Cumbres and Toltec Scenic Railroad

Cumbres & Toltec Scenic Railroad
Locale Conejos County and
Archuleta County
in Colorado and
Rio Arriba County
in New Mexico
Dates of operation 1970present
Track gauge 3 ft (914 mm)
Length 64 miles
Headquarters Chama, New Mexico
Website

cumbrestoltec.com

Denver & Rio Grande Railroad
San Juan Extension
Nearest city Antonito, Colorado and Chama, New Mexico
Coordinates 36°54′N 106°35′W / 36.900°N 106.583°W / 36.900; -106.583Coordinates: 36°54′N 106°35′W / 36.900°N 106.583°W / 36.900; -106.583
Built 1880
Architect Denver and Rio Grande Western Railroad
Baldwin Locomotive Works
Architectural style Late 19th And Early 20th Century American Movements
MPS Railroads in Colorado, 1858-1948 MPS
NRHP Reference # 73000462[1] (original)
07000374[1] (increase)
CSRHP # 5AA.664 / 5CN.65
Significant dates
Added to NRHP February 16, 1973
Boundary increase April 24, 2007
Designated NHLD October 16, 2012

The Cumbres & Toltec Scenic Railroad (C&TS) is a 3 ft (914 mm) narrow gauge heritage railroad running between Chama, New Mexico and Antonito, Colorado. It runs over 10,015 ft (3,053 m) Cumbres Pass and through Toltec Gorge, from which it takes its name. Trains operate from both endpoints and meet at the midpoint. Today, the railroad is the highest and longest narrow gauge steam railroad in the United States with a track length of 64 miles. The train traverses the border between Colorado and New Mexico, crossing back and forth between the two states 11 times. The Cumbres & Toltec Scenic Railroad has been jointly owned by the States of Colorado and New Mexico since 1970 when it was purchased from the Denver and Rio Grande Western Railway, saving it from the scrap yards. The Cumbres & Toltec Scenic Railroad received the Designation of a National Historic Landmark in 2012 by the United States National Park Service.

History

Construction

The railroad line was constructed in 1880-1881 by the Denver and Rio Grande Railroad as part of their San Juan Extension stretching from Alamosa, Colorado to Durango, Colorado. The line was constructed with 3 ft (914 mm) narrow gauge track to match the D&RGW's other lines. The line primarily supported mining operations in the San Juan mountains, mainly around Durango and Silverton. The longest and highest portion of the railroad, known as the Cumbres & Toltec Scenic Railroad, is 64 miles long and was constructed in 1880 in less than nine months; an engineering miracle even by today's standards, considering the work was all done by hand.

Today's Durango and Silverton Narrow Gauge Railroad was built in 1882 as a branch line off this main. By the late 1950s mining had dwindled substantially and the line was on the verge of abandonment, but an oil boom near Farmington, New Mexico created a traffic surge that kept the line operating for another decade hauling oil and pipe. By the late 1960s the traffic was virtually gone and abandonment was applied for. The states of Colorado and New Mexico purchased the 64 miles of San Juan Extension between Antonito, Colorado and Chama, New Mexico in 1970 and started operating the next year under the name of the Cumbres & Toltec Scenic Railroad.

The Cumbres & Toltec Scenic Railroad continues to operate daily between May and October of each year with five fully restored steam locomotives. The C&TSRR will have six fully restored engines when the D&RGW 168 locomotive, a 4-6-0, is moved from Colorado Springs, Colorado to Antonito, Colorado and restored to service. The #168 will then be the oldest and most authentic steam locomotive in the United States operating. The #168 was built in 1883 and is only one of two remaining of the original twelve locomotives built between 1883 and 1885 for the D&RG line. The other locomotive, #169, is on static display in Alamosa, Colorado, and is not operational.

Tourist operations

In 1970, the states of Colorado and New Mexico jointly purchased the portion of the line from Antonito, Colorado to Chama, New mexico, along with much of the equipment that operated on the line. This section is the most scenic portion of the line, and a part that loops back and forth between the two states. The Cumbres and Toltec Scenic Railroad Commission was created by an act of Congress as a bi-state entity to oversee the railroad.

Over the years the railroad has been operated by several operators under contract by the commission, including Scenic Railways (1970-1981), Kyle Railways (1982-1996), Cumbres and Toltec Scenic Corporation/George Bartholomew (1997-1999), Rio Grande Railroad Preservation Corporation (2000-2002), Cumbres and Toltec Scenic Management Corporation (2003-2011), American Heritage Railways (2012) and Cumbres and Toltec Operating LLC (2013-).

1999 operator change

The lease of operator Cumbres and Toltec Scenic Corporation (George Bartholomew) was terminated by commission due to a failure to maintain the railroad and its equipment properly, replenish used parts and making rent payments.[2] Rio Grande Railroad Preservation Corporation, formed by the Friends of the Cumbres and Toltec, assumed operations of the railroad a few months later.

2002 FRA shutdown

In spring 2002 the Federal Railroad Administration ordered the shutdown of the railroad until specific track bed issues were resolved.[3]

2002 forest fire shutdown

The railroad was closed for much of the summer of 2002 by the US Forest Service due to extremely dry conditions, forest fires across the region, and fears that the steam locomotives would cause fires.[3]

2010 trestle fire

On June 23, 2010, a brush fire severely damaged the Lobato Trestle, a long and high deck girder bridge. The railway trucked locomotive 484 and some coaches from Chama to Cumbres so that operations could continue on both sides of the break.[4]

On June 20, 2011, the Lobato Trestle was returned to service, and trains were once more traveling the full length of the railroad, from Chama, New Mexico to the summit of Cumbres Pass and beyond, all the way to Antonito, Colorado. This includes the daily lunch stop at Osier.

2012 operator change

In 2012 the Cumbres and Toltec signed a contract with American Heritage Railways to operate the railway; AHR also owns the Durango & Silverton Narrow Gauge Railroad and the Great Smoky Mountains Railroad, and used to be operator of the Texas State Railroad. AHR gave notice at the end of the 2012 season that it would withdraw as operator. The C&TS formed a special sub-entity, Cumbres & Toltec Operating LLC, to operate the railway after AHR pulled out. John Bush was hired as president of C&TS in December 2012.[5]

Tourist train ride

Trains depart each morning from both Chama, New Mexico and Antonito, Colorado. In peak season there are trains every day of the week in either direction. They meet at Osier, the midpoint of the line where lunch is provided. Passengers may continue on their train to the other end or switch trains to return to their original terminal. Through riders have the option of a motor coach return to their original terminal. All seats are reserved. Seats are sometimes available to walk-ups, but this is rare in peak season.

The railroad provides standard seats in coaches, or first class seats in a parlor car. A gondola with no seats is usually provided for standard or first class riders who prefer to ride in the open air after their ticket is taken. A concession car with snacks and gifts is on each train and bathrooms are available on the train.

All passenger trains are pulled by historic steam locomotives that originally worked on this line and others of the Denver and Rio Grande Western. Heavy trains out of Chama may have two locomotives as far as Cumbres Pass. East bound from Chama is the steepest portion so the steam engines tend to work hard and give off an acoustic and visual show. The remaining 3/4 of the eastbound trip is downgrade and the locomotives are fairly quiet. Westbound from Antonito, the grade is much less but the locomotives periodically work harder, especially on the last couple miles to Cumbres Pass.

The line passes through Rio Grande and Carson National Forests. Most of the line is bordered by rocky ledges, cliffs and formations of varying types. The train passes along the rim of Toltec Gorge, a spectacular, though brief highlight. Conifer and aspen trees dominate with periodic mountain meadows. The aspen trees turn a brilliant yellow in the fall making those trips popular. The easternmost quarter shifts to scrubby and arid rolling hills. There are numerous restored historic structures along the line, including two tunnels, bridges, section houses and water tanks.

Car and train charters are available. Extensive historic equipment is available for chartering.

There are typically four full-length excursion options:

and two reduced-length excursion options:

Full-length adult fare is $99 for Coach class, $129 for Tourist class, and $169 for Parlor class. One child may ride free with the purchase of a full-price adult ticket; fares for each additional child start at $49. A 5% "Historic Preservation Fee" is added to all fares. All fares include a buffet lunch at Osier Station.[6]

Historic significance

The Cumbres and Toltec is highly regarded by both railfans and historians due to its relative authenticity and surviving historic fabric. Chama houses one of the most physically complete railroad yards from the steam era in the US. Although portions of the roundhouse, warehouses, and parking lots have been changed, the railroad yard has the ambiance of pre-1960 railroad operations. The yard tracks contain authentic rolling stock and structures of the Denver and Rio Grande indigenous to the railroad line.

All the steam locomotives at the C&TS were built for and operated their entire careers for the Denver and Rio Grande Western. All 2-8-2 Mikados, these range from the relatively small K-27 "Mudhen", #463, once owned by Gene Autry, to the large K-37s, originally built as standard gauge locomotives. The mainstays are the venerableD&RGW K-36 fleet, produced by Baldwin Locomotive Works in 1925. The only two Surviving D&RGW rotary snowplows are onsite and both have operated for the C&TS.

As the Denver & Rio Grande Railroad San Juan Extension, the railway was listed on the National Register of Historic Places in 1973. The boundaries of the NRHP listed area were increased in 2007.[1]

The railroad was featured extensively in the 1969 film The Good Guys and the Bad Guys, and was used in the opening sequence of Indiana Jones and the Last Crusade. The 2014 film A Million Ways to Die in the West also featured this railroad.

Railroad operations

The C&TS is 64 miles (103 km) in length with numerous siding and yards. There are turning wyes at Chama, Cumbres and Bighorn, turning loops at Osier and Antonito and a crossover at Lava. While headquartered in Chama, the railroad splits most of its functions between the termini of the railroad. The Cumbres and Toltec Commission offices and the railroad's main car shop (where repairs to rolling stock are performed) are at Antonito. The center of operations for the railroad is Chama, the site of the locomotive repair shop and the location of most of the historic equipment.

Line description

Cumbres and Toltec Scenic Railroad

Legend
to Alamosa (San Luis and Rio Grande Railroad)
280.70 Antonito
306.6 Sublette
311.3 Mud Tunnel
315.2 Rock Tunnel
318.4 Osier
320 Cascade Creek trestle
330.48 Cumbres
339.7 Lobato trestle

344.12 Chama
to Durango (Durango and Silverton Narrow Gauge Railroad)

Locations along the line

Chama to Osier

Beginning in Chama (Milepost 344.12), the railroad makes a nearly straight shot northeast after leaving the yard and crossing the Rio Chama. About a mile later begins a 4% grade which is nearly constant from there to Cumbres. with the exception of a stretch at Coxo. The first siding on the line is located at Lobato (MP: 339.99), located here are the remnants of a stock pen, and a water tank made for a movie in the 1970s. The tank was used later in Indiana Jones and the Last Crusade. The water tank was knocked over in 2006, due to age and high winds. Just under a quarter of a mile away, is Lobato Trestle, the second highest trestle on the line, built in 1883. Due to weight restrictions, only one locomotive at a time is allowed to cross; therefore, all double-headers must separate, and rejoin on the other side. On June 23, 2010, a big fire of unknown origin burned the Loboto Trestle destroying the wooden deck and railroad crossties. This fire also caused irreparable damage to the bridge's steel spans, requiring their replacement. Trains departed Cumbres instead of Chama for the rest of the 2010 season. Work to replace the bridge spans began in March 2011 and was finished in June 2011. The first passenger train over the bridge occurred on the morning on June 18, 2011.

C&TS #487 in the Chama Yard

From here to Cumbres, the railroad operates on the north side of Wolf Creek. On the journey to the top at Cumbres, the train passes Cresco Siding and water tank (MP 335.10) and navigates a small canyon past Hamilton's Point. Exiting the canyon, the track makes a turn to the northwest and up the Wolf Creek drainage through Coxo. At a narrow point of the valley, the track makes a horseshoe turn up to Windy Point, which the train rounds to enter Cumbres Pass.

At Cumbres (MP 330.48), elevation 10,015 ft (3,053 m), is the Car Inspector's House, Water Standpipe, remnants of the extensive snow shed, and the Section House, which replaced the original depot after it was demolished in the 1950s. Cumbres is the highest point on the railroad. From here east, the track heads down at 2.5%, and descends the Cumbres Loop, more commonly refer to as "Tanglefoot Curve". After exiting the loop, the track follows a general easterly direction until Milepost 327.6, where they turn north up the Los Pinos Valley.

Heading north, the track loses elevation, while the valley slopes up, with the track and valley floor finally meeting at Mile 325, where the track once again changes direction, heading south on the other side of the valley, following the Rio de Los Pinos toward Osier. After Mile 323, the track again leaves the valley, on a much steeper grade, while the track clings to the valley created by the river. Along the way, the track crosses Cascade Trestle (MP 319.95), taller than the Lobato Trestle, at 137 ft (42 m). Approximately a mile and a half later, the track enters Osier, Colorado, the midpoint of the railroad where the two trains meet for lunch. Here, riders may switch trains and return to their point of origin, or ride to the opposing terminus.

Antonito to Osier

C&TS steam locomotive #484

This section covers the eastern portion of the line from the small cattle and junction town of Antonito to Osier, the midpoint of the line.

Antonito (MP 280.70) is a small company town of the former railroad main line. It is home to the C&TS car shop, a water tank, and other relics. Most of the facilities were built by the Cumbres & Toltec, as the original rail yard, wye, and station were not sold to the states of Colorado and New Mexico.

Shortly after leaving the station, the train heads straight for 3 miles (4.8 km), until coming into some hills. Shortly thereafter, the train crosses Ferguson's Trestle (MP 285.87), named for a man who was hung from a locomotive there. The original trestle was featured in the 1988 TV movie Where The Hell's That Gold? starring Willie Nelson and Delta Burke. In filming, a planned explosion ended up getting out of hand and the bridge was burned down. Traffic was halted for a week while the C&TS built a temporary bridge; the following winter it rebuilt the trestle to match the original. About three miles (5 km) later, the train makes the first of 11 crossings into New Mexico, and climbs a ledge up to a lava mesa. Lava (291.55) has the old water tank from Antonito which was moved here in 1971. The track goes around a horseshoe curve which is also used as a reversing loop to turn the rotary snow plow trains from Chama. The Cumbres and Toltec has two rotary snowplows, Rotary OM and Rotary OY.

Heading west, the track rounds Whiplash Curve, a double horseshoe curve. About a mile from Whiplash Curve lie the sidings and wye at Big Horn. Past Big Horn the train loops around the sides of mountains going through horseshoe curves before reaching the first water stop at Sublette.

Sublette is an abandoned railroad section camp, consisting of a log bunk house, a section house, a siding, and other buildings. There used to be a water tank at the western end of the siding, but today, in its place, is a standpipe. After filling the tender with water, the engine and the train slowly creep into lush aspen groves.

After departing Sublette comes Toltec Siding, which in the 50's was the meeting place of long oil well pipe trains moving between Chama and Farmington to Alamosa. Shortly afterwords, trains pass through Mud Tunnel, which is unique because it is lined with wooden pillars since it is bored through soft volcanic ash. When the beams in the tunnel collapsed, the D&RGW made a "shoo fly" around the tunnel to allow passengers and small cars to be moved around the tunnel to an awaiting train. After passing through this, trains pass around Phantom Curve and through Calico Cut, and then the trains slow down as they enter the longer Rock Tunnel. Trains exit the tunnel, entering the Toltec Gorge, where the track is 600 ft (180 m) above the river. The line follows the river the remainder of the distance to Osier.

See also

References

  1. 1 2 3 Staff (2008-04-15). "National Register Information System". National Register of Historic Places. National Park Service.
  2. "Former Cape rail owner loses N.M. contract - Local News - capecodtimes.com - Hyannis, MA". Capecodonline.com. Retrieved 2015-05-01.
  3. 1 2 "Colorado Central Magazine - The monthly magazine for the illuminated - Cumbres & Toltec will steam on this summer". Cozine.com. 2003-06-01. Retrieved 2015-05-01.
  4. "Bridge Fire Severs Route". Railfan & Railroad. September 2010.
  5. Archived March 6, 2013, at the Wayback Machine.
  6. "Schedule & Fares". Cumbres & Toltec Scenic Railroad. Retrieved 8 May 2013.

External links

Wikimedia Commons has media related to Cumbres and Toltec Scenic Railroad.
This article is issued from Wikipedia - version of the Tuesday, March 22, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.