HMS Viper (1865)

A contemporary cut away diagram of Viper
History
United Kingdom
Name: HMS Viper
Ordered: 22 March 1864[1]
Builder: J & W Dudgeon, Cubitt Town, London[1]
Cost: £51,127[1]
Laid down: 1864
Launched: 21 December 1865[2]
Commissioned: 1866
Fate:
  • Harbour service 1890
  • Tank vessel 1901
  • Sold at Bermuda 1908[1][3]
General characteristics
Displacement: 1,228 tonnes[2]
Tons burthen: 737 bm
Length: 160 ft (49 m) pp
Beam: 32 ft (9.8 m)[1]
Draught: 11 ft (3.4 m)[1]
Installed power: 696 ihp (519 kW)
Propulsion:
  • Two 2-cylinder horizontal single-expansion steam engines by Maudslay, Sons & Field
  • Twin screws
Sail plan: Barquentine rig (removed 1873)
Speed: 9.5 kn (17.6 km/h)[3]
Complement: 80
Armament:
Armour: 4.5 in (11 cm) iron belt and bulkheads with 10 in (25 cm) of teak backing
For other ships of the same name, see HMS Viper.

HMS Viper was an armoured iron gunboat, the only ship of her class, and the fourteenth ship of the Royal Navy to bear the name.

Design

Designed by the Admiralty, Viper was a half-sister to Vixen and Waterwitch, and all three were built mostly as experimental vessels. While Viper and Vixen were twin screw vessels, Waterwitch had a water-pump propulsion system. Vixen was almost identical to Viper, but was of composite construction.

Hull

Viper was an armoured gunboat of the breastwork type. Her hull was of iron construction, with 10 in (25 cm) of teak backing.[1] Vertical trunks were provided at the stern to lift the screws clear of the hull, thereby allowing a better hull-form for purely wind-driven sailing.

Propulsion

She was equipped with two sets of 4-cylinder horizontal single-expansion steam engines, each set powering one of her two-bladed, 9 ft diameter Maudslay & Griffiths screws.[3] In total she developed an indicated 696 horsepower, sufficient for a top speed of 9.5 knots (17.6 km/h).[1] Steam was provided by two Maudslay iron fire-tube boilers with six furnaces.[3]

Sail plan

She was equipped with a barquentine rig, but in 1873 all masts, rigging and upper deck obstructions were removed after the decision for Vixen and Viper to remain permanently in Bermuda.

Armament

Viper was armed with two 7-inch (6½-ton) muzzle-loading rifled guns and two 20-pounder breech-loading rifled guns.[1] One of Vixen or Viper's 7-inch guns was displayed on the waterfront at St Georges as recently as 1991.[3]

Construction

Viper was ordered from J & W Dudgeon of Cubitt Town on 22 March 1864[1] and laid down the same year. She was launched on 21 December 1865 and commissioned in 1867 for comparative trials. Her total cost was £51,127.[1]

Career

Identical half-sister Vixen (left) at Bermuda Dockyard

Vixen, Viper and Waterwitch conducted comparative trials at Stokes Bay in the Solent during the late 1860s.[4] Although turning ability was impressive, none of the ships attained more than 9.5 kn (17.6 km/h) in an era when Warrior could achieve 14.5 kn (26.9 km/h).[3] Furthermore, Vixen was nearly lost in the Irish Channel during a winter gale in 1876,[3] making them unsuitable for the open sea under steam or sail. Vixen and Viper were towed to Bermuda in 1868 where the geography favoured the use of steam-powered rams.

In July 1869 both ships were employed to bring the floating dock Bermuda from The Narrows to the dockyard.[5] 1873 saw the loss of all rigging, masts and upperdeck equipment, and this must have helped her to survive the 1878 hurricane which caused serious damage to the floating dock and other dockyard facilities.

Fate

Viper was reduced to harbour service in 1890,[6] was converted to a tank vessel in 1901[1] and was sold in 1908.[7]

References

This article is issued from Wikipedia - version of the Sunday, November 01, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.