Cruiser Mk III

Tank, Cruiser, Mk III (A13 Mk I)
Type Cruiser tank
Place of origin United Kingdom
Service history
In service 1938–1941
Used by British Army
Wars Second World War
Production history
Designer Morris Commercial Cars[1]
Designed 1936/1937
Manufacturer Nuffield Mechanisations & Aero, Limited
Produced 1938–1939
Number built 65
Specifications
Weight 14 Long tons (14.2 tonnes)
Length 19 ft 8 in (6.0 m)[2]
Width 8 ft 4 in (2.54 m)[1]
Height 8 ft 6 in (2.59 m)[1]
Crew 4 (commander, gunner, loader, driver)
Armour 6–14 mm
Main
armament
 QF 2-pounder gun
87 rounds
Secondary
armament
 .303 Vickers machine gun
3,750 rounds
Engine Nuffield Liberty V12 petrol
340 hp (250 kW)
Suspension Christie
Operational
range
 90 mi (140 km)[1]
Speed 30 mph (48 km/h)[1]

The Tank, Cruiser, Mk III, also known by its General Staff specification number A13 Mark I, was a British cruiser tank of the Second World War. It was the first British cruiser tank to use the Christie suspension system, which gave higher speeds and better cross-country performance; previous models of cruiser tanks had used triple wheeled bogie suspension.

Design and development

British cruiser tank design began with the Mk I and somewhat heavier Mk II in the mid-1930s. Just as prototypes were arriving in 1936, General Giffard LeQuesne Martel, a pioneer in tank design who had published works on armoured warfare and pioneered the lightly armoured "tankette" to enhance infantry mobility, became Assistant Director of Mechanization at the War Office.[3]

Later that year, Martel witnessed demonstrations of Soviet tank designs, including the BT tank, which had been influenced by American J. Walter Christie's work. Martel urged the adoption of the Christie suspension and Christie's practice of using a lightweight aircraft engine, such as the Liberty Engine. The government authorized the purchase and licensing of a Christie design via the Nuffield Organization, rather than contact the Soviet authorities.[4][5]

The vehicle obtained from Christie became the basis of the Cruiser Mk III (A13). It had to be extensively redesigned by Morris Commercial Cars as it was too small and had several faults that Christie had not addressed.[1][6] A new company Nuffield Mechanization & Aero Limited was formed for the development and production of the design.

At a meeting of the General Staff, an official specification was determined, which included 30 mm (1.2 in) armour, a 2-pounder gun and a road speed of 30 miles per hour (48 km/h). A subsequent review of the specification by Martel and Percy Hobart approved 30 mm armour all round provided cross-country speed could be kept at 25 miles per hour (40 km/h). Pending the delivery of the A13, an interim design was approved from the A7, A9 and A10, the A9 being selected.[7] Orders for the resulting Mk. I's were limited pending the arrival of the A13.

The first prototype (A13-E1) was delivered in 1937. Following the testing of two prototypes, the A13 was ordered into production. The original order was for 50 tanks and 65 had been built by mid 1939.[5] The Mk III weighed 14 long tons (14 t), had a crew of four, a 340 horsepower (250 kW) engine and a top speed of 30 miles per hour (48 km/h) and was armed with a 2 pounder gun and a machine-gun. When it was introduced into service in 1937, the army still lacked a formal tank division.[8]

Combat history

Like most British cruisers, the A13 was fast but under-armoured and mechanically unreliable. As part of the British Expeditionary Force sent to France, the Cruiser Mark III equipped units in the 1st Armoured Division but most were lost. A few were used in Greece and in the Western Desert 1940–1941 (Libya), where they equipped units of the 7th Armoured Division. The design was used as the basis for the Cruiser Mk IV.

See also

Cruiser Mark III A13 at The Tank Museum

Notes

  1. 1 2 3 4 5 6 White p45
  2. ↑ http://www.wwiivehicles.com/unitedkingdom/cruiser/mk-iii-a13.asp
  3. ↑ Milson
  4. ↑ Milsom p. 5
  5. 1 2 Tucker, Spencer (2004). Tanks: An Illustrated History of Their Impact. ABC-CLIO. pp. 49–51. ISBN 1-57607-995-3.
  6. ↑ Milson p. 7
  7. ↑ Milsom
  8. ↑ Steele, Brett D. (2005). Military Re-engineering Between the World Wars. RAND. p. 14. ISBN 0-8330-3721-8.

References

External links

Wikimedia Commons has media related to Cruiser tank Mk III.
This article is issued from Wikipedia - version of the Saturday, January 09, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.