, defined by h_{n}=t_{n+1}-t_{n}. Then, one step of the Bogacki–Shampine method is given by:

{\begin{aligned}k_{1}&=f(t_{n},y_{n})\\k_{2}&=f(t_{n}+{\tfrac {1}{2}}h_{n},y_{n}+{\tfrac {1}{2}}h_{n}k_{1})\\k_{3}&=f(t_{n}+{\tfrac {3}{4}}h_{n},y_{n}+{\tfrac {3}{4}}h_{n}k_{2})\\y_{n+1}&=y_{n}+{\tfrac {2}{9}}h_{n}k_{1}+{\tfrac {1}{3}}h_{n}k_{2}+{\tfrac {4}{9}}h_{n}k_{3}\\k_{4}&=f(t_{n}+h_{n},y_{n+1})\\z_{n+1}&=y_{n}+{\tfrac {7}{24}}h_{n}k_{1}+{\tfrac {1}{4}}h_{n}k_{2}+{\tfrac {1}{3}}h_{n}k_{3}+{\tfrac {1}{8}}h_{n}k_{4}.\end{aligned}}

Here, z_{n+1} is a second-order approximation to the exact solution. The method for calculating y_{n+1} is due to Ralston (1965). On the other hand, y_{n+1} is a third-order approximation, so the difference between y_{n+1} and z_{n+1} can be used to adapt the step size. The FSAL—first same as last—property is that the stage value k_{4} in one step equals k_{1} in the next step; thus, only three function evaluations are needed per step.

References

This article is issued from Wikipedia - version of the Monday, December 14, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.