Electronika BK

Electronika BK
Type Home computer
Release date 1984 (1984)
Discontinued 1993
Operating system FOCAL (programming language), Vilnius BASIC (ROM embedded), OS BK-11, ANDOS etc.
CPU K1801VM1 @3MHz (BK-0010), @4.6MHz (BK-0011), @4MHz (BK-0011M)
Memory 32KiB

The Electronika BK was a series of 16-bit PDP-11-compatible Soviet home computers developed by NPO Scientific Center, the leading Soviet microcomputer design team at the time. It was also responsible for the more powerful UKNC and DVK micros. First released in 1984 (developed in 1983), they were based on the К1801ВМ1 (Soviet LSI-11-compatible CPU) and were the only "official"[1] Soviet home computer design in mass production.

They sold for about 600-650 rubles. This was expensive,[2] but marginally affordable, so they became one of the most popular home computer models in the Soviet Union despite numerous problems. Later, in 90s, their powerful CPU and straightforward, easy to program design made them popular as demo machines. BK (БК) is a Russian abbreviation which stands for "Бытовой Компьютер"—domestic (or home) computer. It was also for a short time used as cash register, for example, in the State Universal Store.

Although BK-0010 was one of the cheapest Soviet PC and in speed (as well as memory, graphics, and so on) differed little from the simple 8-bit models, this PC was formally the first or one of the first fully 16-bit home computers in the world (in contrast to the TI-99/4A, BK had not only a 16-bit processor, but also the ROM, RAM and controllers with the same width).

Software

Vilnius BASIC on a BK-0010.01

Although the BK series was included in a governmental economic plan, customer support apparently was not, as it was essentially a barebones machine, without any peripherals or development tools. The only software available at the launch (except ROM firmware) was an included magnetic tape with several programming examples (both for BASIC and FOCAL), and several tests. The ROM firmware included a simple program to enter machine codes, BASIC and FOCAL interpreters.

While the BK was somewhat compatible with larger and more expensive DVK professional model microcomputers and industrial minicomputers like the SM EVM series, its meager 32 KB memory of which only 16 KB was generally available to programmers (an extended memory mode supported 28 KB but limited video output to a quarter of the screen) generally precluded direct use of software for the more powerful machines. Nevertheless, the DVK became a popular development platform for BK software, and when the BK memory was later extended to 128 KB, most DVK software could be used directly with minimal changes.

Homebrew developers quickly filled this niche, porting several development tools from DVK and UKNC. This led to an explosion of homebrew software, from Text editors and databases to operating systems and games. Most BK owners expanded the built-in RAM to at least 64 KB, which not only allowed easier software porting from more "grownup" systems, but as these upgrades often included floppy drive controllers, creating a one's own disk operating system became something of a competitive sport in the BK scene. Games and demo communities also flourished, as its anemic graphics were offset by a powerful CPU.

One of the operating systems was ANDOS, although officially the computer was shipped with OS BK-11, a modification of RT-11.

Hardware

The machine was based on a powerful (for the time) 16-bit single-chip K1801VM1 CPU, clocked generally at 3 MHz.[3] It was almost perfectly compatible with Digital Equipment Corporation's LSI-11 line, though it lacked EIS and further command set extensions. The manufacturer also closely copied the PDP-11's internal architecture. Each model had one free card slot which was electrically, but not mechanically, compatible with Q-Bus. The first versions had 32 KB onboard DRAM, half of which was used as video memory. That was extended to 128 KB in later models, with video memory extended to two 16 KB pages.

Video output on all models was provided by the K1801VP1-037 VDC, a rather spartan chip. It was actually a standard 600-gate ULA with a VDC program that allowed for two graphic video modes, high-res (512x256, monochrome) and low-res (256x256, 4 colors), and supported hardware vertical scrolling. Later models had 16 hardwired 4-color sets selectable from 64 color palette. It didn't support text modes, but simulated two via BIOS routines: 32x25 and 64x25. Some operating systems such as ANDOS managed to output text in 80x25 mode when displaying documents imported from IBM PC, by placing characters more densely. Output was through two separate 5-pin DIN connectors for a monochrome TV or color TV/monitor. Sound on all models was initially through a simple programmable counter connected to an onboard piezo speaker. Later, the General Instrument AY-3-8910 became a popular aftermarket addition.

All models also had a 16-bit universal parallel port with separate input and output buses for connecting peripherals such as printers (Eastern Bloc printers used the incompatible ИРПР interface instead of the more popular Centronics port, so Centronics printers needed an adapter), mice or Covox DACs for sound output, and tape recorder port for data storage. Later models included a manufacturer-supplied floppy drive controller (that could be plugged into a Q-Bus slot) by default. It was available for earlier models as an aftermarket part, but homebrew ones (that also often extended rather anemic 16K memory of original BK) were more popular. A cottage industry for such peripherals and mods flourished.

Versions

BK0010-01 System Board

Electronika BK-0010

Электроника БК-0010 was the first model (originally released in 1983, the serial production since mid-1984). It had a pseudo-membrane keyboard (an array of mechanical microswitches without keycaps, covered by flexible overlay), 32 KiB RAM, 8 KiB ROM with BIOS (chip K1801RE2-017), 8 KiB ROM with FOCAL interpreter (K1801RE2-018), 8 KiB ROM with debugger (K1801RE2-019) and one free ROM slot, and its CPU was clocked at 3 MHz. A tape recorder was used for data storage in the factory configuration.

This model was criticized for its uncomfortable keyboard—while mechanical in nature, lack of keycaps lead to the same unsatisfactory tactile response, that was seen as unacceptable when the machine was used in home or educational settings, although such keyboard could be easily sealed completely, so this version found widespread use as an industrial controller. Other points of criticism included the archaic FOCAL programming language supplied by default, and the complete lack of peripherals and software. While all hardware was well documented and easy to work with, the machine was delivered without any programming tools.

Electronika BK-0010.01

The follow-up version, БК-0010.01 (sometimes referred to as -0010-01) was essentially the same machine, but with a conventional full-travel keyboard and a Vilnius BASIC p-code compiler in the ROM, correcting the weakest points of its predecessor. While the BASIC dialect used was quite powerful and well-optimized (it was actually a somewhat scaled-down clone of MSX BASIC), the keyboard was a mixed blessing. While it was much more comfortable to work with, its quality left much to be desired, and the keys were prone to sticking, significant bounce and wore quickly, though a model with a further improved keyboard became available later. The FOCAL interpreter was not dropped, but instead shipped on an external ROM cartridge that could be inserted into the Q-Bus slot.

Electronika BK-0010Sh

Электроника БК-0010Ш was a model intended specially for school use. It could be either the −0010 or −0010.01 model, but was supplied with a special current loop network adapter rated at 19200 bps, which could be inserted into the Q-Bus slot. Based on ULA chip K1801VP1-035 (and later on K1801VP1-065), the adapter was compatible to DEC DL-11 and KL-11 serial interfaces, but without modem control bits. It also included a monitor (usually a modified Yunost' compact TV), since in school setting it couldn't be expected to be connected to household TV.

Electronika BK-0011

BK-0011 was released in 1989. It had 128 KB of RAM divided into 16 KB pages, its CPU was clocked at 4 MHz by default; it included a newer version of BASIC in ROM and 16 selectable video palettes, which were almost universally criticized by users for their odd color combinations. It had a floppy controller, but the drive was still sold separately.

Electronika BK-0011M

BK 0011M

Some changes in the BK-0011, while minor, made it incompatible with earlier -0010 models. In particular, it couldn't load 0010 programs from a cassette tape. Even if it could have loaded them, crucial subsystems, such as sound, were still incompatible. Public outcry forced the manufacturer to redesign the machine, restoring compatibility with earlier models. The resulting model, the BK-0011M, quickly went into production, and most BK-0011 series computers were actually BK-0011Ms. Since the modifications were minor, most of the handful of -0011 models that made it to market were upgraded to -0011M models by enthusiasts.

Mods

It was not uncommon among owners to install one or two mechanical switches that made using the computer more convenient. Some of the common mods were:

These modifications were relatively simple and could be carried out by users who knew how to handle a soldering iron. Most of the people in the cottage industry of selling programs could also do the mods for a small fee. Enthusiasts also managed to connect more advanced devices to BK series computers. They developed a hard disk controller, and 2.5" HDDs were successfully used with BK computers. Other popular enhancements were AY-3-8912 sound chips and Covox Speech Thing.

Emulators

There are various software emulators of BK for modern IBM PC compatible computers. An emulator is able to run at a much higher speed than the original BK.

There are also fairly complete re-implementations of the BK for FPGA-based systems, such as the MiST.[4]

See also

References

  1. Government approved and accounted for in economic planning
  2. The average Soviet wage was about 150 rubles per month at the time.
  3. It was relatively easy to overclock the CPU, but slow DRAM made overclocking difficult. The most popular "turbo" speed was 5 MHz.
  4. "BK0011M (USSR retro home computer) core for MiST board". 2016-03-29. Retrieved 2016-04-16.

External links

This article is issued from Wikipedia - version of the Saturday, April 16, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.