Highpoint hitch

Highpoint hitch
Names Highpoint hitch, High post hitch
Category Hitch
Related Buntline hitch
Releasing Non-jamming
Typical use Quick-release, draw loop hitch
ABoK #398, #1809

The highpoint hitch (or high post hitch[1]) is a type of knot used to attach a rope to an object. The main feature of the hitch is that it is very secure, yet if tied as a slipped knot it can be released quickly and easily with one pull, even after heavy loading. The highpoint hitch is a buntline hitch with an extra half turn, making it more secure.[2]

Security

The highpoint hitch is very secure, since any load will tighten the turns against each other, at the same time tightening the grip on the working end.

Releasing

To release the slipped version of this knot, pull the working end in the direction of the load. This action pulls the two turns apart at the same time as releasing the draw-loop, and the whole knot simply falls apart.

Tying

To tie the hitch around a pole, begin by passing the working end a half turn round the pole. Next, pass a half turn round the standing part. Then, pass a half turn round both the working end and the standing part, above the first turn (i.e. closer to the pole). Finally, push a bight of the working end through the middle of the hitch - between the two half turns, and between the standing part and the working end. Pull on the standing part to tighten, if necessary sliding the hitch snugly up against the pole.

Tying the highpoint hitch
Partially tied slipped highpoint hitch
Completed slipped highpoint hitch

References

  1. Ashley, Clifford. "The Ashley Book of Knots". Doubleday, pp. 63,305.
  2. Ashley, Clifford. "The Ashley Book of Knots". Doubleday, p. 63.


This article is issued from Wikipedia - version of the Monday, July 27, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.