Lava lamp

An original Mathmos Astro lava lamp

A lava lamp (or Astro lamp) is a decorative novelty item, invented by the British accountant Edward Craven Walker, the founder of Mathmos, in 1963. The lamp contains blobs of coloured wax inside a glass vessel filled with clear or translucent liquid; the wax rises and falls as its density changes due to heating from an incandescent light bulb underneath the vessel. The appearance of the wax is suggestive of pāhoehoe lava, hence the name. The lamps are designed in a variety of styles and colours.

Operation

A blue lava lamp

A classic lava lamp contains a standard incandescent bulb or halogen lamp which heats a tall (often tapered) glass bottle. A formula from 1968 U.S. patent consisted of water and a transparent, translucent or opaque mix of mineral oil, paraffin wax and carbon tetrachloride.[1]p. 2, line 30 The clear water and/or mineral oil can optionally be coloured with transparent dyes.

Common wax has a density much lower than that of water, and would float on top under any temperature. However, carbon tetrachloride is heavier than water (also nonflammable and miscible with wax), and is added to the wax to make its density at room temperature slightly higher than that of the water. When heated, the wax mixture becomes less dense than the water, because the wax expands more than water when both are heated.[1]p. 1, lines 40 & 45 It also becomes fluid, and blobs of wax ascend to the top of the device where they cool (which increases their density relative to that of the water) and then they descend.[1]p. 1, line 47 A metallic wire coil in the base of the bottle acts as a surface tension breaker to recombine the cooled blobs of wax after they descend.

Video of an orange lava lamp in operation

However, lava lamps made in China for the U.S. market since 1970 do not use carbon tetrachloride, because its use was banned that year due to toxicity.[2] The manufacturer (Haggerty) states that their current formulation is a trade secret.[3]

The underlying fluid mechanics phenomenon is a form of Rayleigh–Taylor instability.

The bulb is normally 25 to 40 watts. Generally it will take 45–60 minutes for the wax to warm up enough to form freely rising blobs, when operating the lamp at standard room temperature. It may take as long as 2 to 3 hours if the room is below standard room temperature.

Once the wax is molten, the lamp should not be shaken or knocked over or the two fluids may emulsify, and the fluid surrounding the wax blobs will remain cloudy rather than clear. Some recombination will occur as part of the normal cycle of the wax in the container, but the only means to recombine all of wax is to turn off the lamp and wait a few hours. The wax will settle back down at the bottom, forming one blob once again. Severe cases can require many heat-cool cycles to clear.

A ferrofluid can be used in place of wax.

In 2015 a new design that uses ferrofluid in place of wax was introduced into the market.[4]

History

Former Lava Lamp factory, at 1650 Irving Park Road, Chicago

A British accountant Edward Craven-Walker invented the lava lamp in 1963 after watching a homemade egg timer, which was made from a cocktail shaker filled with liquids, as it was bubbling on a stove top in a pub.[5] His U.S. Patent 3,387,396 for "Display Device" was filed in 1965 and issued in 1968.[1] Craven-Walker's company was named Crestworth and was based in Poole, Dorset, in the United Kingdom. Craven-Walker named the lamp "Astro", and had variations such as the "Astro Mini" and the "Astro Coach" lantern.

Mathmos won two Queens Awards for Export, as well as Best Multi-Media prize at the Design Week awards.[6]

In the 1990s, Craven-Walker, who had retained the rights for the rest of the world, took on a business partner called Cressida Granger. They changed the company name to Mathmos in 1992. Mathmos continues to make Lava Lamps and related products. Astro lavalamp was launched in 1963 and celebrated its 50th anniversary in 2013.[7] Mathmos lava lamps are still made in the original factory in Poole, Dorset.

Hazards

In 2004, a man from Kent, Washington was supposedly killed while attempting to heat up a lava lamp on a kitchen stove while closely observing it from only a few feet away. Heat from the stove built up pressure in the lamp until it exploded and a shard pierced his heart, causing fatal injuries.[8]

The circumstances of his death were later reenacted in a 2006 episode of the popular science television series MythBusters. The show found that even if shards of glass are not thrown with lethal velocity during such an attempt, the resulting spray of hot liquid from the lamp could easily cause severe burns to anyone nearby. The show also noted that the safety instructions clearly state that lava lamps should not be heated by any source other than the specifically rated bulbs and purpose-designed bases that are provided.[9]

See also

Notes

  1. 1 2 3 4 U.S. Patent 3,570,156 DISPLAY DEVICE, Edward C. Walker, Nov. 13, 1968
  2. ↑ "Toxicological Review of Carbon Tetrachloride" (PDF). U.S. Environmental Protection Agency. March 2010. EPA/635/R-08/005F
  3. ↑ Carmen Drahl. "Lava Lamps - A density lesson inspired the Woodstock generation". Chemical & Engineering News.
  4. ↑ Starr, Michelle. "Ferrofluid Makes the Lava Lamp Cool Again". cnet.com. Retrieved 2015-11-23.
  5. ↑ Abigail Tucker (March 2013). "The History of the Lava Lamp: At 50, the legendary relic of the college dorm room is still groovy after all these years". Smithsonian magazine. Retrieved February 28, 2013.
  6. ↑ http://www.mathmos.com/Our-story.html
  7. ↑ Lava lamp creators mark 50 years of 1960s icon, BBC News, Aug 2013
  8. ↑ Lava Lamp Death at Snopes.com; AP story (via Fox News)
  9. ↑ Mythbusters, Season 4, Episode 60: Earthquake Machine, first aired August 30, 2006.

External links

Wikimedia Commons has media related to Lava lamps.
This article is issued from Wikipedia - version of the Friday, April 22, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.