Hydrogen fluoride

Hydrogen fluoride

Identifiers
CAS Number	7664-39-3
ChEBI	CHEBI:29228
ChemSpider	14214
Jmol 3D model	Interactive image
KEGG	C16487
PubChem	16211014
RTECS number	MW7875000
UNII	RGL5YE86CZ
InChI InChI=1S/FH/h1H Key: KRHYYFGTRYWZRS-UHFFFAOYSA-N InChI=1/FH/h1H Key: KRHYYFGTRYWZRS-UHFFFAOYAC
SMILES F
Properties
Chemical formula	FH
Molar mass	20.01 g·mol^−1
Appearance	colourless gas or colourless liquid (below 19.5°C)
Density	1.15 g/L, gas (25 °C) 0.99 g/mL, liquid (19.5 °C)
Melting point	−83.6 °C (−118.5 °F; 189.6 K)
Boiling point	19.5 °C (67.1 °F; 292.6 K)
Solubility in water	miscible
Vapor pressure	783 mmHg (20 °C)[1]
Acidity (pKa)	3.17[2][3]
Refractive index (nD)	1.00001
Structure
Molecular shape	Linear
Dipole moment	1.86 D
Thermochemistry
Std molar entropy (S^o298)	8.687 J/g K (gas)
Std enthalpy of formation (ΔfH^o298)	−13.66 kJ/g (gas) −14.99 kJ/g (liquid)
Hazards
NFPA 704	0 4 1
Lethal dose or concentration (LD, LC):
LC50 (Median concentration)	1276 ppm (rat, 1 hr) 1774 ppm (monkey, 1 hr) 4327 ppm (guinea pig, 15 min)[4]
LCLo (Lowest published)	313 ppm (rabbit, 7 hr)[4]
US health exposure limits (NIOSH):
PEL (Permissible)	TWA 3 ppm[1]
REL (Recommended)	TWA 3 ppm (2.5 mg/m^3) C 6 ppm (5 mg/m^3) [15-minute][1]
IDLH (Immediate danger)	30 ppm[1]
Related compounds
Other anions	Hydrogen chloride Hydrogen bromide Hydrogen iodide Hydrogen astatide
Other cations	Sodium fluoride Potassium fluoride Rubidium fluoride Caesium fluoride
Related compounds	Water Ammonia
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
verify (what is  ?)
Infobox references

Hydrogen fluoride is a chemical compound with the chemical formula HF. This colorless gas or liquid is the principal industrial source of fluorine, often as an aqueous solution called hydrofluoric acid. It thus is the precursor to many important compounds including pharmaceuticals and polymers (e.g. Teflon). HF is widely used in the petrochemical industry as a component of superacids. Hydrogen fluoride boils near room temperature, much higher than other hydrogen halides. Unlike other hydrogen halides, HF is lighter than air.

Hydrogen fluoride is a highly dangerous gas, forming corrosive and penetrating hydrofluoric acid upon contact with moisture. The gas can also cause blindness by rapid destruction of the corneas.

French chemist Edmond Frémy (1814–1894) is credited with discovering anhydrous hydrogen fluoride while trying to isolate fluorine, although Carl Wilhelm Scheele prepared hydrofluoric acid in large quantities in 1771, and this acid was known in the glass industry before then.

Structure

Although a diatomic molecule, HF forms relatively strong intermolecular hydrogen bonds. Solid HF consists of zigzag chains of HF molecules. The HF molecules, with a short H–F bond of 95 pm, are linked to neighboring molecules by intermolecular H–F distances of 155 pm.^[5] Liquid HF also consists of chains of HF molecules, but the chains are shorter, consisting on average of only five or six molecules.^[6]

Comparison with other hydrogen halides

Hydrogen fluoride does not boil until 20 °C in contrast to the heavier hydrogen halides which boil between −85 °C (−120 °F) and −35 °C (−30 °F).^[7][8][9] This hydrogen bonding between HF molecules gives rise to high viscosity in the liquid phase and lower than expected pressure in the gas phase.

Hydrogen fluoride is miscible with water (dissolves in any proportion), whereas the other hydrogen halides have large solubility gaps with water. Hydrogen fluoride and water also form several compounds in the solid state, most notably a 1:1 compound that does not melt until −40 °C (−40 °F), which is 44 °C (79 °F) above the melting point of pure HF.^[10]

HF and H2O similarities
Boiling points of the hydrogen halides (blue) and hydrogen chalcogenides (red): HF and H2O break trends.	Freezing point of HF/ H2O mixtures: arrows indicate compounds in the solid state.

Acidity

Unlike other hydrohalic acids, such as hydrochloric acid, hydrogen fluoride is only a weak acid in dilute aqueous solution.^[11] This is in part a result of the strength of the hydrogen-fluorine bond, but also of other factors such as the tendency of HF, H
2O, and F−
anions to form clusters.^{[note 1]} At high concentrations, HF molecules undergo homoassociation to form polyatomic ions (such as bifluoride, HF−
2) and protons, thus greatly increasing the acidity.^[13] This leads to protonation of very strong acids like hydrochloric, sulfuric, or nitric when using concentrated hydrofluoric acid solutions.^[14] Although hydrofluoric acid is regarded as a weak acid, it is very corrosive, even attacking glass when hydrated.^[13]

The acidity of hydrofluoric acid solutions varies with concentration owing to hydrogen-bond interactions of the fluoride ion. Dilute solutions are weakly acidic with an acid ionization constant K_a = 6.6×10⁻⁴ (or pK_a = 3.18),^[15] in contrast to corresponding solutions of the other hydrogen halides which are strong acids (pK_a < 0). Concentrated solutions of hydrogen fluoride are much more strongly acidic than implied by this value, as shown by measurements of the Hammett acidity function H₀^[16] (or "effective pH"). The H₀ for 100% HF is estimated to be between −10.2 and −11, comparable to the value −12 for sulfuric acid.^[17][18]

In thermodynamic terms, HF solutions are highly non-ideal, with the activity of HF increasing much more rapidly than its concentration. The weak acidity in dilute solution is sometimes attributed to the high H—F bond strength, which combines with the high dissolution enthalpy of HF to outweigh the more negative enthalpy of hydration of the fluoride ion.^[19] However, Giguère and Turrell^[20][21] have shown by infrared spectroscopy that the predominant solute species is the hydrogen-bonded ion-pair [H₃O⁺·F⁻], which suggests that the ionization can be described as a pair of successive equilibria:

H₂O + HF [H₃O⁺·F⁻]

[H₃O⁺·F⁻] H₃O⁺ + F⁻

The first equilibrium lies well to the right (K ≫ 1) and the second to the left (K ≪ 1), meaning that HF is extensively dissociated, but that the tight ion pairs reduce the thermodynamic activity coefficient of H₃O⁺, so that the solution is effectively less acidic.^[22]

In concentrated solution, the additional HF causes the ion pair to dissociate with formation of the hydrogen-bonded hydrogen difluoride ion.^[20][22]

[H₃O⁺⋅F⁻] + HF ⇌ H₃O⁺ + HF−
2

The increase in free H₃O⁺ due to this reaction accounts for the rapid increase in acidity, while fluoride ions are stabilized (and become less basic) by strong hydrogen bonding to HF to form HF−
2. This interaction between the acid and its own conjugate base is an example of homoassociation (homoconjugation). At the limit of 100% liquid HF, there is self-ionization^[23][24]

3 HF ⇌ H₂F⁺ + HF−
2

which forms an extremely acidic solution (H₀ = −11).

The acidity of anhydrous HF can be increased even further by the addition of Lewis acids such as SbF₅, which can reduce H₀ to −21.^[17][18]

Solvent

Dry hydrogen fluoride readily dissolves low-valent metal fluorides as well as several molecular fluorides. Many proteins and carbohydrates can be dissolved in dry HF and recovered from it. In contrast, most non-fluoride inorganic chemicals react with HF rather than dissolving.^[25]

Production and uses

Hydrogen fluoride is produced by the action of sulfuric acid on pure grades of the mineral fluorite and also as a side-product of the extraction of the fertilizer precursor phosphoric acid from various minerals. See also hydrofluoric acid.

The anhydrous compound hydrogen fluoride is more commonly used than its aqueous solution, hydrofluoric acid. HF serves as a catalyst in alkylation processes in oil refineries. A component of high-octane petrol (gasoline) called "alkylate" is generated in alkylation units that combine C₃ and C₄ olefins and iso-butane to generate petrol (gasoline).^[26]

HF is a reactive solvent in the electrochemical fluorination of organic compounds. In this approach, HF is oxidized in the presence of a hydrocarbon and the fluorine replaces C–H bonds with C–F bonds. Perfluorinated carboxylic acids and sulfonic acids are produced in this way.^[26]

Hydrogen fluoride is an important catalyst used in the majority of the installed linear alkyl benzene production in the world. The process involves dehydrogenation of n-paraffins to olefins, and subsequent reaction with benzene using HF as catalyst.

Elemental fluorine, F₂, is prepared by electrolysis of a solution of HF and potassium bifluoride. The potassium bifluoride is needed because anhydrous hydrogen fluoride does not conduct electricity. Several million kilograms of F₂ are produced annually.^[27]

Acyl chlorides or acid anhydrides react with hydrogen fluoride to give acyl fluorides.^[28]

HF is often used in palynology to remove silicate minerals, for extraction of dinoflagellate cysts, acritarchs and chitinozoans.

1,1-Difluoroethane is produced by the mercury-catalyzed addition of hydrogen fluoride to acetylene:^[29]

HC≡CH + 2 HF → CH₃CHF₂

The intermediate in this process is vinyl fluoride, the monomeric precursor to polyvinyl fluoride.

Health effects

HF burns, not evident until a day after

Upon contact with moisture, including tissue, hydrogen fluoride immediately converts to hydrofluoric acid, which is highly corrosive and toxic, and requires immediate medical attention upon exposure.^[30] Breathing in hydrogen fluoride at high levels or in combination with skin contact can cause death from an irregular heartbeat or from fluid buildup in the lungs.^[30]

Notes

1. For more detailed explanation, see ^[12]

References

1. "NIOSH Pocket Guide to Chemical Hazards #0334". National Institute for Occupational Safety and Health (NIOSH).
2. "pKa's of Inorganic and Oxo-Acids" (PDF). Harvard. Retrieved 9 September 2013.
3. Bruckenstein, S.; Kolthoff, I.M., in Kolthoff, I.M.; Elving, P.J. Treatise on Analytical Chemistry, Vol. 1, pt. 1; Wiley, NY, 1959, pp. 432-433.
4. "Hydrogen fluoride". Immediately Dangerous to Life and Health. National Institute for Occupational Safety and Health (NIOSH).
5. Johnson, M. W.; Sándor, E.; Arzi, E. (1975). "The Crystal Structure of Deuterium Fluoride". Acta Crystallographica B31 (8): 1998–2003. doi:10.1107/S0567740875006711.
6. Mclain, Sylvia E.; Benmore, CJ; Siewenie, JE; Urquidi, J; Turner, JF (2004). "On the Structure of Liquid Hydrogen Fluoride". Angewandte Chemie, International Edition 43 (15): 1952–55. doi:10.1002/anie.200353289. PMID 15065271.
7. Pauling, Linus A. (1960). The nature of the chemical bond and the structure of molecules and crystals: An introduction to modern structural chemistry. Cornell University Press. pp. 454–464. ISBN 978-0-8014-0333-0.
8. Atkins, Peter; Jones, Loretta (2008). Chemical principles: The quest for insight. W. H. Freeman & Co. pp. 184–185. ISBN 978-1-4292-0965-6.
9. Emsley, John (1981). "The hidden strength of hydrogen". New Scientist 91 (1264): 291–292. Retrieved 25 December 2012.
10. Greenwood & Earnshaw 1998, pp. 812–816.
11. Wiberg, Wiberg & Holleman 2001, p. 425.
12. Clark, Jim (2002). "The acidity of the hydrogen halides". Retrieved 4 September 2011.
13. Chambers, C.; Holliday, A. K. (1975). Modern inorganic chemistry (An intermediate text) (PDF). The Butterworth Group. pp. 328–329.
14. Hannan, Henry J. (2010). Course in chemistry for IIT-JEE 2011. Tata McGraw Hill Education Private Limited. pp. 15–22. ISBN 9780070703360.
15. Ralph H. Petrucci; William S. Harwood; Jeffry D. Madura (2007). General chemistry: principles and modern applications. Pearson/Prentice Hall. p. 691. ISBN 978-0-13-149330-8. Retrieved 22 August 2011.
16. H.H. Hyman; et al. (1957). "The Hammett acidity function H₀ for HF aqueous solutions". J. Amer. Chem. Soc. 79 (14): 3668. doi:10.1021/ja01571a016.
17. W.L. Jolly “Modern Inorganic Chemistry” (McGraw-Hill 1984), p. 203 ISBN 0-07-032768-8
18. F. A. Cotton and G. Wilkinson, Advanced Inorganic Chemistry (5th ed.) John Wiley and Sons: New York, 1988. ISBN 0-471-84997-9 p. 109
19. C.E. Housecroft and A.G. Sharpe "Inorganic Chemistry" (Pearson Prentice Hall, 2nd ed. 2005), p. 170.
20. Giguère, Paul A.; Turrell, Sylvia (1980). "The nature of hydrofluoric acid. A spectroscopic study of the proton-transfer complex H₃O⁺...F⁻". J. Am. Chem. Soc. 102 (17): 5473. doi:10.1021/ja00537a008.
21. Radu Iftimie, Vibin Thomas, Sylvain Plessis, Patrick Marchand, and Patrick Ayotte (2008). "Spectral Signatures and Molecular Origin of Acid Dissociation Intermediates". J. Am. Chem. Soc. 130 (18): 5901–7. doi:10.1021/ja077846o. PMID 18386892.
22. F.A. Cotton and G. Wilkinson, Advanced Inorganic Chemistry p. 104
23. C.E. Housecroft and A.G. Sharpe Inorganic Chemistry p. 221
24. F.A. Cotton and G. Wilkinson Advanced Inorganic Chemistry p. 111
25. Greenwood & Earnshaw 1998, pp. 816–819.
26. J. Aigueperse, P. Mollard, D. Devilliers, M. Chemla, R. Faron, R. Romano, J. P. Cuer, "Fluorine Compounds, Inorganic" in Ullmann’s Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim, 2005 doi:10.1002/14356007.a11_307.
27. M. Jaccaud, R. Faron, D. Devilliers, R. Romano "Fluorine" in Ullmann’s Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim, 2005 doi:10.1002/14356007.a11_293.
28. Olah G, Kuhn S (1961). "Preparation of Acyl Fluorides with Anhydrous Hydrogen Fluoride. The General Use of the Method of Colson and Fredenhagen". J. Org. Chem 26: 237–238. doi:10.1021/jo01060a600.
29. Siegemund, Günter; Schwertfeger, Werner; Feiring, Andrew; Smart, Bruce; Behr, Fred; Vogel, Herward; McKusick, Blaine (2010). "Fluorine Compounds, Organic". In Bohnet, Matthias; Bellussi, Giuseppe; Bus, James; et al. Ullmann's Encyclopedia of Industrial Chemistry. John Wiley & Sons. doi:10.1002/14356007.a11_349.
30. Facts About Hydrogen Fluoride (Hydrofluoric Acid)

External links

• "ATSDR – MMG: Hydrogen Fluoride". Retrieved May 14, 2006
• CDC - NIOSH Pocket Guide to Chemical Hazards