Bridgman–Stockbarger technique

Crystallization
Concepts
Crystallization · Crystal growth
Recrystallization · Seed crystal
Protocrystalline · Single crystal
Methods and technology
Boules
Bridgman–Stockbarger technique
Czochralski process
Fractional crystallization
Fractional freezing
Hydrothermal synthesis
Laser-heated pedestal growth
Crystal bar process
Fundamentals
Nucleation · Crystal
Crystal structure · Solid

The Bridgman–Stockbarger technique is named after Harvard physicist Percy Williams Bridgman and MIT physicist Donald C. Stockbarger (1895–1952). They are two similar methods primarily used for growing single crystal ingots (boules), but which can be used for solidifying polycrystalline ingots as well.

The methods involve heating polycrystalline material above its melting point and slowly cooling it from one end of its container, where a seed crystal is located. A single crystal of the same crystallographic orientation as the seed material is grown on the seed and is progressively formed along the length of the container. The process can be carried out in a horizontal or vertical geometry.

The Bridgman method is a popular way of producing certain semiconductor crystals such as gallium arsenide, for which the Czochralski process is more difficult.

The difference between the Bridgman[1] technique and Stockbarger[2] technique is subtle: While both methods utilize a temperature gradient and a moving crucible, the Bridgman technique utilizes the relatively uncontrolled gradient produced at the exit of the furnace; the Stockbarger technique introduces a baffle, or shelf, separating two coupled furnaces with temperatures above and below the freezing point. Stockbarger's modification of the Bridgman technique allows for better control over the temperature gradient at the melt/crystal interface.

When seed crystals are not employed as described above, polycrystalline ingots can be produced from a feedstock consisting of rods, chunks, or any irregularly shaped pieces once they are melted and allowed to re-solidify. The resultant microstructures of the ingots so obtained are characteristic of directionally solidified metals and alloys with their aligned grains.

See also

References

  1. Bridgman, Percy W. (1925). . "Certain Physical Properties of Single Crystals of Tungsten, Antimony, Bismuth, Tellurium, Cadmium, Zinc, and Tin" Check |url= value (help). Proceedings of the American Academy of Arts and Sciences 60 (6): 305–383. doi:10.2307/25130058.
  2. Stockbarger, Donald C. (1936). "The Production of Large Single Crystals of Lithium Fluoride". Review of Scientific Instruments 7 (3): 133–136. Bibcode:1936RScI....7..133S. doi:10.1063/1.1752094.


This article is issued from Wikipedia - version of the Thursday, September 03, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.