Cadence Design Systems

Cadence Design Systems, Inc.
Public
Traded as NASDAQ: CDNS
Industry Software & Programming
Founded 1988
Headquarters San Jose, California, USA
Key people
 Lip-Bu Tan, President/CEO
Revenue Increase 1.702 billion USD (2015)
Increase $252 million USD (2015)
Number of employees
 5,200 (2013)[1]
Website www.cadence.com

Cadence Design Systems, Inc (NASDAQ: CDNS) is an American electronic design automation (EDA) software and engineering services company, founded in 1988 by the merger of SDA Systems and ECAD, Inc. The company produces software and hardware for designing integrated circuits, systems on chips (SoCs) and printed circuit boards.

Overview

Cadence Design Systems, headquartered in San Jose, California, is a supplier of electronic design technologies and engineering services in the electronic design automation (EDA) industry. The company develops software used to design chips[2] and printed circuit boards,[3] as well as intellectual properties (IP) covering a broad range of areas, including interfaces, memory, analog, SoC peripherals, dataplane processing units, and verification.

Cadence products primarily target FPGA and ASIC design engineers, and are used to move a design into packaged silicon (ASIC), with products for custom and analog design, digital design, mixed-signal design, verification, and package/PCB design.

To help integrate, verify, and implement complex digital SoCs, there are solutions that encompass design IP, timing analysis and signoff, services, and tools and methodologies. The company also provides products that assist with the development of complete hardware and software platforms that support end applications.[4]

History

Cadence Design Systems was the result of a merger perfected in 1988 of Solomon Design Automation (SDA), co-founded in 1983 by Richard Newton, Alberto Sangiovanni-Vincentelli, and James Solomon and ECAD co-founded by Glen Antle and Paul Huang in 1982. Joseph Costello was appointed as CEO from 1988–1997, and Cadence became the largest EDA company during his tenure.

On October 15, 2008, Cadence President and CEO Michael Fister and four other top executives resigned, namely Executive Vice President of Worldwide Field Operations Kevin Bushby, Executive Vice President of Products and Technologies Organization James S. Miller Jr., Executive Vice President and Chief Administrative Officer William Porter and Executive Vice President of Corporate Affairs R. L. Smith McKeithen. This was followed by a large layoff of 20% to 25% of Cadence's employees.[5]

In January 2009, the company announced the appointment of Lip-Bu Tan as President and CEO. Tan was most recently CEO of Walden International, a venture capital firm, and remains chairman of the firm. He has served on the Cadence Board of Directors since 2004, where he served on the Technology Committee for four years.

In 2009, Cadence announced that they would lay-off 225 employees,[6] and new CEO Lip-Bu Tan voluntarily reduced his salary by 20%; Cadence's senior vice-presidents and Board Members took a pay cut of 10%.[7]

In January 2010, Cadence laid-off an additional 120 workers.[8]

In 2013, Cadence celebrated its 25th anniversary. They are offering an online course on the MOOC provider, Udacity, called Functional Hardware Verification.[9]

At the end of 2013, the company employed more than 5,200 people and reported 2013 revenues of approximately $1.46 billion.[10] In November 2007 Cadence was named one of the "50 Best Places to Work in Silicon Valley" by San Jose Magazine.

In April 2014, Cadence acquired Jasper Design Automation, a leader in system on Chip development and IP verification tools, for a $170 million cash acquisition[11]

In late 2014, Cadence opened a new office at Matam, Haifa, the largest and oldest dedicated hi-tech parks in Israel.

Products

Cadence's product offerings are targeted at various types of design and verification tasks which include:

In addition to EDA software, Cadence provides contracted methodology and design services as well as silicon design IP, and has a program aimed at making it easier for other EDA software to interoperate with the company's tools.

Conformal is a family of electronic design automation (EDA) products developed and marketed by Cadence Design Systems for Digital ASIC and Custom ASIC Design. The flagship product, Conformal-LEC belong to the class of Equivalency Checking tools that help verify Design and Netlist transformations through a formal verification proof . There are other products offered in Low Power Verification, Constraint Management, Transistor Verification and their latest offering, a product in ECO automation. Conformal-LEC was first developed by Verplex Corporation in 1998 until the company was acquired by Cadence in 2003.

Lawsuits

Avanti Corporation

Cadence was involved in a 6-year-long legal dispute[16] with Avanti Corporation, in which Cadence claimed Avant! stole Cadence code, and Avant! denied it. According to Business Week "The Avant! case is probably the most dramatic tale of white-collar crime in the history of Silicon Valley".[16] The Avant! executives eventually pleaded no contest and Cadence received several hundred million dollars in restitution. Avant! was then purchased by Synopsys, which paid $265 million more to settle the remaining claims.[17] The case resulted in a number of legal precedents.[18]

Mentor Graphics

The Cadence group Quickturn was also involved in a series of legal events with Mentor Graphics/Aptix.[19] Mentor purchased rights to an Aptix patent, then sued Cadence. In this case, the CEO of Aptix, Amr Mohsen, forged a notebook in order to make the patent case stronger. When suspicions were raised, he staged a break-in of his own car to get rid of the evidence, resulting in charges of obstruction of justice. Trying to avoid this, he attempted to flee the country, only to be caught with an illegal passport and a pile of cash. While in jail for this offense, he was recorded offering money to intimidate witnesses and kill the judge.[20] In order to fight the new charges, he tried to feign psychological problems, but left a trail of evidence of his research into this defense, and how it might be done. He was charged with attempting to delay a federal trial by feigning incompetency,[21] but was convicted anyway.[22] According to the lawyers concerned,[19] the original notebooks were not needed for the trial. The patent filing date, which was not in dispute, would have sufficed.

Acquisitions

Timeline

The company has also acquired Valid Logic Systems, High Level Design (HLD), UniCAD, CadMOS, Simplex, Silicon Perspective, Plato and Get2Chip.

Denali Software

Denali Software, Inc. was an American software company, based in Sunnyvale, California, now acquired by Cadence.[36] The company produces electronic design automation (EDA) software, intellectual property (IP) and design cores and platforms for memory, other standard interfaces and system-on-chip (SoC) design and verification. It has its engineering offices in Sunnyvale, Austin and Bangalore. Incorporated in 1996, Denali is headquartered in Sunnyvale, California and serves the global electronics industry with direct sales and support offices in North America, Europe, Japan and Asia.

On May 2010, Cadence Design Systems announced that it would acquire Denali for $315 million.[37]

Valid Logic Systems

Valid Logic Systems was one of the first commercial electronic design automation (EDA) companies, now acquired by Cadence. It was founded in the early 1980s,[38] along with Daisy Systems Corporation and Mentor Graphics, collectively known as DMV. The engineering founders were L. Curtis Widdoes,[39] Tom McWilliams[40] and Jeff Rubin,[41] all of whom had worked on the S-1 supercomputer project at Livermore Labs.

Valid acquired several companies such as Telesis (PCB layout),[42] Analog Design Tools,[43] and Calma (IC layout). In turn, Valid was acquired by Cadence Design Systems in the early 90s.[44]

Valid built both hardware and software, for schematic capture, logic simulation, static timing analysis, and packaging. Much of the initial software base derived from SCALD ("Structured Computer-Aided Logic Design"), a set of tools developed to support the design of the S-1 supercomputer at Lawrence Livermore National Laboratory.[45] Later, Valid expanded into IC design tools and into printed circuit board layout.

At first, Valid ran schematic capture on a proprietary UNIX workstation, the SCALDSystem, with static timing analysis, simulation, and packaging running on a VAX or IBM-compatible mainframe. However, by the mid-1980s, general purpose workstations were powerful enough, significantly cheaper. Companies such as Mentor Graphics and Cadence Design Systems sold software only for such workstations. By 1990, almost all Valid software was also running on workstations, primarily those from Sun Microsystems.

Notable persons

See also

References

  1. ↑ "Funding Universe". Funding Universe. Retrieved September 23, 2011.
  2. ↑ Design on Diagonal Path in Pursuit of a Faster Chip, John Markoff, New York Times, February 26, 2007
  3. ↑ Cadence Acquires Software Company, New York Times, April 11, 1990. Article describes Cadence acquiring a printed circuit design software company.
  4. ↑ http://www.cadence.com/rl/Resources/financial_reports/cadenceataglance.pdf
  5. ↑ Dylan McGrath, EE Times, "Analysis: With Fister gone, Cadence layoffs may be next". Retrieved March 3rd, 2012.
  6. ↑ "ADMIN", SiliconBeat, "Cadence to layoff 225 employees in 2009". June 10th, 2009. Retrieved March 3rd, 2012.
  7. ↑ UNITED STATES SECURITIES AND EXCHANGE COMMISSION FORM 8-K FILING, "SEC Filing". May 13th, 2009. Retrieved March 3rd, 2012.
  8. ↑ Laura Rich, RecessionWire, "RecessionWire". January 19th, 2010. Retrieved March 3rd, 2012.
  9. ↑ https://www.udacity.com/course/cs348
  10. ↑ Source: Cadence Design Systems fact sheet, http://www.cadence.com/rl/Resources/financial_reports/cadenceataglance.pdf
  11. ↑ Nielson, Samantha. "Cadence enhances IP offerings through acquisitions". Market Realist. Market Realist, Inc. Retrieved September 8, 2014.
  12. ↑ Course description from University of Colorado
  13. ↑ Tutorial from MIT course
  14. 1 2 3 "UNIX Software and CAD tools". Carleton University.
  15. ↑ Sigrity
  16. 1 2 Business Week overview of the entire case, after the criminal trial but before the purchase by Synopsys.
  17. ↑ EEDesign article about the final settlement.
  18. ↑ Cadence v. Avant!: The UTSA and California Trade Secret Law, Danley, J., Berkeley Technology Law Journal, 2004, Vol 19; Part 1, pages 289-308
  19. 1 2 Blind Spots, from IP Law and Business
  20. ↑ In Courts, Threats Become Alarming Fact of Life, Deborah Sontag, New York Times, 20 March 2005
  21. ↑ Odd legal saga takes an ugly turn, Richard Goering, EE Times, 02 August 2004
  22. ↑ Jury finds Mohsen guilty of perjury, obstruction of justice, Dylan McGrath, EE Times, 28 February 2006
  23. ↑ "Cadence Design Systems Annual Report, 1997"., page 14
  24. ↑ "Cadence to Acquire Quickturn Design". The New York Times. 10 December 1998. Retrieved 3 April 2015.
  25. ↑ "Update: Cadence gets lift from Orcad purchase". EETimes.
  26. ↑ Specialized Software Maker Is Said to Be in Buyout Talks, Andrew Ross Sorkin and Michael J. de la Merced, New York Times, Published: June 4, 2007
  27. ↑ "Cadence Withdraws Proposal to Acquire Mentor Graphics".
  28. ↑ "Cadence Completes Acquisition of Denali". 17 Jun 2010. Retrieved 27 May 2012.
  29. ↑ "Cadence Acquires Altos Design Automation".
  30. ↑ Former Azuro CEO Explains Clock Concurrent Optimization
  31. ↑
  32. ↑ "Cadence Expands IP Portfolio with Agreement to Acquire Cosmic Circuits".
  33. ↑ "Cadence to Acquire Tensilica".
  34. ↑ Source: http://www.cadence.com/cadence/newsroom/press_releases/Pages/pr.aspx?xml=061313_Evatronix
  35. ↑ Source: http://www.cadence.com/cadence/newsroom/press_releases/pages/pr.aspx?xml=061614_jasper
  36. ↑ Denali Software. "EDA / IP Solutions for SoC Design and Verification – Denali Software".
  37. ↑ "EE Times - Electronic Engineering Times - Connecting the Global Electronics Community". EETimes.
  38. ↑ Kenneth N. Gilpin; Todd S. Purdum (November 14, 1985). "BUSINESS PEOPLE; Intel Manager Becomes President of Valid Logic". New York Times. Retrieved 2013-10-17.
  39. ↑ Donald MacKenzie (1998). Knowing machines: essays on technical change. MIT Press. ISBN 0-262-63188-1.
  40. ↑ Timothy Prickett Morgan (13 April 2009). "Big-iron brains powers Schooner appliance power - Putting a ding in server size". Servers. The Register. Retrieved 2011-09-22.
  41. ↑ "Electronic Business" 9. Cahners. 1983: 231.
  42. ↑ "Business: Valid Logic to Buy Firm". San Jose Mercury News. February 6, 1987. p. 13E. Retrieved 2013-10-17.
  43. ↑ "Company News: Valid Logic to Buy Analog Design". New York Times. November 23, 1988. Retrieved 2013-10-17.
  44. ↑ "Business: Cadence to Buy Rival Valid". San Jose Mercury News. October 3, 1991. p. 1E. Retrieved 2013-10-17.
  45. ↑ McWilliams, T.M.; Widdoes, L.C. Jr.; Wood, L.L. (1977-09-30). "Advanced digital processor technology base development for Navy applications: the S-1 project". Lawrence Livermore National Laboratory.

External links

This article is issued from Wikipedia - version of the Sunday, May 01, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.