Confidence interval

In statistics, a confidence interval (CI) is a type of interval estimate of a population parameter. It is an observed interval (i.e., it is calculated from the observations), in principle different from sample to sample, that frequently includes the value of an unobservable parameter of interest if the experiment is repeated. How frequently the observed interval contains the parameter is determined by the confidence level or confidence coefficient. More specifically, the meaning of the term "confidence level" is that, if CI are constructed across many separate data analyses of replicated (and possibly different) experiments, the proportion of such intervals that contain the true value of the parameter will match the given confidence level.[1][2][3] Whereas two-sided confidence limits form a confidence interval, their one-sided counterparts are referred to as lower/upper confidence bounds (or limits).

Confidence intervals consist of a range of values (interval) that act as good estimates of the unknown population parameter; however, the interval computed from a particular sample does not necessarily include the true value of the parameter. When we say, "we are 99% confident that the true value of the parameter is in our confidence interval", we express that 99% of the hypothetically observed confidence intervals will hold the true value of the parameter. After any particular sample is taken, the population parameter is either in the interval, realized or not; it is not a matter of chance. The desired level of confidence is set by the researcher (not determined by data). If a corresponding hypothesis test is performed, the confidence level is the complement of respective level of significance, i.e. a 95% confidence interval reflects a significance level of 0.05.[4] The confidence interval contains the parameter values that, when tested, should not be rejected with the same sample. Greater levels of variance yield larger confidence intervals, and hence less precise estimates of the parameter. Confidence intervals of difference parameters not containing 0 imply that there is a statistically significant difference between the populations.

In applied practice, confidence intervals are typically stated at the 95% confidence level.[5] However, when presented graphically, confidence intervals can be shown at several confidence levels, for example 90%, 95% and 99%.

Certain factors may affect the confidence interval size including size of sample, level of confidence, and population variability. A larger sample size normally will lead to a better estimate of the population parameter.

Confidence intervals were introduced to statistics by Jerzy Neyman in a paper published in 1937.[3]

Conceptual basis

In this bar chart, the top ends of the bars indicate observation means and the red line segments represent the confidence intervals surrounding them. Although the bars are shown as symmetric in this chart, they do not have to be symmetric.

Introduction

Interval estimates can be contrasted with point estimates. A point estimate is a single value given as the estimate of a population parameter that is of interest, for example the mean of some quantity. An interval estimate specifies instead a range within which the parameter is estimated to lie. Confidence intervals are commonly reported in tables or graphs along with point estimates of the same parameters, to show the reliability of the estimates.

For example, a confidence interval can be used to describe how reliable survey results are. In a poll of election voting-intentions, the result might be that 40% of respondents intend to vote for a certain party. A 99% confidence interval for the proportion in the whole population having the same intention on the survey might be 30% to 50%. From the same data one may calculate a 90% confidence interval, which in this case might be 37% to 43%. A major factor determining the length of a confidence interval is the size of the sample used in the estimation procedure, for example the number of people taking part in a survey.

Meaning and interpretation

For users of frequentist methods, various interpretations of a confidence interval can be given (taking the 90% confidence interval as an example in the following).

In each of the above, the following applies: If the true value of the parameter lies outside the 90% confidence interval once it has been calculated, then an event has occurred which had a probability of 10% (or less) of happening by chance.

Misunderstandings

Confidence intervals are frequently misunderstood, and published studies have shown that even professional scientists often misinterpret them.[7][8][9][10]

Deborah Mayo expands on this further as follows:[13]
"It must be stressed, however, that having seen the value [of the data], Neyman-Pearson theory never permits one to conclude that the specific confidence interval formed covers the true value of 0 with either (1 - α)100% probability or (1 - α)100% degree of confidence. Seidenfeld's remark seems rooted in a (not uncommon) desire for Neyman-Pearson confidence intervals to provide something which they cannot legitimately provide; namely, a measure of the degree of probability, belief, or support that an unknown parameter value lies in a specific interval. Following Savage (1962), the probability that a parameter lies in a specific interval may be referred to as a measure of final precision. While a measure of final precision may seem desirable, and while confidence levels are often (wrongly) interpreted as providing such a measure, no such interpretation is warranted. Admittedly, such a misinterpretation is encouraged by the word 'confidence'."

Philosophical issues

The principle behind confidence intervals was formulated to provide an answer to the question raised in statistical inference of how to deal with the uncertainty inherent in results derived from data that are themselves only a randomly selected subset of a population. There are other answers, notably that provided by Bayesian inference in the form of credible intervals. Confidence intervals correspond to a chosen rule for determining the confidence bounds, where this rule is essentially determined before any data are obtained, or before an experiment is done. The rule is defined such that over all possible datasets that might be obtained, there is a high probability ("high" is specifically quantified) that the interval determined by the rule will include the true value of the quantity under consideration. That is a fairly straightforward and reasonable way of specifying a rule for determining uncertainty intervals. The Bayesian approach appears to offer intervals that can, subject to acceptance of an interpretation of "probability" as Bayesian probability, be interpreted as meaning that the specific interval calculated from a given dataset has a certain probability of including the true value, conditional on the data and other information available. The confidence interval approach does not allow this, since in this formulation and at this same stage, both the bounds of the interval and the true values are fixed values and there is no randomness involved.

For example, in the poll example outlined in the introduction, to be 95% confident that the actual number of voters intending to vote for the party in question is between 36% and 44%, should not be interpreted in the common-sense interpretation that there is a 95% probability that the actual number of voters intending to vote for the party in question is between 36% and 44%. The actual meaning of confidence levels and confidence intervals is rather more subtle. In the above case, a correct interpretation would be as follows: If the polling were repeated a large number of times (you could produce a 95% confidence interval for your polling confidence interval), each time generating about a 95% confidence interval from the poll sample, then 95% of the generated intervals would contain the true percentage of voters who intend to vote for the given party. Each time the polling is repeated, a different confidence interval is produced; hence, it is not possible to make absolute statements about probabilities for any one given interval. For more information, see the section on meaning and interpretation.

The questions concerning how an interval expressing uncertainty in an estimate might be formulated, and of how such intervals might be interpreted, are not strictly mathematical problems and are philosophically problematic.[15] Mathematics can take over once the basic principles of an approach to 'inference' have been established, but it has only a limited role in saying why one approach should be preferred to another: For example, a confidence level of 95% is often used in the biological sciences, but this is a matter of convention or arbitration. In the physical sciences, a much higher level may be used.[16]

Relationship with other statistical topics

Statistical hypothesis testing

Confidence intervals are closely related to statistical significance testing. For example, if for some estimated parameter θ one wants to test the null hypothesis that θ = 0 against the alternative that θ ≠ 0, then this test can be performed by determining whether the confidence interval for θ contains 0.

More generally, given the availability of a hypothesis testing procedure that can test the null hypothesis θ = θ0 against the alternative that θ ≠ θ0 for any value of θ0, then a confidence interval with confidence level γ = 1 − α can be defined as containing any number θ0 for which the corresponding null hypothesis is not rejected at significance level α.[17]

If the estimates of two parameters (for example, the mean values of a variable in two independent groups) have confidence intervals that do not overlap, then the difference between the two values is more significant than indicated by the individual values of α.[18] So, this "test" is too conservative and can lead to a result that is more significant than the individual values of α would indicate. If two confidence intervals overlap, the two means still may be significantly different.[19][20][21] Accordingly, and consistent with the Mantel-Haenszel Chi-squared test, is a proposed fix whereby one reduces the error bounds for the two means by multiplying them by the square root of ½ (0.707107) before making the comparison.[22]

While the formulations of the notions of confidence intervals and of statistical hypothesis testing are distinct they are in some senses related and to some extent complementary. While not all confidence intervals are constructed in this way, one general purpose approach to constructing confidence intervals is to define a 100(1 − α)% confidence interval to consist of all those values θ0 for which a test of the hypothesis θ = θ0 is not rejected at a significance level of 100α%. Such an approach may not always be available since it presupposes the practical availability of an appropriate significance test. Naturally, any assumptions required for the significance test would carry over to the confidence intervals.

It may be convenient to make the general correspondence that parameter values within a confidence interval are equivalent to those values that would not be rejected by a hypothesis test, but this would be dangerous. In many instances the confidence intervals that are quoted are only approximately valid, perhaps derived from "plus or minus twice the standard error", and the implications of this for the supposedly corresponding hypothesis tests are usually unknown.

It is worth noting that the confidence interval for a parameter is not the same as the acceptance region of a test for this parameter, as is sometimes thought. The confidence interval is part of the parameter space, whereas the acceptance region is part of the sample space. For the same reason the confidence level is not the same as the complementary probability of the level of significance.

Confidence region

Main article: Confidence region

Confidence regions generalize the confidence interval concept to deal with multiple quantities. Such regions can indicate not only the extent of likely sampling errors but can also reveal whether (for example) it is the case that if the estimate for one quantity is unreliable then the other is also likely to be unreliable.

Confidence band

Main article: Confidence band

A confidence band is used in statistical analysis to represent the uncertainty in an estimate of a curve or function based on limited or noisy data. Similarly, a prediction band is used to represent the uncertainty about the value of a new data-point on the curve, but subject to noise. Confidence and prediction bands are often used as part of the graphical presentation of results of a regression analysis.

Confidence bands are closely related to confidence intervals, which represent the uncertainty in an estimate of a single numerical value. "As confidence intervals, by construction, only refer to a single point, they are narrower (at this point) than a confidence band which is supposed to hold simultaneously at many points."[23]

Basic Steps

The basic breakdown of how to calculate a confidence interval for a population mean is as follows:

1. Identify the sample mean, \bar{x} . While \bar{x} differs from \mu, population mean, they are still calculated the same way: \sum {x_i \over n} .
2. Identify whether the standard deviation is known, \sigma, or unknown, s.
  • If standard deviation is known then z* is used as the critical value. This value is only dependent on the confidence level for the test. Typical confidence levels are:[24]
99% 2.58
95% 1.96
90% 1.64
  • If the standard deviation is unknown then t* is used as the critical value. This value is dependent on the confidence level (C) for the test and degrees of freedom. The degrees of freedom is found by subtracting one from the number of observations, n-1. The critical value is found from the t-distribution table. In this table the critical value is written as tα(r), where r is the degrees of freedom and \alpha = {1-C \over 2}.
3. Plug the found values into the appropriate equations:
  • For a known standard deviation: (\bar{x} - z^* {\sigma \over \sqrt{n}}, \bar{x} + z^* {\sigma \over \sqrt{n}})
  • For an unknown standard deviation: (\bar{x} - t^* {s \over \sqrt{n}}, \bar{x} + t^* {s \over \sqrt{n}})
4. The final step is to interpret the answer. Since the found answer is an interval with an upper and lower bound it is appropriate to state that based on the given data we are __ % (dependent on the confidence level) confident that the true mean of the population is between __ (lower bound) and __ (upper bound).[25]

Statistical theory

Definition

Let X be a random sample from a probability distribution with statistical parameters θ, which is a quantity to be estimated, and ϕ, representing quantities that are not of immediate interest. A confidence interval for the parameter θ, with confidence level or confidence coefficient γ, is an interval with random endpoints (u(X), v(X)), determined by the pair of random variables u(X) and v(X), with the property:

{\Pr}_{\theta,\phi}(u(X)<\theta<v(X))=\gamma\text{ for all }(\theta,\phi).

The quantities ϕ in which there is no immediate interest are called nuisance parameters, as statistical theory still needs to find some way to deal with them. The number γ, with typical values close to but not greater than 1, is sometimes given in the form 1 − α (or as a percentage 100%·(1 − α)), where α is a small non-negative number, close to 0.

Here Prθ,ϕ indicates the probability distribution of X characterised by (θ, ϕ). An important part of this specification is that the random interval (u(X), v(X)) covers the unknown value θ with a high probability no matter what the true value of θ actually is.

Note that here Prθ,ϕ need not refer to an explicitly given parameterised family of distributions, although it often does. Just as the random variable X notionally corresponds to other possible realizations of x from the same population or from the same version of reality, the parameters (θ, ϕ) indicate that we need to consider other versions of reality in which the distribution of X might have different characteristics.

In a specific situation, when x is the outcome of the sample X, the interval (u(x), v(x)) is also referred to as a confidence interval for θ. Note that it is no longer possible to say that the (observed) interval (u(x), v(x)) has probability γ to contain the parameter θ. This observed interval is just one realization of all possible intervals for which the probability statement holds.

Approximate confidence intervals

In many applications, confidence intervals that have exactly the required confidence level are hard to construct. But practically useful intervals can still be found: the rule for constructing the interval may be accepted as providing a confidence interval at level γ if

{\Pr}_{\theta,\phi}(u(X)<\theta<v(X))\approx\gamma\text{ for all }(\theta,\phi)\,

to an acceptable level of approximation. Alternatively, some authors[26] simply require that

{\Pr}_{\theta,\phi}(u(X)<\theta<v(X))\ge\gamma\text{ for all }(\theta,\phi)\,

which is useful if the probabilities are only partially identified, or imprecise.

Desirable properties

When applying standard statistical procedures, there will often be standard ways of constructing confidence intervals. These will have been devised so as to meet certain desirable properties, which will hold given that the assumptions on which the procedure rely are true. These desirable properties may be described as: validity, optimality and invariance. Of these "validity" is most important, followed closely by "optimality". "Invariance" may be considered as a property of the method of derivation of a confidence interval rather than of the rule for constructing the interval. In non-standard applications, the same desirable properties would be sought.

Methods of derivation

For non-standard applications, there are several routes that might be taken to derive a rule for the construction of confidence intervals. Established rules for standard procedures might be justified or explained via several of these routes. Typically a rule for constructing confidence intervals is closely tied to a particular way of finding a point estimate of the quantity being considered.

Descriptive statistics
This is closely related to the method of moments for estimation. A simple example arises where the quantity to be estimated is the mean, in which case a natural estimate is the sample mean. The usual arguments indicate that the sample variance can be used to estimate the variance of the sample mean. A naive confidence interval for the true mean can be constructed centered on the sample mean with a width which is a multiple of the square root of the sample variance.
Likelihood theory
Where estimates are constructed using the maximum likelihood principle, the theory for this provides two ways of constructing confidence intervals or confidence regions for the estimates. One way is by using Wilks's theorem to find all the possible values of \theta that fulfill the following restriction:[27]

\ln \left( L\left( \theta \right) \right)\ge \ln \left( L\left( {\hat{\theta }} \right) \right)-\frac{1}{2}{{\chi }^{2}}_{1,1-\alpha }

Estimating equations
The estimation approach here can be considered as both a generalization of the method of moments and a generalization of the maximum likelihood approach. There are corresponding generalizations of the results of maximum likelihood theory that allow confidence intervals to be constructed based on estimates derived from estimating equations.
Via significance testing
If significance tests are available for general values of a parameter, then confidence intervals/regions can be constructed by including in the 100p% confidence region all those points for which the significance test of the null hypothesis that the true value is the given value is not rejected at a significance level of (1-p).[17]
Bootstrapping
In situations where the distributional assumptions for that above methods are uncertain or violated, resampling methods allow construction of confidence intervals or prediction intervals. The observed data distribution and the internal correlations are used as the surrogate for the correlations in the wider population.

Examples

Practical example

A machine fills cups with a liquid, and is supposed to be adjusted so that the content of the cups is 250 g of liquid. As the machine cannot fill every cup with exactly 250.0 g, the content added to individual cups shows some variation, and is considered a random variable X. This variation is assumed to be normally distributed (although this assumption is not necessary for the theory to work) around the desired average of 250 g, with a standard deviation, σ, of 2.5 g. To determine if the machine is adequately calibrated, a sample of n = 25 cups of liquid are chosen at random and the cups are weighed. The resulting measured masses of liquid are X1, ..., X25, a random sample from X.

To get an impression of the expectation μ, it is sufficient to give an estimate. The appropriate estimator is the sample mean:

\hat \mu=\bar X = \frac{1}{n}\sum_{i=1}^n X_i.

The sample shows actual weights x1, ..., x25, with mean:

\bar x=\frac {1}{25} \sum_{i=1}^{25} x_i = 250.2\,\text{grams}.

If we take another sample of 25 cups, we could easily expect to find mean values like 250.4 or 251.1 grams. A sample mean value of 280 grams however would be extremely rare if the mean content of the cups is in fact close to 250 grams. There is a whole interval around the observed value 250.2 grams of the sample mean within which, if the whole population mean actually takes a value in this range, the observed data would not be considered particularly unusual. Such an interval is called a confidence interval for the parameter μ. How do we calculate such an interval? The endpoints of the interval have to be calculated from the sample, so they are statistics, functions of the sample X1, ..., X25 and hence random variables themselves.

In our case we may determine the endpoints by considering that the sample mean X from a normally distributed sample is also normally distributed, with the same expectation μ, but with a standard error of:

\frac {\sigma}{\sqrt{n}}=\frac {2.5~\text{g}}{\sqrt{25}}=0.5\ \text{grams}

By standardizing, we get a random variable:

Z = \frac {\bar X-\mu}{\sigma/\sqrt{n}} =\frac {\bar X-\mu}{0.5}

dependent on the parameter μ to be estimated, but with a standard normal distribution independent of the parameter μ. Hence it is possible to find numbers −z and z, independent of μ, between which Z lies with probability 1 − α, a measure of how confident we want to be.

We take 1 − α = 0.95, for example. So we have:

\!P(-z\le Z\le z) = 1-\alpha = 0.95.

The number z follows from the cumulative distribution function, in this case the cumulative normal distribution function:

\begin{align} \Phi(z) & = P(Z \le z) = 1 - \tfrac{\alpha}{2} = 0.975,\\[6pt] z & = \Phi^{-1}(\Phi(z)) = \Phi^{-1}(0.975) = 1.96, \end{align}

and we get:

\begin{align} 0.95 & = 1-\alpha=P(-z \le Z \le z)=P \left(-1.96 \le \frac {\bar X-\mu}{\sigma/\sqrt{n}} \le 1.96 \right) \\[6pt] & = P \left( \bar X - 1.96 \frac{\sigma}{\sqrt{n}} \le \mu \le \bar X + 1.96 \frac{\sigma}{\sqrt{n}}\right) \end{align}.

In other words, the lower endpoint of the 95% confidence interval is:

\text{Lower endpoint} = \bar X - 1.96 \frac{\sigma}{\sqrt{n}},

and the upper endpoint of the 95% confidence interval is:

\text{Upper endpoint} = \bar X + 1.96 \frac{\sigma}{\sqrt{n}}.

With the values in this example, the confidence interval is:

\begin{align} 0.95 & = P\left(\bar X - 1.96 \times 0.5 \le \mu \le \bar X + 1.96 \times 0.5\right) \\[6pt] & = P \left( \bar X - 0.98 \le \mu \le \bar X + 0.98 \right). \end{align}

As the standard deviation of the population σ is known in this case, the distribution of the sample mean \bar X is a normal distribution with \mu the only unknown parameter. In the theoretical example below, the parameter σ is also unknown, which calls for using the Student's t-distribution.

Interpretation

This might be interpreted as: with probability 0.95 we will find a confidence interval in which the value of parameter μ will be between the stochastic endpoints

\! \bar X - 0{.}98

and

\! \bar X + 0.98.

This does not mean there is 0.95 probability that the value of parameter μ is in the interval obtained by using the currently computed value of the sample mean,

(\bar{x}-0.98,\, \bar{x}+0.98).

Instead, every time the measurements are repeated, there will be another value for the mean X of the sample. In 95% of the cases μ will be between the endpoints calculated from this mean, but in 5% of the cases it will not be. The actual confidence interval is calculated by entering the measured masses in the formula. Our 0.95 confidence interval becomes:

(\bar x - 0.98;\bar x + 0.98) = (250.2 - 0.98; 250.2 + 0.98) = (249.22; 251.18).\,
The blue vertical line segments represent 50 realizations of a confidence interval for the population mean μ, represented as a red horizontal dashed line; note that some confidence intervals do not contain the population mean, as expected.

In other words, the 95% confidence interval is between the lower endpoint 249.22 g and the upper endpoint 251.18 g.

As the desired value 250 of μ is within the resulted confidence interval, there is no reason to believe the machine is wrongly calibrated.

The calculated interval has fixed endpoints, where μ might be in between (or not). Thus this event has probability either 0 or 1. One cannot say: "with probability (1 − α) the parameter μ lies in the confidence interval." One only knows that by repetition in 100(1 − α) % of the cases, μ will be in the calculated interval. In 100α% of the cases however it does not. And unfortunately one does not know in which of the cases this happens. That is (instead of using the term "probability") why one can say: "with confidence level 100(1 − α) %, μ lies in the confidence interval."

The maximum error is calculated to be 0.98 since it is the difference between value that we are confident of with upper or lower endpoint.

The figure on the right shows 50 realizations of a confidence interval for a given population mean μ. If we randomly choose one realization, the probability is 95% we end up having chosen an interval that contains the parameter; however we may be unlucky and have picked the wrong one. We will never know; we are stuck with our interval.

Theoretical example

Suppose {X1, ..., Xn} is an independent sample from a normally distributed population with unknown (parameters) mean μ and variance σ2. Let

\bar{X}=(X_1+\cdots+X_n)/n\,,
S^2=\frac{1}{n}\sum_{i=1}^n\left(X_i-\bar{X}\,\right)^2.

Where X is the sample mean, and S2 is the sample variance. Then

T=\frac{\bar{X}-\mu}{S/\sqrt{n}}

has a Student's t-distribution with n − 1 degrees of freedom.[28] Note that the distribution of T does not depend on the values of the unobservable parameters μ and σ2; i.e., it is a pivotal quantity. Suppose we wanted to calculate a 95% confidence interval for μ. Then, denoting c as the 97.5th percentile of this distribution,

\Pr\left(-c\le T \le c\right)=0.95\,

("97.5th" and "0.95" are correct in the preceding expressions. There is a 2.5% chance that T will be less than −c and a 2.5% chance that it will be larger than +c. Thus, the probability that T will be between −c and +c is 95%.)

Consequently,

\Pr\left(\bar{X} - \frac{cS}{\sqrt{n}} \le \mu \le \bar{X} + \frac{cS}{\sqrt{n}} \right)=0.95\,

and we have a theoretical (stochastic) 95% confidence interval for μ.

After observing the sample we find values x for X and s for S, from which we compute the confidence interval

\left[ \bar{x} - \frac{cs}{\sqrt{n}}, \bar{x} + \frac{cs}{\sqrt{n}} \right], \,

an interval with fixed numbers as endpoints, of which we can no longer say there is a certain probability it contains the parameter μ; either μ is in this interval or isn't.

Alternatives and critiques

Main article: Interval estimation

Confidence intervals are one method of interval estimation, and the most widely used in frequentist statistics. An analogous concept in Bayesian statistics is credible intervals, while an alternative frequentist method is that of prediction intervals which, rather than estimating parameters, estimate the outcome of future samples. For other approaches to expressing uncertainty using intervals, see interval estimation.

Comparison to prediction intervals

Main article: Prediction interval

A prediction interval for a random variable is defined similarly to a confidence interval for a statistical parameter. Consider an additional random variable Y which may or may not be statistically dependent on the random sample X. Then (u(X), v(X)) provides a prediction interval for the as-yet-to-be observed value y of Y if

{\Pr}_{\theta,\phi}(u(X) < Y < v(X)) = \gamma\text{ for all }(\theta,\phi).\,

Here Prθ,φ indicates the joint probability distribution of the random variables (X, Y), where this distribution depends on the statistical parameters (θ, φ).

Comparison to tolerance intervals

Main article: Tolerance interval

Comparison to Bayesian interval estimates

A Bayesian interval estimate is called a credible interval. Using much of the same notation as above, the definition of a credible interval for the unknown true value of θ is, for a given γ,[29]

\Pr(u(x)<\Theta<v(x) | X = x)=\gamma. \,

Here Θ is used to emphasize that the unknown value of θ is being treated as a random variable. The definitions of the two types of intervals may be compared as follows.

Note that the treatment of the nuisance parameters above is often omitted from discussions comparing confidence and credible intervals but it is markedly different between the two cases.

In some simple standard cases, the intervals produced as confidence and credible intervals from the same data set can be identical. They are very different if informative prior information is included in the Bayesian analysis; and may be very different for some parts of the space of possible data even if the Bayesian prior is relatively uninformative.

Users of Bayesian methods, if they produced an interval estimate, would in contrast to confidence intervals, want to say "My degree of belief that the parameter is in fact in this interval is 90%,"[30] while users of prediction intervals would instead say "I predict that the next sample will fall in this interval 90% of the time."

There is disagreement about which of these methods produces the most useful results: the mathematics of the computations are rarely in question–confidence intervals being based on sampling distributions, credible intervals being based on Bayes' theorem–but the application of these methods, the utility and interpretation of the produced statistics, is debated.

Confidence intervals for proportions and related quantities

An approximate confidence interval for a population mean can be constructed for random variables that are not normally distributed in the population, relying on the central limit theorem, if the sample sizes and counts are big enough. The formulae are identical to the case above (where the sample mean is actually normally distributed about the population mean). The approximation will be quite good with only a few dozen observations in the sample if the probability distribution of the random variable is not too different from the normal distribution (e.g. its cumulative distribution function does not have any discontinuities and its skewness is moderate).

One type of sample mean is the mean of an indicator variable, which takes on the value 1 for true and the value 0 for false. The mean of such a variable is equal to the proportion that have the variable equal to one (both in the population and in any sample). This is a useful property of indicator variables, especially for hypothesis testing. To apply the central limit theorem, one must use a large enough sample. A rough rule of thumb is that one should see at least 5 cases in which the indicator is 1 and at least 5 in which it is 0. Confidence intervals constructed using the above formulae may include negative numbers or numbers greater than 1, but proportions obviously cannot be negative or exceed 1. Additionally, sample proportions can only take on a finite number of values, so the central limit theorem and the normal distribution are not the best tools for building a confidence interval. See "Binomial proportion confidence interval" for better methods which are specific to this case.

See also

Confidence interval for specific distributions

References

  1. 1 2 Cox D.R., Hinkley D.V. (1974) Theoretical Statistics, Chapman & Hall, p49, p209
  2. 1 2 Kendall, M.G. and Stuart, D.G. (1973) The Advanced Theory of Statistics. Vol 2: Inference and Relationship, Griffin, London. Section 20.4
  3. 1 2 3 4 Neyman, J. (1937). "Outline of a Theory of Statistical Estimation Based on the Classical Theory of Probability". Philosophical Transactions of the Royal Society A 236: 333–380. doi:10.1098/rsta.1937.0005.
  4. ↑ Field, Andy (2013). Discovering statistics using SPSS. London: SAGE.
  5. ↑ Zar, J.H. (1984) Biostatistical Analysis. Prentice Hall International, New Jersey. pp 43–45
  6. ↑ Cox D.R., Hinkley D.V. (1974) Theoretical Statistics, Chapman & Hall, p214, 225, 233
  7. ↑
  8. ↑
  9. ↑ Hoekstra, R., R. D. Morey, J. N. Rouder, and E-J. Wagenmakers, 2014. Robust misinterpretation of confidence intervals. Psychonomic Bulletin Review, in press.
  10. ↑ Scientists’ grasp of confidence intervals doesn’t inspire confidence, Science News, July 3, 2014
  11. ↑ Morey, R.D., Hoekstra, R., Lee, M.D., Rouder, J.N., Wagenmakers, E-J. (2015) The Fallacy of Placing Confidence in Confidence Intervals. in press.
  12. ↑ "1.3.5.2. Confidence Limits for the Mean". nist.gov.
  13. ↑ Mayo, D. G. (1981) "In defence of the Neyman-Pearson theory of confidence intervals", Philosophy of Science, 48 (2), 269–280. JSTOR 187185
  14. ↑ Pav Kalinowski. Understanding Confidence Intervals (CIs) and Effect Size Estimation. Association for Psychological Science Observer April 10, 2010. http://www.psychologicalscience.org/index.php/publications/observer/2010/april-10/understanding-confidence-intervals-cis-and-effect-size-estimation.html
  15. ↑ T. Seidenfeld, Philosophical Problems of Statistical Inference: Learning from R.A. Fisher, Springer-Verlag, 1979
  16. ↑ "Statistical significance defined using the five sigma standard".
  17. 1 2 Cox D.R., Hinkley D.V. (1974) Theoretical Statistics, Chapman & Hall, Section 7.2(iii)
  18. ↑ Pav Kalinowski, "Understanding Confidence Intervals (CIs) and Effect Size Estimation", Observer Vol.23, No.4 April 2010.
  19. ↑ Andrea Knezevic, "Overlapping Confidence Intervals and Statistical Significance", StatNews # 73: Cornell Statistical Consulting Unit, October 2008.
  20. ↑ Goldstein, H.; Healey, M.J.R. (1995). "The graphical presentation of a collection of means". Journal of the Royal Statistical Society 158: 175–77. doi:10.2307/2983411.
  21. ↑ Wolfe R, Hanley J (Jan 2002). "If we're so different, why do we keep overlapping? When 1 plus 1 doesn't make 2". CMAJ 166 (1): 65–6. PMC 99228. PMID 11800251.
  22. ↑ Daniel Smith, "Overlapping confidence intervals are not a statistical test", California Dept of Health Services, 26th Annual Institute on Research and Statistics, Sacramento, CA, March, 2005.
  23. ↑ p.65 in W. Härdle, M. Müller, S. Sperlich, A. Werwatz (2004), Nonparametric and Semiparametric Models, Springer, ISBN 3540207228
  24. ↑ "Checking Out Statistical Confidence Interval Critical Values - For Dummies". www.dummies.com. Retrieved 2016-02-11.
  25. ↑ "Confidence Intervals". www.stat.yale.edu. Retrieved 2016-02-11.
  26. ↑ George G. Roussas (1997) A Course in Mathematical Statistics, 2nd Edition, Academic Press, p397
  27. ↑ Abramovich, Felix, and Ya'acov Ritov. Statistical Theory: A Concise Introduction. CRC Press, 2013. Pages 121-122
  28. ↑ Rees. D.G. (2001) Essential Statistics, 4th Edition, Chapman and Hall/CRC. ISBN 1-58488-007-4 (Section 9.5)
  29. ↑ Bernardo JE, Smith, Adrian (2000). Bayesian theory. New York: Wiley. p. 259. ISBN 0-471-49464-X.
  30. ↑ Cox D.R., Hinkley D.V. (1974) Theoretical Statistics, Chapman & Hall, p390

Bibliography

External links

Wikimedia Commons has media related to Confidence interval.

Online calculators

This article is issued from Wikipedia - version of the Wednesday, May 04, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.