Heaving line bend
Heaving line bend | |
---|---|
Names | Heaving line bend, messenger-line bend |
Category | Bend |
Related | Sheet bend, Racking bend |
Typical use | To attach a lightweight line to a heavier line |
ABoK | #1463 |
The heaving line bend is a knot for securely joining two ropes of different diameter or rigidity. It is often used to affix playing strings to the thick silk eyes of an anchorage knot in some stringed instruments. In nautical use, the heaving line bend is used to connect a lighter messenger line to a hawser when mooring ships. It is knot number 1463 in The Ashley Book of Knots[1], and appeared in the 1916 Swedish knot manual Om Knutar.[2]
The heaving line bend is similar to the Sheet bend and the Racking bend, and may be used to pass a thick rope to a distant receiver by first throwing the end of a thinner rope which may be weighted with a Monkey fist or a Heaving line knot
Tying steps
- Make a bight in the larger line.
- Pass the lighter line around the standing part of the bight.
- Cross above the lighter line on the back side.
- Finish by tucking the end between its turn around the standing part of the bight and that leg; pull tight.
See also
References
- ↑ Ashley, Clifford W. (1944). The Ashley Book of Knots. Doubleday.
- ↑ Budworth, Geoffrey (2000). The complete book of sailing knots : stoppers, bindings and shortenings, single, double and triple loops, bends, hitches, other useful knots. New York, NY: Lyons Press. p. 92. ISBN 1585740675. Retrieved 22 April 2016.
This article is issued from Wikipedia - version of the Monday, April 25, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.