Dimethyl ether
| |||
| Names | |||
|---|---|---|---|
| Systematic IUPAC name
Methoxymethane[1] | |||
| Other names
Demeon Dimethyl oxide | |||
| Identifiers | |||
115-10-6  | |||
| Abbreviations | DME | ||
| 1730743 | |||
| ChEBI | CHEBI:28887 | ||
| ChEMBL | ChEMBL119178 | ||
| ChemSpider | 7956 | ||
| EC Number | 204-065-8 | ||
| Jmol 3D model | Interactive image | ||
| KEGG | C11144 | ||
| MeSH | Dimethyl+ether | ||
| PubChem | 8254 | ||
| RTECS number | PM4780000 | ||
| UNII | AM13FS69BX | ||
| UN number | 1033 | ||
| |||
| |||
| Properties | |||
| C2H6O | |||
| Molar mass | 46.07 g·mol−1 | ||
| Appearance | Colorless gas | ||
| Odor | Typical | ||
| Density | 2.1146 kg/m3 (gas, 0 °C, 1013 mbar)[2] 0.735 g/mL (liquid, -25 °C)[2] | ||
| Melting point | −141 °C; −222 °F; 132 K | ||
| Boiling point | −24 °C; −11 °F; 249 K | ||
| 71 g dm−3 (at 20 °C (68 °F)) | |||
| log P | 0.022 | ||
| Vapor pressure | >100 kPa | ||
| 1.30 D | |||
| Thermochemistry | |||
| 65.57 J K−1 mol−1 | |||
| Std enthalpy of formation (ΔfH |
−184.1 kJ mol−1 | ||
| Std enthalpy of combustion (ΔcH |
−1.4604 MJ mol−1 | ||
| Hazards | |||
| Safety data sheet | See: data page Oxford MSDS | ||
| GHS pictograms |  | ||
| GHS signal word | Danger | ||
| H220 | |||
| P210, P410+403 | |||
| EU classification (DSD) |
 F+ | ||
| R-phrases | R12 | ||
| S-phrases | (S2), S9, S16, S33 | ||
| NFPA 704 | |||
| Flash point | −41 °C (−42 °F; 232 K) | ||
| 350 °C (662 °F; 623 K) | |||
| Explosive limits | 27% | ||
| Related compounds | |||
| Related ethers |
Diethyl ether | ||
| Related compounds |
Ethanol | ||
| Supplementary data page | |||
| Refractive index (n), Dielectric constant (εr), etc. | |||
| Thermodynamic data |
Phase behaviour solid–liquid–gas | ||
| UV, IR, NMR, MS | |||
verify (what is  ?) | |||
| Infobox references | |||
Dimethyl ether (DME), also known as methoxymethane, is the organic compound with the formula CH3OCH3, simplified to C2H6O. The simplest ether, it is a colorless gas that is a useful precursor to other organic compounds and an aerosol propellant and is being studied as a future energy option. It is an isomer of ethanol.
Production
Approximately 50,000 tons were produced in 1985 in Western Europe by dehydration of methanol:[3]
- 2 CH3OH → (CH3)2O + H2O
The required methanol is obtained from synthesis gas (syngas).[4] In principle, the methanol could be obtained from organic waste or biomass. Other possible improvements call for a dual catalyst system that permits both methanol synthesis and dehydration in the same process unit, with no methanol isolation and purification.[4][5]
Both the one-step and two-step processes above are commercially available. Currently, there is more widespread application of the two-step process since it is relatively simple and start-up costs are relatively low. There is also a one-step liquid-phase process in development.[4][6]
Applications
The largest use of dimethyl ether is as the feedstock for the production of the methylating agent, dimethyl sulfate, which entails its reaction with sulfur trioxide:
- CH
3OCH
3 + SO
3 → (CH
3)
2SO
4
This application consumes several thousand tons of dimethyl ether annually.
Dimethyl ether can also be converted into acetic acid using carbonylation technology related to the Monsanto acetic acid process:[3]
- (CH
3)
2O + 2 CO + H2O → 2 CH3COOH
Laboratory reagent and solvent
Dimethyl ether is a low-temperature solvent and extraction agent, applicable to specialised laboratory procedures. Its usefulness is limited by its low boiling point (−23 °C (−9 °F)), but the same property facilitates its removal from reaction mixtures. Dimethyl ether is the precursor to the useful alkylating agent, trimethyloxonium tetrafluoroborate.[7]
Niche applications
A mixture of dimethyl ether and propane is used in an over-the-counter device to treat warts, by freezing them.[8][9]
Dimethyl ether is the main constituent of "freeze spray", a spot-coolant used in field testing of electronic components.[10] In this role it has supplanted halocarbon compounds (Freon), which have been suspected of contributing to ozone depletion in the Earth's atmosphere.
Dimethyl ether is also a component of certain high temperature "MAP-plus" blowtorch gas blends, supplanting the use of methyl acetylene and propadiene mixtures.[11]
Research
Fuel
A potentially major use of dimethyl ether is as substitute for propane in LPG used as fuel in household and industry.[12]
It is also a promising fuel in diesel engines,[13] petrol engines (30% DME / 70% LPG), and gas turbines. For diesel engines, an advantage is the high cetane number of 55, compared to that of diesel fuel from petroleum, which is 40–53.[14] Only moderate modifications are needed to convert a diesel engine to burn dimethyl ether. The simplicity of this short carbon chain compound leads during combustion to very low emissions of particulate matter, NOx, and CO. For these reasons as well as being sulfur-free, dimethyl ether meets even the most stringent emission regulations in Europe (EURO5), U.S. (U.S. 2010), and Japan (2009 Japan).[15] Mobil uses dimethyl ether in their methanol to gasoline process.
Dimethyl ether is being developed as a synthetic second generation biofuel (BioDME), which can be manufactured from lignocellulosic biomass.[16] Currently the EU is considering BioDME in its potential biofuel mix in 2030;[17] the Volvo Group is the coordinator for the European Community Seventh Framework Programme project BioDME[18][19] where Chemrec's BioDME pilot plant based on black liquor gasification is nearing completion in Piteå, Sweden.[20]
In 2009 a team of university students from Denmark won the Urban Concept/Internal Combustion class at the European Shell Eco Marathon (The Shell Eco Marathon is an unofficial World Championship for mileage) with a vehicle running on 100% dimethyl ether. The vehicle drove 589 km/liter, fuel equivalent to gasoline with a 50 cc 2-stroke Diesel engine. As well as winning they beat the old standing record of 306 km/liter, set by the same team in 2007.[21]
Processes
The image below illustrates some of processes from various raw materials to dimethyl ether.
Refrigerant
Dimethyl ether is considered a refrigerant with ASHRAE refrigerant designation R-E170. Dimethyl ether is also used in refrigerant blends with e.g. ammonia, carbon dioxide, butane and propene.[22]
Safety
Unlike other alkyl ethers, dimethyl ether resists autoxidation. Dimethyl ether is also relatively non-toxic, although it is highly flammable.
References
- ↑ "dimethyl ether - PubChem Public Chemical Database". The PubChem Project. USA: National Center for Biotechnology Information.
- 1 2 Record in the GESTIS Substance Database of the IFA
- 1 2 Manfred Müller, Ute Hübsch, “Dimethyl Ether” in Ullmann’s Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim, 2005. doi:10.1002/14356007.a08_541
- 1 2 3 Dimethyl Ether Technology and Markets 07/08-S3 Report, ChemSystems, December 2008.
- ↑ P.S. Sai Prasad et al., Fuel Processing Technology, 2008, 89, 1281.
- ↑ Air Products Technology Offerings
- ↑ T. J. Curphey (1988). "Trimethyloxonium tetrafluoroborate". Org. Synth.; Coll. Vol. 6, p. 1019
- ↑ "A Pharmacist's Guide to OTC Therapy: OTC Treatments for Warts". July 2006.
- ↑ http://www.fda.gov/cdrh/pdf3/K030838.pdf
- ↑ http://www.electrolube.com/products/msds/044FRE.pdf
- ↑ http://images.toolbank.com/downloads/cossh/0482.pdf
- ↑ IDA Fact Sheet DME/LPG Blends 2010 v1
- ↑ nycomb.se, Nycomb Chemicals company
- ↑ http://www.topsoe.com/site.nsf/all/BBNN-5PNJ3F?OpenDocument topsoe.com
- ↑ http://www.japantransport.com/conferences/2006/03/dme_detailed_information.pdf, Conference on the Development and Promotion of Environmentally Friendly Heavy Duty Vehicles such as DME Trucks, Washington DC, March 17, 2006
- ↑ http://www.biodme.eu/
- ↑ Biofuels in the European Union, 2006
- ↑ http://www.volvo.com/group/global/en-gb/newsmedia/pressreleases/NewsItemPage.htm?channelId=2184&ItemID=47984&sl=en-gb
- ↑ http://www.volvo.com/group/global/en-gb/volvo+group/ourvalues/environment/renewable_fuels/biodme/biodme.htm
- ↑ Chemrec press release September 9, 2010
- ↑ The Danish Ecocar Team - List of achievements
- ↑ http://www.ashrae.org/technology/page/1933#et ASHRAE list of refrigerants
http://docs.lib.purdue.edu/cgi/viewcontent.cgi?article=1955&context=iracc
http://www.eurammon.com/sites/default/files/attachments/eurammon12engl.pdf
External links
|