LB&SCR E1 class

London Brighton and South Coast Railway
Classes E1, E1X and E1/R

E1 class, 155 Brenner
Type and origin
Power type Steam
Specifications
Configuration 0-6-0
Driver diameter 4 ft 6 in (1.37 m)
Length 32 ft 4.5 in (9.868 m)
Loco weight 44.15 long tons (44.9 t)
Fuel capacity 1.5 long tons (1.5 t; 1.7 short tons)
Water cap 900 imp gal (4,090 L; 1,080 US gal)
Firebox:
 • Firegrate area		 16 sq ft (1.5 m2)
Boiler pressure 160 psi (1.1 MPa)
Heating surface 977 sq ft (90.8 m2)
Cylinders 2, inside
Cylinder size 17 in × 24 in (430 mm × 610 mm)
Performance figures
Tractive effort 17,470 lbf (77.7 kN)
Career
Operators London Brighton and South Coast Railway, Southern Railway, Southern Region of British Railways
Class E1, E1X, E1/R
Power class
Locale Great Britain
First run September 1874

The London, Brighton and South Coast Railway E1 Class were 0-6-0T steam locomotives designed by William Stroudley in 1874 for short-distance goods and piloting duties. They were originally classified E, and generally known as "E-tanks"; They were reclassified E1 in the time of D. E. Marsh.

Construction and use

The first six locomotives of this useful and long-lived class were built at Brighton and appeared in traffic between September 1874 and March 1875. They performed well and further orders were placed at regular intervals until December 1891 when the class consisted of eighty locomotives and were used throughout the LBSCR system, principally for goods and shunting, but occasionally for secondary passenger duties.

In 1884 Stroudley also built one example of the class (No. 157 Barcelona) with a larger boiler and Gladstone-type cylinders with valves underneath to work on the steeply-graded lines between Eastbourne and Tunbridge Wells. This Special E-tank was withdrawn in 1922.[1]

Rebuilds and withdrawals

E1 No. 2133 in early British Railways livery, before renumbering - circa 1949.
E1/R 0-6-2T No. 32124 piloting a Bulleid Light Pacific at Exeter St David's 16 July 1949

After 1894/95 the class gradually began to be replaced by R.J. Billinton's radial tanks of the E3 and E4 classes. Withdrawals commenced in 1908 when one locomotive was broken up for spares, and others were withdrawn at intervals until May 1914, when the increased need for locomotives during the First World War meant that there were no further withdrawals. One locomotive (no. 89) was rebuilt with a larger boiler by D. E. Marsh between January and June 1911 and reclassified E1X; it was renumbered 89A in October 1911, and 689 in December 1912.[2] However this was rebuilt as an E1 in 1930 once the boiler was condemned.

Under Southern Railway (Great Britain) ownership, withdrawals continued during the 1920s, with some examples sold to industrial railways rather than scrapped. Eight examples were also rebuilt as 0-6-2 radial tank engines for use in the west of England. These were classified as E1/R.

Four E1s were also transferred for duties on the Isle of Wight: three were shipped from Southampton on 4 July 1932 and a fourth on 16 June 1933.[3] Before transfer, they were overhauled at Eastleigh Works, painted green, renumbered W1-W4 and given names related to the Island.[3][4]

Nos. W1–W3 were allocated to Newport, and no. W4 was at Ryde. They were primarily intended for goods traffic, but were used on passenger trains where necessary. At speed they were unsteady, but after no. W4 was successfully rebalanced at Ryde Works in October 1933, the others were modified similarly during 1935–36.[5]

Thirty examples survived the transfer of ownership to the Southern Region of British Railways in 1948 but during the 1950s they were gradually replaced by diesel shunters. The last survivor, BR no 32694, was allocated to Southampton Docks. It was withdrawn in July 1961 and scrapped at Eastleigh Works later that year.

The four on the Isle of Wight worked goods trains until route closures in the 1950s brought a reduction in their duties. When repairs became due, they were withdrawn from service instead of being overhauled: no. W2 was withdrawn in SEptember 1956, no. W1 in March 1957, no. W3 in June 1959 and no. W4 in October 1960.[6]

Preservation

One example, No. B110 (originally No. 110 Burgundy) was sold in 1927 to the Cannock and Rugeley Colliery Company. They gave it the number 9 and named it Cannock Wood, and it worked their internal system until 1963.

After withdrawal it was bought for preservation and moved between several sites before restoration began in 1986 and it returned to action at the East Somerset Railway in 1993. It was withdrawn prematurely in 1997 requiring firebox and boiler repairs, and spent many years in pieces awaiting overhaul,[7] although in 2011 it was cosmetically restored into (inauthentic) BR black.[8]

In 2012, B110 was sold to the Isle of Wight Steam Railway, in return for the move to the ESR of LMS Ivatt Class 2 no. 46447. The railway plans to restore the engine and run it as No. W2 Yarmouth, which was an identity previously worn by one of the Isle of Wight based E1s.

Notes

  1. ↑ Haresnape Brian, "Stroudley Locomotives" Ian Allan, London 1885, Pages 111, 112
  2. ↑ Bradley 1972, p. 34.
  3. 1 2 Bradley 1972, p. 37.
  4. ↑ Bradley 1982, p. 45.
  5. ↑ Bradley 1982, p. 40.
  6. ↑ Bradley 1982, pp. 43, 45.
  7. ↑ http://www.railwayweb.com/clf/Projects/E1/intro.htm
  8. ↑ http://www.eastsomersetrailway.com/gallery.php?gid=315

References

External links

Wikimedia Commons has media related to LB&SCR E1 class.
This article is issued from Wikipedia - version of the Sunday, August 31, 2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.