Japanese tanks of World War II
| ||||||||||||||
The Imperial Japanese Army (IJA) initially purchased foreign tanks for evaluation during World War I, and began developing its own indigenous designs during the late 1920s.
Due to the war with China, Japan produced a large number of tanks. Although initially the Japanese used tanks to good effect in their campaigns, full-scale armored warfare did not occur in the Pacific and Southeast Asian theaters as it did in Europe, and tank development was neglected in favor of naval activities. The best Japanese designs were never used in combat as they were kept back in expectation of defending the Japanese Home Islands.
Initial tank procurement
Near the end of World War I, the Japanese showed an interest in armored warfare and tanks and obtained a variety of models from foreign sources. These models included one British Heavy Mk IV and six Medium Mark A Whippets, along with thirteen French Renault FTs (later designated Ko-Gata Sensha or "Type A Tank"). The Mk IV was purchased in October 1918 while the Whippets and Renaults were acquired in 1919.[1]
Trials with these vehicles were successful, and the Army decided to establish an armored force in 1925, planning to form three light tank battalions and one heavy tank battalion. However, the greatest problem was equipping these units, as the Japanese did not have any indigenous tank production capability. The IJA therefore sent a mission to purchase more tanks from Britain and France, requesting newer designs. However, the newer tanks were not available as these countries had difficulties supplying them to their own armored forces, and the only available model was the older Renault FT.[2] The Japanese reluctantly imported these but in 1929 they were able to acquire ten examples of its successor, the Renault NC1 (designated Otsu-Gata Sensha or "Type B Tank"). Both types of tanks were still in active service in 1940, and additional vehicles and spare parts were obtained after the Japanese occupation of French Indochina.
The Japanese also purchased several Vickers 6-Ton tanks and Carden Loyd tankettes and used these as a basis for further development, resulting in tanks such as the Type 89 Chi-Ro.
Doctrine
As with the Americans and the Italians, the Japanese originally adopted French-designed tanks, and were influenced by their doctrines and employment. As with many other nations at the time, the Japanese viewed the tank as a tool largely used in direct support of their infantry, and were rarely allowed independent action. During the Second Sino-Japanese War, Japanese tanks were successful, especially as the Chinese had no significant armoured forces of their own.
With their defeat by the Soviet Union at Nomonhan in 1939, the Japanese began to rethink their tank designs and doctrine, although their emphasis would continue to remain on supporting the infantry. However, with the beginning of the Pacific War, Japan's priorities shifted to warship and aircraft production, and resources for the production of armored vehicles for the Army were diverted or curtailed.[3]
In addition, the terrain of Southeast Asia and the islands of the Pacific were in general not suited to armored warfare, being largely tropical rainforests. Aside from the invasion of Malaya, and the Philippines, large-scale Japanese use of tanks was limited and therefore development of newer designs were not given high priority.
Older tanks continued to be used as defensive emplacements and infantry support weapons. Advanced Japanese tank designs which could challenge Allied tanks did not appear until the close of World War II; these were experimental or produced in small quantities, and ultimately, not enough to affect the course of the war.
Japanese designs
For both security and logistical reasons, many engineers in the Japanese Army Technical Bureau during the early 1920s were adamant that future tanks should be made in Japan. General Suzuki (chief of the Technical Bureau) protested the Ministry of War decision to purchase foreign designs, which ultimately led to that decision being reversed.
However, indigenous design and production of armored vehicles would prove to be difficult, due to minimal experience with military motor vehicle design (the engineers had only designed several types of trucks and one type of tractor), along with low priority for tank steel production. Moreover, the first design had to be completed in only two years or the program would be canceled.
Type 87 Chi-I medium tank (Experimental 1st tank)
Development of the first Japanese-designed tank began in June 1925. A team of four engineers in the motorcar group of the Technical Bureau participated in the development, including a young army officer, Major Tomio Hara. Major Hara later became the head of the tank development department and would rise to the rank of General. The team started their design of a tank and worked hard to complete the project within the two years allocated. As this was the first tank designed in Japan, they had to begin with almost every component built from scratch.
Hara designed a bell crank scissors suspension which paired the bogie wheels and connected them to a coil spring mounted horizontally outside the hull. This suspension became standard on the majority of Japanese tanks and can be seen on the Type 89 medium tank.
The design was completed in May 1926 and production was ordered to begin at the Osaka Army Arsenal. At the time, there was little heavy industry allocated to the production of motor vehicles in Japan, so there were significant difficulties creating the prototype. The prototype was completed in February 1927, within the required period. The Vickers Mark C - an offering that had not been adopted by the British - had been purchased for engineering reference and delivered soon after; it caught fire during a trial and although repaired acted as incentive for the Japanese to adopt diesel engines. Many IJA generals attended the trials of the Type 87 on June 21–22, 1927, and the tank showed acceptable performance during movement in rough terrain and on slopes. Along with the Osaka Army Arsenal, Sagami Army Arsenal was also assigned to oversee the design and manufacture of assorted types of armored vehicles and tanks.
Type 89 Chi-Ro medium tank
The IJA decided that the Type 87 was too heavy at 18 tons and too slow to be used as its main tank, and the Type 89 Chi-Ro was developed to overcome these shortcomings. The new design weighed 12.8 tons and used stronger and lighter steel plate instead of the Type 87's iron armor. Armament was a Type 90 57 mm gun, along with one (later two) Type 91 6.5mm machine guns. The Type 89 design was completed in April 1929, with production starting in 1931, making this the first tank to be mass-produced in Japan. The Type 89 had two variants - the Kō ("A") version, which used a water-cooled gasoline engine, and the Otsu ("B") version, with an air-cooled diesel engine and improved frontal armor. The Type 89 first saw combat in China, but was in the process of being replaced by the Type 97 Chi-Ha at the start of World War II.
Type 95 Ha-Go light tank
.jpg)
The Type 95 Ha-Go was a replacement for the Type 89 medium tank which was considered too slow for mechanized warfare. The prototypes were built by Mitsubishi and production was started in 1935, with over 2000 completed by the end of the war. It was armed with a 37 mm main gun and two 7.7 mm (0.303 inch) machine guns, one in the turret rear and the other hull-mounted. The Type 95 weighed 7.4 tons and had three crewmen. It served during the Battle of Khalkhin Gol (Nomonhan) against the Soviet Union in 1939,[4] against the British Army in Burma and India,[5] and throughout the Pacific Theater during World War II. On 22 December 1941 the Type 95 light tank earned the distinction of being the first tank to engage in tank vs tank combat with US manned American tanks (M3 Stuart light tanks in the Philippines) during World War II; and the only enemy tanks to have ever landed on North American soil during any war.[5][6] Several variants were built, among them the Type 3 Ke-Ri, which mounted a 57 mm Model 97 gun, the Ta-Se, an anti-aircraft tank which mounted a 20mm AA gun, and the Type 5 Ho-Ru, a casemate-hulled turretless self-propelled gun similar to the German Hetzer, but with a 47 mm gun.
Type 97 Chi-Ha medium tank
The Type 97 medium tank Chi-Ha (九七式中戦車 チハ Kyunana-shiki chu-sensha chiha) was the most widely produced Japanese medium tank of World War II, with about 26 mm thick armor on its turret sides, and 33 mm on its gun shield, considered average protection in the 1930s.[7] Some 3,000 units were produced by Mitsubishi, including several types of specialized tanks. Initial versions were armed with a low-velocity 57 mm gun, but from 1942 onwards, the Model 97 was armed with a high-velocity 47 mm cannon, mounted in a larger turret taken from the Type 1 Chi-He medium tank (see below). This version was designated Shinhoto Chi-Ha ("new turret") and is considered by many to be one of the best Japanese tank designs of the war.
Type 98 Ke-Ni light tank
The Type 98 light tank Ke-Ni (九八式軽戦車ケニ Kyuhachi-shiki keisensha Ke-Ni) was designed to replace the Imperial Japanese Army's Type 95 Ha-Go light tank. Although developed in 1938 to address deficiencies in the Type 95 design already apparent from combat experience in Manchukuo and China in the Second Sino-Japanese War. The prototype of the new Type 98 tank was completed in 1939 but production did not begin until 1942. With the start of World War II, the Imperial Japanese Army General Staff quickly realized that the Type 95 design was vulnerable to heavy machinegun fire - 0.5 in (13 mm) - and as such attempted to develop a light tank with the same weight as the Type 95, but with thicker armor. The Type 98 had a conventional two-man turret, an improvement on the asymmetrical turret used on the Type 95, carrying a Type 100 37mm tank gun, with a muzzle velocity of 760 m/s (2,500 ft/s) and with a coaxial 7.7 mm machine-gun to the side. Only 103 Type 98s were built: 24 in 1942 and 79 in 1943.
Type 1 Chi-He medium tank
The Type 1 Chi-He was developed in 1942 to replace the Type 97. The newer tank proved to be superior to the Type 97 in both speed and armor protection, but due to the rapid pace of events, the Japanese Army had shown little interest in this new tank. The turret and 47 mm gun of the Type 1 could be mounted on the hull of the Type 97 (creating the Shinhoto Chi-Ha version) and the factories were already mass-producing the older tank. Production of the Chi-He started in 1944, but was discontinued after less than one year in favor of the Type 3 Chi-Nu medium tank.
Type 3 Chi-Nu medium tank
The Type 3 Chi-Nu medium tank was urgently developed to counter the American M4 Sherman medium tank. Originally, the next tank in development to replace the Chi-He was the Type 4 Chi-To medium tank. However, the development of the Chi-To and the Type 5 Chi-Ri heavy tank was delayed, again due to a steel shortage, and a stopgap tank was required. The development of Chi-Nu started in May 1944 and was completed in October of that year. It was an improved version of the Type 97 Chi-Ha line by giving it a large new hexagonal gun turret and a main armament of the Type 3 75 mm Tank Gun; one of the largest guns used on Japanese tanks during the war.[8] The Chi-Nu was the last tank deployed by the IJA, and production continued until the end of the war with 166 built. The tank was allocated to the Japanese home islands to defend against the projected Allied Invasion.
Type 4 Chi-To medium tank
The Type 4 medium tank Chi-To (四式中戦車 チト Yonshiki chūsensha Chi-To) was one of several new medium and heavy tanks developed by the Imperial Japanese Army towards the end of World War II. It was by far the most advanced Japanese wartime tank to reach the production phase.[9]
The Type 4 Chi-To was a thirty-ton, all-welded tank with a maximum armor thickness of about 75 mm. It was much larger than the Type 97 Chi-Ha, with a longer, wider, tall chassis, supported by seven road wheels. The main armament, a Type 5 75 mm Tank Gun was housed in a large powered, well-armoured hexagonal gun turret along with a coaxial machine gun. A single Type 97 light machine gun was also mounted in the bow. Only two Type 4 Chi-To tanks were completed prior to the end of the war. Neither unit saw combat use.[9][10]
Type 5 Chi-Ri medium tank
The Type 5 medium tank Chi-Ri (五式中戦車 Go-shiki chusensha Chi-ri) was the penultimate medium tank developed by the Imperial Japanese Army in World War II. Intended to be a heavier, lengthened, more powerful version of Japan's sophisticated Type 4 Chi-To medium tank, in performance it was designed to surpass the US M4 Sherman medium tanks being fielded by the Allied forces. Originally, the tank was to be fitted with the same Type 5 75 mm Tank Gun used on the Type 4 Chi-To.[11][12] Eventually, an 88 mm gun (based on the Type 99 88 mm AA Gun) was planned for the turret; a secondary weapon of a front hull-mounted Type 1 37 mm Tank Gun was fitted in the position normally taken by a machine gun.[11][13]
As with many innovative weapons projects launched by Japan in the final days of World War II, production could not advance beyond the prototype stage due to material shortages, and the loss of Japan's industrial infrastructure to the allied bombing of Japan. The single prototype Type 5 was seized by American forces during the occupation of Japan.
Experimental Type 5 Ho-Ri tank destroyer
The Ho-Ri was a more powerful tank destroyer (gun tank) version of the Type 5 Chi-Ri, using a 105 mm cannon in place of the 75 mm design. As it was apparently intended to use a turretless casemate-mount for its large calibre gun, this design was possibly inspired by the German Ferdinand/Elefant heavy tank destroyer. No prototype was built.
O-I superheavy tank
The O-I experimental superheavy tank had three turrets and weighed 120 tons, and required a crew of 11 men. It was 10 meters long by 4.2 meters wide with an overall height of 4 meters. The armor was 200 mm at its maximum, and the tank had a top speed of 25 km/h. This version had two gasoline engines, and was armed with 1 x 105 mm cannon, 1 x Type 1 37 mm (in a forward-mounted sub-turret), and 3 x Type 97 7.7 mm machine guns (one mounted in a forward sub-turret) while an ultraheavy version also mounted a Type 1 37 mm in a rear-facing sub-turret. It has been reported that one copy of the O-I was manufactured before the end of the war and was shipped to Manchuria, according to an engineer concerned with the project.[14] No images of the O-I have been found, only some drawings are known to exist.
Amphibious tanks
.jpg)
Japan produced several amphibious tank designs, including the Type 1 Mi-Sha, Type 2 Ka-Mi, Type 3 Ka-Chi, Type 4 Ka-Tsu, Type 4 Ka-Sha, Type 5 To-Ku, F B Swamp Vehicle, Type 4 Ka-Tsu, Toku 4 Shiki Naikatei APC, and the SRII Ro-Go for use by the Japanese Special Naval Landing Forces. The Type 1 was an early experimental design, that led to the Type 2 Ka-Mi, which was the first production Japanese amphibious tank, although only 184 were built. The Type 3 Ka-Chi was first encountered by Allied forces at the Battle of Kwajalein in 1944, however, only 19 were built during the war. The tanks were used later in the war as dug-in pillboxes on Pacific islands.
Overall production
In the period between 1931 and 1938 the Japanese built nearly 1,700 new tanks giving them, by 1940, the 5th largest tank force in the world.[15] By 1937, Japan fielded 1,060 tanks in 8 regiments. The peak of Japanese tank production was in 1942, but declined afterwards owing to aircraft and warship priorities, along with material shortages. By 1944, total production of tanks was approximately 295. Japan developed many experimental and operative armored vehicles and tank types throughout the war; but largely held them in reserve, for home-land defense.
See also
- List of Japanese armoured fighting vehicles of World War II
- Tanks in the Japanese Army
- List of Japanese armored divisions
- 1st Tank Division (Imperial Japanese Army)
- 2nd Tank Division (Imperial Japanese Army)
- 3rd Tank Division (Imperial Japanese Army)
- 4th Tank Division (Imperial Japanese Army)
References
- Notes
- ↑ Zaloga, p.4
- ↑ Hara (1972), p. 3
- ↑ Zaloga, p.3
- ↑ Coox; Nomonhan
- 1 2 Hunnicutt p. 395
- ↑ Zaloga, photo & caption p. 17
- ↑ Zaloga (Japanese Tanks) p. 11
- ↑ Tomczyk, Andrzej, Japanese Armor Vol. 4, pp. 3, 5.
- 1 2 "Type 4 Chi-To Medium Tank". History of War. Retrieved 10 December 2014.
- ↑ Tomczyk, Japanese Armor Vol. 4, pp. 19, 20-22, 30
- 1 2 "Type 5 Chi-Ri Medium Tank". History of War. Retrieved 10 December 2014.
- ↑ Tomczyk, Japanese Armor Vol. 4, pp. 29, 30.
- ↑ Zaloga (2007). Japanese Tanks 1939-45, p. 22
- ↑ "Tanks! Armored Warfare Prior to 1946". Archived from the original on 6 August 2014. Retrieved 10 December 2014.
- ↑ Zaloga p. 3; "Japan was in the forefront of tank technology in the 1930s".
- Bibliography
- Coox, Alvin D (1985). Nomonhan: Japan Against Russia, 1939. Two volumes. Stanford University Press. ISBN 978-0-8047-1160-9.
- Hara, T (1973). Japanese Combat Cars, Light Tanks, and Tankettes. AFV Weapons Profile No. 54.
- Hara, T (1972). Japanese Medium Tanks. AFV Weapons Profiles No.49.
- Hunnicutt, R. P. (1992). Stuart: A History of the American Light Tank. Volume One. Presidio Press. ISBN 978-0-89141-462-9.
- Tomczyk, Andrzej (2005). Japanese Armor. Vol. 4. AJ Press. ISBN 83-7237-167-9.
- Zaloga, Steven J. (2007). Japanese Tanks 1939-45. Osprey Publishing. ISBN 978-1-84603-091-8.
External links
| ||||||||||||||||||||||||||||||||||
.svg.png){kind=small}