Bristol Type 138

Type 138 High Altitude Monoplane
The Type 138A over Farnborough c. 1937
Role High-altitude research aircraft
Manufacturer Bristol Aeroplane Company
Designer Frank Barnwell
First flight 11 May 1936
Primary user Royal Aircraft Establishment
Number built 1 (+1 Type 138B airframe not completed)


The Bristol Type 138 High Altitude Monoplane was a British high-altitude research aircraft of the 1930s. It was a single-engine, low-wing monoplane with a fixed, tailwheel undercarriage.

Design and development

The Type 138 was born of a period of intense competition between aviation manufacturers in the 1920s and 1930s. There was a great deal of prestige, as well as technological progress, to be gained from breaking any of the major aviation records: airspeed, distance and altitude. By the 1930s absolute speed and distance records were beyond the resources of individual companies, and required the involvement of national governments.[1]

Bristol were well placed to compete in this field but in the event they found themselves lagging. Between 1929 and 1934, there were a number of altitude records established by rival machines including a Junkers W.34, a Vickers Vespa and a Caproni Ca.113 biplane, as well as the first flight over Everest by a pair of Westland Wallaces in 1933; all these aircraft used Bristol or Bristol-designed engines.[2]

Sensing Air Ministry interest resulting from the success of the Everest flight, Barnwell proposed a purpose-built high-altitude research aircraft in November 1933. This, the Type 138, was a large single-engine, single-seat monoplane with retractable undercarriage and a supercharged Pegasus engine.[3] Nothing came of this until Renato Donati set a new record in April 1934; public opinion demanded a new, government-sponsored record attempt.[2] In June, the Air Ministry issued Specification 2/34 for two prototypes capable of reaching 50,000 ft (15,030 m).[4] Barnwell revised the Type 138 to produce the Type 138A. This was of the original size and configuration but had a special, two-stage supercharged, Pegasus and, although remaining basically a single-seater, had provision for an observer's cockpit to be fitted if required. Weight-saving was a priority; the airframe other than the steel tube engine mount was a wooden monocoque and the undercarriage was replaced with a lightweight, fixed assembly.[5]

The supercharger installation, with detail work by Clifford Tinson, was a two-stage system; the first-stage compressor was permanently engaged but the second-stage was engaged by the pilot at the correct height. The system employed an intercooler between first and second stages.[6]

Considerable research was carried out by the Royal Aircraft Establishment and National Physical Laboratory both to establish the most efficient design for the aircraft and to develop a reliable pressure suit for the pilot. Sir Robert Davis of Siebe Gorman and Professor J.S. Haldane were instrumental in developing the helmet.[7]

The airframe was complete in early 1936 and the Type 138A was flown for the first time on 11 May with a standard Pegasus IV driving a three-bladed propeller, piloted by Cyril Uwins, who had flown the Vickers Vespa on its world record flight. Two more flights were made at Filton before the aircraft was delivered to Farnborough, where tests of the pressure helmet were made before the aircraft was returned to Filton for the special Pegasus and four-blade airscrew to be fitted, being returned to Farnborough on 5 September.[8]

Operational history

Bristol 138 in flight

Squadron Leader F.R.D. Swain was selected to pilot the high-altitude flights. On 28 September 1936, Swain took off from Farnborough and climbed to an indicated 51,000 ft (15,440 m), engaging the auxiliary supercharger at 35,000 ft ( m). Swain ran low on oxygen on the two-hour flight and had to break the window of his pressure helmet once he had descended to a safe height. The data from this flight was homologated by the Fédération Aéronautique Internationale as a world record of 49,967 ft (15,230 m).[6]

After this flight, further development of the aircraft resulted in a number of small modifications. In this mildly revised form, the 138A made six further flights to around 50,000 ft (15,240 m). During this period, Italy increased the record to 51,364 ft (15,656 m). In response, on 30 June 1937, Flight Lieutenant M.J. Adam undertook a 2¼-hour flight in which he achieved a record altitude, later homologated at 53,937 ft (16,440 m). Despite the cockpit canopy cracking, Adam was saved from injury by his pressure suit.[4] After this, research flights continued but no further records were attempted.

A second machine was ordered as the Type 138B in 1935. This was to be a two-seater powered by a Rolls-Royce Kestrel S engine fitted with a similar two-stage supercharger installation and generating 500 hp (370 kW). The airframe was delivered to Farnborough Airfield in 1937 for completion but the engine installation was never completed.[5]

Variants

Type 138
Not built.
Type 138A
One built
Type 138B
One built to use a Rolls-Royce Merlin engine, never flown and became a ground instructional aircraft

Operators

 United Kingdom

Specifications (138A)

Data from Bristol Aircraft since 1910[9]

General characteristics

Performance

See also

Aircraft of comparable role, configuration and era

References

Notes

  1. ↑ Barnes 1964, p. 253.
  2. 1 2 Barnes 1964, p. 254.
  3. ↑ Winchester 2005, pp. 26–27.
  4. 1 2 Thetford 1957, pp. 102–103.
  5. 1 2 Winchester 2005, p. 26.
  6. 1 2 Barnes 1964, p. 255.
  7. ↑ "Bristol Type 138." Flight, 1 October 1936.
  8. ↑ "Height record home again." Flight, 8 July 1937.
  9. ↑ Barnes 1964, p. 256.

Bibliography

  • Barnes, C.H. Bristol Aircraft since 1910. London: Putnam, 1964.
  • Thetford, Owen. Aircraft of the Royal Air Force 1918-57, 1st edition. London: Putnam, 1957.
  • Winchester, Jim. "Bristol Type 138". X-Planes and Prototypes. London: Amber Books Ltd., 2005. ISBN 1-904687-40-7.

External links

Wikimedia Commons has media related to Bristol 138.
This article is issued from Wikipedia - version of the Sunday, December 06, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.