HSL 2

HSL 2
HSL 2 near Hoegaarden alongside A3/E40
Overview
Type	Heavy rail
System	Belgian HSL
Status	In operation
Locale	Belgium
Termini	Leuven Ans
Stations	0
Operation
Opened	15 December 2002
Owner	Infrabel
Operator(s)	Thalys, ICE, SNCB/NMBS
Depot(s)	Vorst, (Leuven, Ans)
Rolling stock	Thalys PBKA, ICE 3M, SNCB Class 18 or Class 13 + I11 or I6 or I10
Technical
Line length	64 km (40 mi)
Track length	128 km (80 mi)
No. of tracks	2
Track gauge	1,435 mm (4 ft 8 ^1⁄2 in) standard gauge
Electrification	25 kV, 50 Hz AC
Operating speed	300 km/h
Route map Legend Legend Brussels-North 0.00 Line 36 Schaerbeek to Buda Haren-Zuid to Haren Diegem Brussels Ring (R0) to Brussels Airport Kortenberg Erps-Kwerps Veltem Herent A2 E 314 Canal crossing to Mechelen to Aarschot and Hasselt 0.00 Leuven to Wavre and Ottignies N25 Line 36 to Tienen and Liège Bierbeek tunnel northwest portal A3 E 40 Bierbeek tunnel southeast portal Waremme - Landen line former Liège - Brussels line Bierset-Awans E 42 E 25 64.7 Ans Liège-Guillemins

The HSL 2 (French: Ligne à Grande Vitesse (LGV) 2, Dutch: Hogesnelheidslijn 2, English: High-Speed Line 2) is a Belgian high-speed rail line between Leuven and Ans. 64 km (40 mi) long, all of it on dedicated high-speed tracks, which began service on 15 December 2002. As part of the Belgian railway network, it is owned, technically operated and maintained by Infrabel.

Now the extension to the German border is complete (the HSL 3), the fastest journey time between Brussels South and Cologne Central Station is 1 hour and 47 minutes. HSL 2 is used by Thalys and ICE trains as well as fast internal Belgian Railways InterCity services.

Route

HSL 2 near Berloz alongside A3/E40

From Brussels South, trains travel northwards over Line 0 through Central and North stations. At Schaarbeek the route splits in two; northward bound trains continue over line 25N, line 25, Antwerp and HSL 4 to the Dutch border, eastward bound trains continue over line 36N, line 2 and line 36 to Liège and from there over line 37 and HSL 3 and again line 37 to the German border. Between Schaarbeek and Leuven there are four tracks; the two outer tracks, line 36, permit travel at 160 km/h (99 mph). The two central tracks, line 36N, were planned for 200 km/h (124 mph) direct service and trainsets equipped with ETCS 1 are now allowed to travel at 200 km/h (124 mph).

At Leuven, trains pass through the existing station at 160 km/h (99 mph). Just outside, HSL 2 proper commences with a speed initially limited to 200 km/h (124 mph). After the Bierbeek tunnel (758 m),^[1] maximum speed is increased to 300 km/h (186 mph) alongside the E40 motorway. Over the last few kilometers, curbing away from the E40, speed is limited to 220 km/h (137 mph). Quitting HSL 2, trains run to Ans station at 140 km/h (87 mph). Between Ans and Liège-Guillemins station, passenger trains run on the modernised line 36 at a speed of 70 km/h (43 mph) (downwards to Liège) or 140 km/h (87 mph) (EMUs upwards to Ans).

Other

HSL 2 is used by 300 km/h (186 mph) Thalys PBKA sets, 250 km/h (155 mph) ICE 3M EMUs and 200 km/h (124 mph) domestic InterCity services run by sets of Class 18 or Class 13 locomotives with I6, I10 or (mostly) I11 carriages. Trains with the new SNCB Class 18 locomotives appeared on the line.^[2] probably in 2010.^[3] DB Velaro D (BR407) is expected soon.

Maintenance bases for the line are situated at Leuven and Ans.

The Belgian cabin signaling system TBL 2 has been installed on the HSL 2. It is operated from Block 12 in Brussels.

HSL 2 is standard gauge, double track, electrified at 25 kV, 50 Hz AC.

See also

• High-speed rail in Belgium
• Rail transport in Belgium

References

1. "Tranchée couverte de Bierbeek". Structurae. Retrieved 2009-01-07.
2. "SNCB/NMBS 18 series". www.railcolor.net. Retrieved 2008-10-02.
3. "45 nouvelles locomotives de la SNCB inutilisables" (in French). La Dernière Heure. Retrieved 2010-05-16.

External links

• Belrail: info on TBL 2 (in French)
• Belrail: HSL 2 (in French)
• Railways in Belgium: HSL 2