Diethyl dithiophosphoric acid

Diethyl dithiophosphoric acid
Names
IUPAC name
Diethoxy-sulfanyl-sulfanylidene-λ5-phosphane
Other names
O,O-Diethyl dithiophosphoric acid; Diethyl dithiophosphate; Diethyl phosphorodithioate; Diethyl ester of phosphorodithioic acid
Identifiers
298-06-6
ChemSpider 8917
Jmol interactive 3D Image
PubChem 9274
Properties
C4H11O2PS2
Molar mass 186.22 g·mol−1
Appearance colorless liquid
Melting point < 0 °C (32 °F; 273 K)
Boiling point 66 °C (151 °F; 339 K) at 1 mmHg
Hazards
Flammable (F)
Toxic (T)
Corrosive (C)
R-phrases R23/24/25 R34 R41
S-phrases S23 S26 S36/37/39 S45
NFPA 704
Flammability code 2: Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur. Flash point between 38 and 93 °C (100 and 200 °F). E.g., diesel fuel Health code 3: Short exposure could cause serious temporary or residual injury. E.g., chlorine gas Reactivity code 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g., calcium Special hazards (white): no codeNFPA 704 four-colored diamond
2
3
1
Flash point 82 °C (180 °F; 355 K)
538 °C (1,000 °F; 811 K)
Lethal dose or concentration (LD, LC):
500 mg/kg (rabbit, dermal)
4510 mg/kg (rat, oral)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Diethyl dithiophosphoric acid, sometimes mistakenly called diethyl dithiophosphate, is the organophosphorus compound with the formula (C2H5O)2PS2H. It is the processor for production of the organophosphate insecticide Terbufos. Although samples can appear dark, it is a colorless liquid.[1]

It is prepared by treating phosphorus pentasulfide with ethanol:[2]

P2S5 + 4 C2H5OH → 2 (C2H5O)2PS2H + H2S

Reactions

Diethyl- and dimethyl dithiophosphoric acids react with bases. The results of this neutralization reaction are salts, e.g., ammonium diethyl dithiophosphate.[3]

Diethyl dithiophosphoric acid reacts with zinc oxide to give zinc dialkyldithiophosphate, which is used as an oil additive:[4]

ZnO + 2 (C2H5O)2PS2H → [ (C2H5O)2PS2]2Zn + H2O
Structure of zinc dialkyldithiophosphate, an oil additive.

References

  1. ↑ J. Svara, N. Weferling, T. Hofmann "Phosphorus Compounds, Organic" in Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim, 2006. doi:10.1002/14356007.a19_545.pub2
  2. ↑ Lefferts, J. L.; Molloy, K. C.; Zuckerman, J. J.; Haiduc, I.; Guta, C.; Ruse, D., "Oxy and Thio Phosphorus Acid Derivatives of Tin. 1. Triorganotin(IV) Dithiophosphate Esters", Inorganic Chemistry 1980, volume 19, 1662-1670. doi:10.1021/ic50208a046
  3. ↑ Okuniewski, Andrzej; Becker, Barbara (2011). "Ammonium O,O′-diethyl dithiophosphate". Acta Crystallogr. E 67 (7): o1749–o1750. doi:10.1107/S1600536811022811.
  4. ↑ H. Spikes "The history and mechanisms of ZDDP" Tribology Letters, Vol. 17, No. 3, October 2004. doi:10.1023/B:TRIL.0000044495.26882.b5.
This article is issued from Wikipedia - version of the Sunday, February 14, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.