Telephone numbers in China

China telephone numbers
Location
Country China
Continent Asia
Type Open
Access codes
Country calling code +86
International call prefix 00
Trunk prefix 0

Telephone numbers in China are organized and assigned according to the Chinese Telephone Code Plan of mainland China. Land lines and mobile telephone numbers have different structures: land lines use area codes, while mobile phones do not. Land line phone numbers in major cities have 8 digits after the two digit area code, whereas in other areas no less than 7 digits after a three digit area code. Mobile phone numbers have 11 digits without area codes.

Dialing a land line from another land line within the same area does not require dialing the area code. When making a domestic long distance call from a land line phone, the trunk prefix "0" must be dialed first, followed by the area code and the telephone number. Calling a mobile phone from a land line requires the addition of the "0" in front of the mobile phone number if they are not in the same area as well. Mobile to land line calls require the "0" and the area code, if the land line is not within the same area. Mobile to mobile calls does not require the "0". The "0" is never needed when dialing from outside mainland China.

The Special Administrative Regions of Hong Kong and Macau are not part of this numbering plan, and use the country codes 852 and 853, respectively.

In addition, the PRC numbering plan reserves space for Taiwan, but they are not currently used. PRC claims Taiwan and several islands of Fujian which are under the control of the Republic of China. Currently phone numbers in these areas are under the separate international calling code of 886. See Telephone numbers in Taiwan.

Mobile phones

In mainland China, mobile phone numbers have 11 digits in the format 1xx-xxxx-xxxx, in which the first three digits (e.g. 13x, 14x,15x and 18x) designate the mobile phone service provider.

As new numbers were introduced over time, it is possible to recognize the age of a number: The oldest GSM numbers start with 1390…, the second oldest 1380… and 1300… Keeping the same number over time is somewhat associated with stability and reliability of the owner. As the fourth digit was introduced later, thus it is 0 for all old numbers. In further extensions, non-139,138,130 numbers were introduced. The fifth to seventh digit sometimes relates to age and location.

Even earlier, before GSM age, mobile phones had numbers starting with 9. Those numbers were eventually translated into 1390xx9…, where xx were local identifiers.

Mobile service providers can be identified by the first three or four digits as follows:

Prefix Provider Network
130/1/2 China Unicom GSM
133 China Telecom* CDMA
1340–1348 China Mobile GSM
1349 ChinaSat Satellite
135/6/7/8/9 China Mobile GSM
145 China Unicom WCDMA (Data-plans only)
147 China Mobile TD-SCDMA (Data-plans only)
150/1/2/8/9 China Mobile GSM
153 China Telecom* CDMA
155 China Unicom GSM
156 China Unicom GSM (upgradeable to WCDMA)
157 China Mobile TD-SCDMA
1700/1 China Telecom CDMA2000
1705 China Mobile TD-SCDMA/GSM
1707/8/9 China Unicom WCDMA/GSM
1718/9 China Unicom WCDMA/GSM
176 China Unicom FDD-LTE/TD-LTE
177 China Telecom FDD-LTE/TD-LTE
178 China Mobile TD-LTE
180/1 China Telecom CDMA2000
182/3/4/7 China Mobile GSM
185/6 China Unicom WCDMA
187/8 China Mobile TD-SCDMA
189 China Telecom CDMA2000

* Formerly China Unicom

Note: 170 and 171, are allocated to Mobile virtual network operator.

Area 1

The prefix 1 is used exclusively by the national capital, Beijing Municipality.

Area 2

These are area codes for the municipalities of Shanghai, Tianjin and Chongqing, as well as several major cities with early access to telephones. All of these cities have upgraded to an 8-number system in the past decade. The People's Republic of China reserves code 26 for Taipei, capital of Taiwan, which it claims sovereignty over, but does not actually control.

All telephone numbers are 8-digit in these areas (exclude Taipei).

Area 3

These are area codes for the provinces of Hebei, Shanxi and Henan.

Hebei

Shanxi

Henan

Area 4

These are area codes for the autonomous region of Inner Mongolia, and the provinces in Northeast China (Liaoning, Jilin, and Heilongjiang). Additionally, numbers starting 400 are shared-pay (callers are charged local rate anywhere in the country) numbers.

Liaoning

The provincial capital, Shenyang, and Tieling, Fushun, Benxi, uses code 24.

Jilin

Heilongjiang

Inner Mongolia

Area 5

These are area codes for the provinces of Jiangsu, Shandong (predominantly), Anhui, Zhejiang and Fujian.

Jiangsu

The provincial capital of Nanjing uses code 25. All telephone numbers are 8-digit in Jiangsu.

Shandong – Area 5

While most areas in Shandong use the prefix 5, some areas also use the prefix 6.

Anhui

Zhejiang

Fujian

Kinmen, Matsu, and Wuchiu are currently under the control of the Republic of China; and are under the international calling code of 886.

Area 6

All area codes with prefix 6 were assigned in recent years. This prefix (+86 6...) was reserved for Taiwan (+886) during the cold war years.[1]

Shandong – Area 6

While most areas in Shandong use the prefix 5, some areas also use the prefix 6.

Guangdong – Area 6

While most areas in Guangdong use the prefix 7, some areas also use the prefix 6. The provincial capital Guangzhou uses code 20.

Yunnan – Area 6

While most areas in Yunnan use the prefix 8, a couple of areas also use the prefix 6.

Area 7

These are area codes for the central provinces of Hubei, Hunan, Guangdong (predominantly), Jiangxi, and the autonomous region of Guangxi.

Hubei

The provincial capital of Wuhan uses code 27.

Hunan

Guangdong – Area 7

Some areas in Guangdong use the prefix 6, while the provincial capital of Guangzhou uses code 20.

Guangxi

Jiangxi

Area 8

These are area codes for the provinces of Sichuan, Hainan, Guizhou, Yunnan (predominantly) and the autonomous region of Tibet.

Sichuan

The provincial capital of Chengdu, and Meishan, Ziyang uses code 28.

Guizhou

Yunnan – Area 8

Some areas in Yunnan use the prefix 6.

Tibet/Xizang

Hainan

Area 9

These are area codes for northwestern regions including the provinces of Shaanxi, Gansu and Qinghai, as well as the autonomous regions of Ningxia and Xinjiang.

Shaanxi

The provincial capital Xi'an uses code 29. Xianyang uses the same code as Xi'an starting from 16 September 2006.[3]

Gansu

Ningxia

Qinghai

Xinjiang

Emergency Numbers

From within Mainland China, the following emergency numbers are used:

In most cities, the emergency numbers provide assistance in Mandarin Chinese and English.

Others

From within Mainland China, the following special numbers are used:

(ex.962288- Shanghai foreigner assistant hotline,when dialing from other areas within China,dial 021-962288)

International Access Code

The international access code from the PRC is 00. This must also be used for calls to Taiwan, Hong Kong and Macau from the Chinese mainland, together with their separate international codes, as follows:

Place Prefix
Taiwan 00 886 xxx xxx xxx[4]
Hong Kong 00 852 xxxx xxxx[5]
Macau 00 853 xxxx xxxx[6]

See also

References

  1. The story of Taiwan's calling code, Taipei Times, October 5, 2010
  2. Nanhai No.1 & Guangdong Maritime Silk Road Museum, Yangjiang, China
  3. "Document 68168" (in Chinese). Xianyang. 2006-09-16. Archived from the original on 2009-03-05.
  4. China Vista, Eugene Law, China Intercontinental Press, 2004, page 519
  5. China International Business: The Monthly Publication of the Ministry of Foreign Trade and Economic Cooperation, P.R.C, Issues 7-12, Ministry of Foreign Trade and Economic Cooperation, 2002
  6. China Law, Issues 1-6, 2008, page 50

External links

This article is issued from Wikipedia - version of the Thursday, May 05, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.