DX encoding

DX (Digital indeX) encoding is an ANSI and I3A standard, originally introduced by Kodak in March 1983, for marking 135 and APS photographic film and film cartridges. It has several parts, a latent image DX film edge barcode on the film below the sprocket holes, a code on the cartridge used by automatic cameras, and a barcode on the cartridge read by photo-finishing machines.

DX cartridge barcode

Next to the film exit lip is an Interleaved 2 of 5 barcode and a printed number. The 6 digits represent the I3A assigned DX number (middle 4 digits), the number of exposures (last digit) and a proprietary manufacturer's code (first digit). The DX number identifies the manufacturer, film type, and by inference, the necessary developing process type. This is used by automatic photo-finishing machines to correctly process the exposed film. (Kodak US patent 4965628)

DX film edge barcode

DX film edge barcode

Below the sprockets under each frame of 135 film is the DX film edge barcode. The barcode is invisible until the film has been developed. It is optically imprinted as a latent image during manufacturing. They are used by photo finishers to identify and align each frame for printing. It consists of two parallel linear barcodes, one for a synchronizing clock, and the other encoding film data such as type, manufacturer and frame number.(Kodak US patent 4965628)

DX Camera Auto Sensing

The outside of film cartridges are marked with a DX Camera Auto Sensing (CAS) code readable by many cameras. Cameras can then automatically determine the film speed, number of exposures and exposure tolerance. The first cameras to use the technology are said to be the Konica TC-X SLR and Pentax Super Sport 35 (PC 35AF-M)[1] in 1984.

The DX Camera Auto Sensing code takes the form of a grid of contact points on the side of the metal cartridge surface that are either conductive or non-conductive. Electrical contacts in the camera read the bit pattern. Most cameras read only part of the code; typically, only the film speed is read, and some cameras aimed at the consumer market only read enough bits to tell apart the most common film speeds. For example, 100, 200, 400, and 800 can be detected by reading only S1 and S2 and ground.

Electrical contacts

On 35mm film cartridges there are two rows of six rectangular areas. The two left-most areas (with the spool post on the left) are both common (ground) and are thus always bare metal. The remaining five bits in the top row represent 32 possible film speeds. But only the 24 speeds representing the 1/3 stops from ISO 25/15° to 5000/38° are used. The codes are not in strict binary order.

In the second row, the first three bits represent eight possible film lengths, although in practice only 12, 20, 24 and 36 exposures are encoded. The remaining two bits of the second row give four ranges of exposure tolerance, or latitude.

Most cameras read the film speed only (first row).

Diagramatically (with spool post to the left):

G S1 S2 S3 S4 S5
G L1 L2 L3 T1 T2

Where "G" are the two common-ground contacts, "S" is the film speed, "L" the film length, and "T" the exposure tolerance.

Reading DX codes

Speed
ISO speed 1st row DX contacts
25/15°                  
32/16°                  
40/17°                  
50/18°                  
64/19°                  
80/20°                  
100/21°                  
125/22°                  
160/23°                  
200/24°                  
250/25°                  
320/26°                  
400/27°                  
500/28°                  
640/29°                  
800/30°                  
1000/31°                  
1250/32°                  
1600/33°                  
2000/34°                  
2500/35°                  
3200/36°                  
4000/37°                  
5000/38°                  
custom 1                  
custom 2                  
custom 3                  
custom 4                  
custom 5                  
custom 6                  
custom 7                  
custom 8                  
Film length
Exposures 2nd row DX contacts
other                  
12                  
20                  
24                  
36                  
48                  
60                  
72                  
Exposure tolerance
Exposure tolerance
(in f-stops)
2nd row DX contacts
±½                  
±1                  
+2 −1                  
+3 −1                  

See also

References

  1. "History of Innovations". Pentax. Retrieved 21 July 2011. 1984: Pentax introduces its second leaf-shutter sport model, the Super Sport 35 (PC 35AF-M). The new addition offers all of the features of the Sport 35, plus a built-in auto winder, fully automatic loading and automatic film speed setting using the Kodak-pioneered DX coding system. The Super Sport 35 is the world's first non SLR camera to incorporate the DX film sensing system.

External links

This article is issued from Wikipedia - version of the Wednesday, February 10, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.