List of open-source software for mathematics
This is a list of open-source software to be used for high-order mathematical calculations. This software has played a huge role in the field of mathematics.[1] Open-source software in mathematics has become pivotal in education because of the high cost of textbooks.[2]
Computer algebra systems
A computer algebra system is a type of software set that is used in manipulation of mathematical formulae. The principal objective of a computer algebra system is to systematize monotonous and sometimes problematic algebraic manipulation tasks. The primary difference between a computer algebra system and a traditional calculator is the ability to deal with equations symbolically rather than numerically. The precise uses and capabilities of these systems differ greatly from one system to another, yet their purpose remains the same: manipulation of symbolic equations. Computer algebra system often include facilities for graphing equations and provide a programming language for the users' own procedures.
Axiom
Axiom is a general-purpose computer algebra system. It has been in development since 1971 by IBM, originally named scratchpad. Richard Jenks originally headed it but over the years Barry Trager who then shaped the direction of the scratchpad project took the project. Project scratchpad was eventually sold to a numerical group called Numerical Algorithms Group (NAG) and was renamed Axiom. After a failure to launch as a product, NAG decided to release it as a free software in 2001 with more than 300 man-years worth of research involved. Axiom is licensed under a Modified BSD license.
MAXIMA
This free software had an earlier incarnation, Macsyma. Developed by Massachusetts Institute of Technology in the 1960s, it was maintained by William Schelter from 1982 to 2001. In 1998, Schelter obtained the permission to release MAXIMA as an open-source software under the GNU General Public license. Subsequently, he released the source code to the world later that year. Since his passing in 2001, a group of MAXIMA enthusiasts have continued to provide technical support.
GAP
GAP was initiated by RWTH Aachen university, a research university of technology located in Germany in 1986. This was the case until in 1997, when they decided to co-develop GAP further with CIRCA (Centre for Research in Computational Algebra). Unlike MAXIMA and Axiom, GAP is a system for computational discrete algebra with particular emphasis on computational group theory. In March 2005 the GAP Council and the GAP developers have agreed that status and responsibilities of "GAP Headquarters" should be passed to an equal collaboration of a number of "GAP Centres", where there is permanent staff involvement and an element of collective or organizational commitment, while fully recognizing the vital contributions of many individuals outside those centers.
Cadabra
A Computer Algebra System designed for the solution of the field theory problems. An unpublished computational program written in pascal called Abra inspired this open-source software. Abra was originally designed for physicists to compute problems present in quantum mechanics. Its original author, a man named Kespers Peeters then decided to write a similar program in C computing language rather in pascal, in which he renamed it Cadabra. However, Cadabra has been written for a wider range of uses, it is no longer restricted to physicists.
CoCoA
CoCoA (COmputations in COmmutative Algebra) is an open-source software use for computing multivariate polynomials initiated in 1987. Originally written in Pascal, CoCoA was translated into C language.
Numerical analysis
Numerical analysis is an area of mathematics that creates and analyzes algorithms for obtaining numerical approximations to problems involving continuous variables. When an arbitrary function does not have a closed form as its solution, there would not be any analytical tools present to evaluate the desired solutions, hence an approximation method is employed instead.
Octave
Originally conceived in 1988 by John W. Eaton as a companion software for an undergraduate textbook, Eaton later opted to modify it into a more flexible tool. Development begun in 1992 and the alpha version was released in 1993. Subsequently, version 1.0 was released a year after that in 1994. Octave is a high level language with the primary intention in numerical computation.
Scilab
Inspired by the software named MATLAB, Scilab was initiated in the mid-1980s at the INRIA (French national Institute for computer science and control). François Delebecque and Serge Steer developed it and it was released by INRIA in 1994 as an open-source software. Since 2008, Scilab has been distributed under the CeCILL license, which is GPL compatible. In 2010, Scilab Enterprise was founded to provide even more support to the software.
SciPy
SciPy was developed in the python programming language to take advantage of Python's ability to handle large data sets.[3]
Gnuplot
Gnuplot in an open-source graphing program and has extensive graphing features, but it also has least squares fitting capabilities for a broad range of user defined functions in two and three dimensions. http://www.gnuplot.info/
Graph
Graph is an open-source 2D graphing program with some simple numerical analysis features including least squares fitting for a broad range of functions, computing derivatives, and computing integrals. https://www.padowan.dk/
AMoreAccurateFourierTransform
AMoreAccurateFourierTransform is an open-source program for computing Fourier transforms. It computes a discrete Fourier transform from a two column input file over a specified range of input and output values and writes the results to an output file. https://sourceforge.net/projects/amoreaccuratefouriertransform/ [4]
Statistics
Statistics is the study of how to collate and interpret numerical information from data. It is the science of learning from data and communicating uncertainty. There are two branches in statistics: ‘Descriptive statistics’’ and ‘’ Inferential statistics
Descriptive statistics involves methods of organizing, picturing and summarizing information from data. Inferential statistics involves methods of using information from a sample to draw conclusions about the Population.
R
R is both a language and software used for statistical computing and graphing. R was originally developed by Bell Laboratories (Currently known as Lucent Technologies) by John Chambers. Since R is largely written in C language, users can use C or C++ commands to manipulate R-objects directly. Also, R runs on most UNIX platforms. R is currently part of the Free Software Foundation GNU project.
Demetra+
Demetra is a program for seasonal adjustments that was developed and published by Eurostat – European Commission under the EUPL license.
Multipurpose mathematics software
Such software were created with the original intent of providing a math platform that can be compared to proprietary software such as MATLAB and MATHEMATICA. They contain multiple other free software and hence have more features than the rest of the software mentioned.
SageMath
SageMath is designed partially as a free alternative to the general-purpose mathematics products Maple and MATLAB. It can be downloaded or used through a web site. SageMath comprises a variety of other free packages, with a common interface and language.
SageMath was initiated by William Stein, of Harvard University in 2005 for his personal project in Number Theory. It was originally known as ‘’HECKE and Manin’’. After a short while it was renamed SAGE, which stands for ‘’Software of Algebra and Geometry Experimentation’’. Sage 0.1 was released on 2005 and almost year later Sage 1.0 was released. It already consisted of Pari, GAP, Singular and MAXIMA with an interface that rivals that of Mathematica.
DataMelt
DataMelt was initially written by S. Chekanov in 2005 for High-energy physics. The original name was JHepWork, but later it was renamed to SCaViS and then to DataMelt. The main idea was to build a multi-purpose computational environment that is fully multiplatform and combine the best open-source Java libraries. DataMelt uses high-level programming languages, such as Jython (Python implemented in Java), Groovy, JRuby, but Java coding can also be used to call numerical and graphical libraries. The main source of the documentation is the book "Scientific Data analysis using Jython Scripting and Java",[5] but the online manual is also available.
MathBuntu
MathBuntu is a script for installing a large collection of mathematics-related software and textbooks for Ubuntu or Kubuntu operating systems.[6]
References
- ↑ David Joyner; William Stein (November 2007). "Open Source Mathematical Software" (PDF). American Mathematical Society. Retrieved 11 June 2013.
- ↑ Russell Herman; Gabriel Lugo (24 May 2008). "OPEN SOURCE RESOURCES FOR TEACHING AND RESEARCH IN MATHEMATICS" (PDF). University of North Carolina Wilmington. Retrieved 11 June 2013.
- ↑ "Visualizing big data".
- ↑ A More Accurate Fourier Transform, E Courtney and M Courtney, Data Analysis, Statistics, and Probability, Cornell University Library, 2015.
- ↑ Chekanov, S. V. (2010). Scientific Data analysis using Jython Scripting and Java. Springer-Verlag. p. 497. ISBN 978-1-84996-286-5.
- ↑ "Matbuntu (home page)". Retrieved 2015-07-02.