Mazda B-Series

Mazda B-Series
Overview
Manufacturer	Mazda
Production	1961–2006
Chronology
Successor	Mazda BT-50

The Mazda B-Series is a pickup truck that was first manufactured in 1961 by Mazda. Since the launch of the B-Series, Mazda has used the engine displacement to determine each model's name; the B1500 had a 1.5 L engine and the B2600 had a 2.6 L engine. In Japan, the name Mazda Proceed was used for the compact pickup. Other names used for this line include Mazda Bravo (Australia), Mazda Bounty (New Zealand), Mazda Magnum / Thunder / Fighter (Thailand), and Mazda Drifter (South Africa).

Mazda's partnership with Ford resulted in both companies selling this vehicle under different names; Ford called its version Ford Courier, and later the Ford Ranger. The Mazda B-Series and Ford Ranger models sold in North America were developed by Ford, whereas models sold elsewhere under the same badge were engineered by Mazda.

First generation (1961–1965)

First generation
The first B1500 model: top left is the original truck, to the right the "Pickup", bottom left is the double-cab truck and on the bottom right is the "Light Van".
Overview
Production	1961–1965
Assembly	Japan: Hiroshima
Body and chassis
Body style	2-door pickup truck 2-door double-cab pickup truck 2-door double-cab coupé utility 2-door van
Layout	Front-engine, rear-wheel-drive
Powertrain
Engine	1.5 L UA OHV I4
Dimensions
Wheelbase	2,495 mm (98.2 in) (BUA) 2,590 mm (102.0 in) (BUB61)
Length	4,150 mm (163.4 in) (BUA61) 4,245 mm (167.1 in) (BUB61)

The Mazda B-Series bonnet truck was introduced in Japan in August 1961 as the B1500 (BUA61). This model was the only Japanese market model to be badged under the B-Series naming scheme, i.e. B1500. The BUD61 (second generation) that followed was the first model of the long-running "Proceed" series sold in Japan. It had a 1484 cc OHV water-cooled engine with wet sleeve cylinders which produced 60 PS (44 kW; 59 hp), and a one-ton payload. This model also had a torsion bar front/leaf spring rear suspension, which was advanced for its time, giving it a relatively smooth ride. The B1500 was remodeled between late 1962 and September 1963; it received a new chassis code, BUB61.^[1] The BUB61 was more spacious; its cabin was extended by 80 mm (3.1 in) and it had a stretched body and wheelbase. The BUB61 had a new, upside-down, trapezoidal grille instead of the earlier full-width unit, with thirteen bars rather than nine, turn signals on the fenders, and more chrome trim—including a decor strip on the side.^[2]

In addition to the standard two-door "styleside" pickup truck body, a double-cab truck and a similar double-cab version called the "pickup", which had a fully integrated coupé utility body rather than the separate bed of the truck versions were produced. The "pickup" model was based on the light van; it had a two-door van model with a fold-down tailgate and an electrically powered window, which was rare in the Japanese market at the time.^[3] The light van (BUAVD) was introduced in September 1962, and two double-cab models following shortly after. These three models were built on the shorter wheelbase chassis; when the longer chassis was introduced it was not deemed worthwhile to create new bodywork. These models were produced for only a few months.^[3] The B1500 was sleeker and considerably more powerful than its competitors in the Japanese market, but it was considerably more expensive and it failed to sell in the expected quantities.^[4]

Second generation (1965–1977)

Second generation
Mazda B1800 (US)
Overview
Also called	Mazda Proceed Mazda B1500/1600/1800 Mazda Rotary Pickup Ford Courier
Production	1965–1977
Assembly	Japan: Hiroshima New Zealand
Body and chassis
Body style	2-door truck
Layout	Front-engine, rear-wheel-drive
Powertrain
Engine	1.3 L TC I4 (BTA67) 1.5 L UA OHV I4 (BUD61) 1.6 L NA I4 (BNA61) 1.8 L VB I4 1.3 L 13B
Dimensions
Wheelbase	2650 mm
Length	4370 mm

The 1966 B1500/Proceed presented in October 1965 used the same 1,484 cc OHV I4 engine as its predecessor, with minor changes to the cylinder head and valves and the use of a downdraft carburetor instead of the sidedraft unit used on the models sold between 1961 and 1965. The UA engine now produced 72 PS (53 kW; 71 hp) at 5200 rpm.^[5] The chassis was now called the "BUD61"; it was longer than its predecessor and received new bodywork of a squarer design, and four headlights. In January 1971, a 1600 cc model with the chassis code BNA61 was introduced. This had 95 PS SAE in global markets;^[6] US brochures did not specify its power output and European importers claimed 75 PS (55 kW) DIN. In Japan, a minimum 100 PS (74 kW) (SAE gross) was claimed; the model was advertised in Japan as the "GT-Truck".^[7]

In March 1972, the Proceed 1300 with a smaller 1.3-liter engine was released and remained available in Japan until 1975. It had 87 PS (64 kW) in SAE gross but was advertised as a GT-truck. The B1500 was the first Japanese pickup truck to be assembled in New Zealand from CKD kits. Assembly started in 1967 at Steel's Motor Assemblies, which also built the Toyota Corona and later became Toyota New Zealand's Christchurch plant after a government order for 672 units. The model remained in local assembly at various plants for several generations.

The B-Series was introduced to the United States with the 1972 B1600. In 1974, the similar rotary-powered Rotary Pickup was released in the US. The engine was enlarged to 1.8-liters for 1975's B1800, a model that had been available to Canadian customers since around 1970. It was known in the Japanese market as the "Proceed", where it was also sold as the Ford Courier. Its strong sales in the US market—mostly with Ford badging—relieved Mazda's pressing cash flow troubles in the period following the 1970s energy crisis.^[8]

Engines:

• 1972-1975 – 1.3 L (1272 cc) TC I4 (BTA67)
• 1965-1971 – 1.5 L (1484 cc) UA OHV I4 (BUD61)
• 1971–1976 – 1.6 L (1586 cc) NA I4 (BNA61), 95 PS (70 kW) SAE at 6000 rpm
• 1970–1977 – 1.8 L (1796 cc) VB I4 (BVD61), 98 hp (73 kW) SAE at 5500 rpm (1970, Canada)^[9]
• 1974–1977 – 1.3 L (654 cc x 2) 13B (PA136/SPA136)

Rotary Pickup

Mazda Rotary Pickup

The Rotary Pickup (REPU) was the world's first and only Wankel-engined pickup truck. It was sold from 1974 to 1977 and appears to only have been available in the US and Canada.^[10] The Rotary-Engined Pickup (REPU) had a four-port 1.3-liter 13B four-barrel carbureted engine,^[11] flared fenders, a battery mounted under the bed, a different dash, a front grille, and round taillights.

It is estimated that just over 15,000 units were built. Most were made for the 1974 model year (PA136 chassis), but the effect of the energy crisis on sales caused Mazda to restamp many of the 1974 models with a prefix "S", designating them as 1975 models; (SPA136). Approximately 700 units were built for the 1976 model year. Mazda invested in a moderate redesign for the 1977 model (PA236), updating its electrical systems, adding 4 inches (100 mm) cab stretch for increased comfort, and adding a five-speed manual transmission with a different differential gearing. About 3,000 units were manufactured, after which the REPU was discontinued due to poor sales.

Road & Track magazine was impressed with its "smooth, quiet power" and "nice" interior.^[12] The vehicle retailed for about US$3,500 (equivalent to $16,794 in 2015); its observed fuel economy was 16.5 miles per US gallon (14.3 L/100 km; 19.8 mpg_-imp). Most of the trucks are found on the west coast of the US; they continue to be sought out by enthusiasts. Like many Mazda rotary vehicles, the REPU was raced. Its most notable finish was an overall victory at the 1975 SCCA Mojave 24 Hour Rally, where it was driven by Malcolm Smith and Jack Sreenan.

Ford Courier

Ford Courier

The first generation Ford Courier was introduced for the 1972 model year and sold for a little over US$3,000 (equivalent to $16,971 in 2015) when introduced—close to the price of a Ford F-100. The Courier was manufactured by Toyo Kogyo (Mazda),^[13] and imported and sold by Ford Motor Company as a response to the unforeseen popularity of the small Toyota and Nissan (Datsun) pickups among young buyers in the West. Like the other mini-pickups of the time, it featured a sub-2.0-liter, four-cylinder engine, a four-speed manual transmission, rear wheel drive, a load capability of 1,400 lb (635 kg), and was fairly inexpensive compared to full-size pickups of the time. To circumvent the 25 percent chicken tax on light trucks, Couriers like Chevrolet LUV's were imported in "cab chassis" configurations, which included the entire light truck without the cargo box or truck bed, and were only subject to a 4 percent tariff.^[14] Subsequently, a truck bed would be attached to the chassis and the vehicle could be sold as a light truck.

The body styling was effectively that of the related Mazda B-Series, but its frontal treatment was unique; its grille was designed to emulate that of the larger Ford F-Series and large, single headlights were fitted instead of the B-Series' smaller twin units. When the Courier was introduced, it was supplied with a 1.8-liter overhead cam engine that produced 74 hp (55 kW) at 5,070 rpm and 92 lbf·ft (125 N·m) at 3,500 rpm. A four-speed manual transmission was standard; a three-speed automatic option was also offered. A five-speed manual option was added in 1976.

Badging was changed several times in the first generation of the series. In 1972, the tailgate read "Ford Courier" in large, raised letters; there was a small "Courier" badge on the front of the hood. From 1973 until 1976, the hood badging read "Ford". In 1973, the tailgate read "Courier" in large letters, with a small "Ford" badge on the upper left. In 1974, it read "Ford" in large letters, with a small "Courier" badge on the lower right. In 1976, the cab was lengthened by 3 inches (76 mm) and extra trim was added to the grille.

Third generation (PE/UC/UD; 1977–1985)

Third generation
Overview
Also called	Ford Courier Mazda Proceed
Production	April 1977–1985
Assembly	Japan: Hiroshima, Japan Colombia: Bogotá Iran: Tehran (Bahman Group)
Body and chassis
Body style	2-door pickup, standard and long bed
Layout	Front-engine, rear-wheel-drive
Powertrain
Engine	1.6 L NA I4 1.8 L VC I4 1.8 L VB I4 (US) 2.0 L MA I4 2.0 L FE I4 2.2 L S2 diesel I4
Transmission	4/5-speed manual 3-speed automatic
Dimensions
Wheelbase	2,715 mm (106.9 in) (SWB) 2,865 mm (112.8 in) (LWB)
Length	4,445 mm (175.0 in) (SWB) 4,740 mm (186.6 in) (LWB)

The model's third generation was introduced in April 1977 as the PE chassis for the Proceed 1600.^[15] The Japanese model had a claimed 97 PS (71 kW) and a top speed of 140 km/h (87 mph). The new model was more comfortable than the previous; it had a woodgrain dashboard and other luxuries. Outside Japan it was sold as the B1600 and later as the B1800, which was originally sold only in North America. In the US for the 1980 model year, it was sold as the B2000, which used a 2.0-liter F/MA engine, replacing the B1800. The diesel 2.2-liter B2200 was sold from 1981 with the chassis code UD.^[16] In the US, the 1984 B2000 continued to be sold through 1985; the next generation only appeared as a "1986". The 2.0-liter version was called PE2M6/M7 until 1981—"6" for the short wheelbase, "7" for the long bed—after which it had the chassis code UC. In Japan, this truck was discontinued in October 1979 because commercial customers preferred vans over the less space-efficient, bonneted trucks.

1983 Mazda B2200 (UD)

The B2000 was also available in a long-bed version with a longer wheelbase and rear overhang, which was given the model name Sundowner in some markets—a reference to nomadic Australian herders who would make camp wherever they were at sundown. The regular model code UC11 was changed to UC21 when it was fitted with a long bed. The chassis coding system used for the US market in 1981 when a standardized VIN code was introduced. This change led to a second coding system, complicating the identification and grouping of these trucks. The B-Series was redesigned for 1983 and was replaced in January 1985. By this time, 1.8 million Mazda B-series trucks had been built since 1961.^[17]

In Australia and New Zealand, the Courier was a compact pick-up built for Ford by Mazda in Japan.^[18] It was first offered on the Australian market in 1979.^[19] Both Mazda and Ford versions for New Zealand were assembled locally.

Engines:

• 1972-1975 – 1.6 L (1586 cc) NA I4 (PE2N), 97 PS (71 kW) JIS at 5700 rpm^[15]
• 1976-1978 – 1.8 L (1769 cc) VC I4 (PE2V),^[20] 84 hp (63 kW) at 5000 rpm (UK)^[21]
• 1977-1979 – 1.8 L (1796 cc) VB (US only?)
• 1979-1984 – 2.0 L (1970 cc) MA I4, 77 hp (PE2M, UC)
• 1982-1984 – diesel 2.2 L (2209 cc) S2 I4, 59 hp (UD)

Ford Courier

1979 Ford Courier

In 1977, the Courier was redesigned and various new options were made available. The truck was available with front disc brakes and a Ford-built 2.3-liter engine option, which was the same engine used in the Ford Pinto and Mustang II. The key feature distinguishing the Courier from Mazda's B-Series was the single headlights, although with park and indicator lights were placed inset starting in 1978. 1977 models retained the turn signal lights in the bumper.^[22] In 1979, the base model engine was increased in size to 2.0-liters. The optional Ford 2.3-liter engine was produced in Brazil.^[22]

The Courier was never available with a diesel engine in the US. However, the 1982 Mazda B2200 was available with the S2, a Perkins-built 4.135, 2.2-liter four-cylinder diesel engine, producing 59 hp (44 kW) at 2,100 rpm. This diesel engine was available for the 1983 and 1984 Ford Ranger; for the 1985 to 1987 Ford Rangers it was replaced with the 2.3-liter 4D55T turbo diesel.^[22]

1985 Ford Courier camper (facelift, New Zealand)

The Courier continued to be sold in North America until the model year 1982, when power steering was added. For 1983, Ford of North America introduced its own Ford Ranger to fill its compact truck segment, which replaced the Courier in the US and Canadian markets.^[22] In other markets such as Australasia, this generation of Courier continued to be sold until 1985, when the next generation was introduced. Australian models were redesigned in 1982 or 1983.

Electric variants

Between 1979 and 1982, a number of electric Ford Couriers were produced. Jet Industries purchased "vehicle gliders"—Ford Courier bodies without engines, and fitted them with a series-connected direct current motor and lead-acid accumulators; they labeled the vehicles the Jet Industries ElectraVan 750. These were sold mainly as service trucks, generally to local government departments. They had a top speed of around 70 mph (113 km/h), and covered 50 to 60 miles (80 to 97 km) on a full charge. A number of these vehicles still exist, usually with upgraded motor control systems and higher-voltage battery packs.^[22]

Fourth generation (UF; 1985–1998)

Fourth generation
Overview
Also called	Ford Courier (pickup) Ford Raider (wagon) Ford Marathon Mazda Bravo Mazda Fighter Mazda Magnum Mazda Proceed
Production	1985–1998
Assembly	Japan: Hiroshima Colombia: Bogotá South Africa: Pretoria Zimbabwe: Willowvale (WMMI)
Body and chassis
Body style	2-door pickup 4-door pickup 4-door wagon
Layout	Front-engine, rear-wheel-drive Front-engine, four-wheel-drive
Related	Mazda Proceed Marvie
Powertrain
Engine	2.0 L FE I4 2.2 L F2 I4 2.6 L G54B I4 (Mitsubishi) 2.6 L G6 I4 2.2 L R2 diesel I4 2.5 L WL-T td I4
Transmission	5-speed manual 4-speed automatic
Dimensions
Wheelbase	108.7 in (2,761 mm) 117.5 in (2,984 mm) 109.3 in (2,776 mm) 118.1 in (3,000 mm)
Length	182.7 in (4,641 mm) 198.8 in (5,050 mm)
Width	65.7 in (1,669 mm) 67.1 in (1,704 mm)
Height	61.8 in (1,570 mm) 61.6 in (1,565 mm) 66.1 in (1,679 mm) 65.9 in (1,674 mm)

A new Proceed/B-Series (UF) was introduced in January 1985; it was produced until June 1999.^[16] A five-speed manual transmission was the primary choice in most markets, with options of a four-speed automatic transmission option and part-time four wheel drive. The 2.6-liter, Mitsubishi-powered B2600 was introduced in 1986. 1987 saw the Mazda inline-four engine enlarged to 2.2-liters in the B2200; the smaller engine was phased out of the North American markets after that year. In 1988, the Mitsubishi engine was replaced with a new family of Mazda powerplants. This generation also returned to the Japanese market as the "Proceed", where it was marketed mostly as a "lifestyle" truck.

From 1991, an SUV/RV version of this generation was manufactured and sold as the Proceed Marvie; this was sold as the Ford Raider in Australia. The Proceed Marvie had a UV chassis code. A similar version of the vehicle was developed in Thailand, where it was sold as a version of the Mazda B-series. In 1988, the larger Mitsubishi carbureted engine was replaced with Mazda's more powerful, 2.6-liter, four-cylinder, fuel-injected engine. The new model was named B2600i—"i" for injection. Both Mazda B-series and the Ford Courier versions were assembled from CKD kits in New Zealand.

In South Africa, South African Motor Corporation (SAMCOR)—now Ford SA—fitted the B-Series with the 3.0- and later the 3.4-liter Ford Essex V6 as a range-topping engine option. The Essex engine was produced at Ford's Struandale engine plant in Port Elizabeth. In Zimbabwe, the B-series was assembled at the Willowvale Mazda Motor Industry plant in Willowvale, Harare where it was fitted with the 1.6 and 1.8-liter engines.

Engine options:

• B2000
  • 1986–1987 – 2.0 L (1998 cc) FE I4, 80 hp (60 kW)
• B2200
  • 1987–1993 – 2.2 L (2184 cc) F2 I4, 85 hp (63 kW) (Carb)
  • 1992–1993 – 2.2 L (2184 cc) F2 I4, 91 hp (68 kW), 118 lb·ft (160 N·m) (EFI)
  • 1985-199? – 2.2 L (2184 cc) R2 I4, 70 hp (52 kW), 105 lb·ft (142 N·m)
• B2500 (Thailand)
  • 1990–1996 – 2.5 L (2555 cc) 4JA1 I4, 90 hp (67 kW), 128 lb·ft (174 N·m)
• B2600
  • 1986–1988 – 2.6 L (2555 cc) G54B I4, 102 hp (76 kW), 146 lb·ft (198 N·m)
  • 1988–1993 – 2.6 L (2606 cc) G6 I4, 121 hp (90 kW), 149 lb·ft (202 N·m)
• B3000 (South Africa)
  • 1993–1997 – 3.0 L (2993 cc) Essex V6 89 kW (121 PS; 119 hp)
• B3400 (South Africa)
  • 1997–2000 – 3.4 L (3376 cc) Essex V6 108 kW (147 PS; 145 hp)

North America

Upon its North American debut in 1986, the B2000 was very well received by automotive critics. It was praised for its comfortable ride, smooth handling, and general car-like feel despite its ability to perform those tasks required of a truck.

For the 1986–1993 model years, there were mainly three trim levels available in North America: Base, SE-5, LX, and LE-5. The base model came with standard 14-inch steel wheels and not much else besides the basics (this did not include a rear step bumper). The SE-5 was the "sporty" trim level, with added features such as a tachometer, side-mounted truck mirrors, a rear step bumper, an AM/FM stereo, sporty white/black wheels, white-lettered Bridgestone SF Radial tires (which have long since been discontinued), and a prominent stripe graphic kit, the latter being the most easily distinguishable feature of the SE-5. The LX was the more luxurious trim level, with standard features that made it the most well-equipped trim line of the bunch. Such added features included air conditioning, power steering, power brakes, cruise control, AM/FM stereo with cassette deck and equalizer, center console, locking glove box, and chrome trim throughout (interior door handles and window cranks, taillight bezels, chrome added trim on the sides of the body, a chrome rear step bumper, a chrome strip on the front bumper, and the same steel wheels that came with the SE-5 but with a chrome finish). For the 1990 model year, the LX trim level was replaced with the LE-5, which combined a hybrid of styling and features from both the LX and SE-5.

The beefy B2600i 4x4 model had its own styling distinctions, such as a three-spoke steering wheel, fender flares, a wider front bumper, and mud guards. The B2600i also came with a fuel-injected Mitsubishi engine, which was added in response to complaints about the B2000's lack of power when compared to other trucks in its class.

Although the Mazda B-Series remained largely unchanged in appearance throughout its eight-year run in the North American markets, there were minor changes here and there. For instance, 1986 was the only year that the Mazda B-Series retained a small chrome/white "MAZDA" emblem on its grille; in 1987, it was changed to a larger painted plastic piece to match the colors of the grille itself, and this remained unchanged throughout the remainder of its run. The 1990 model year saw the first major refresh in the B-Series: the front bumper and grille, which had been painted a dark metallic gray with light silver headlight bezels from 1986–1989, were changed to black with light silver headlight bezels. 1990 also brought the upgrade of a new and more modern alloy style wheel for the upper trim levels. Perhaps the most noticeable difference throughout the years was the gradual disappearance of the SE-5's stripe graphics. In 1986, the kit (which only came in a grayscale color scheme) covered a large portion of the sides of the truck, with lower and upper portions of the body being taken into account. In 1987, the SE-5's stripe kit was reduced to a much more simple set of lines running along the lower portions of the body and coming upwards towards the taillights where they read "SE-5". By 1989, the stripes had been reduced even more, with new gradient-style graphics starting from the doors and running towards the back.

For the North American markets, Mazda spent more than US$100 million to design and develop the 1986–1993 B-Series trucks to meet consumer demands. For the 1994 model year, to save costs related to the chicken tax, Mazda introduced a rebadged version of the Ford Ranger, which was produced at Ford's Twin Cities Assembly Plant in Minnesota, and Edison Assembly in New Jersey. Because of declining sales and a lack of significant updates to its parent platform, the Ford-built B-Series was discontinued after the 2009 model year. The North American Ranger was discontinued at the end of 2011 with the closure of the Twin Cities plant.^[23]

Ford Courier / Raider

From 1991 to 1997^[24] a badge-engineered version of the Mazda Proceed Marvie wagon was sold as the Ford Raider.^[25] Like the Mazda version, it was an SUV/MPV based on the Proceed/B-Series/Ranger/Courier.

• 

  Early model Mazda Proceed Marvie (Japan)

• 

  Late model Mazda Proceed Marvie (Japan)

• 

  Mazda Proceed pickup (Japan)

• 

  Ford Courier (pre-facelift)

• 

  Ford Raider (pre-facelift)

• 

  Mazda Bravo (facelift)

• 

  Ford Courier (facelift)

• 

  Thai market Mazda B2500 Wagon

Fifth generation (UN; 1998–2006)

Fifth generation
Overview
Also called	Mazda Bravo Mazda Fighter Mazda Proceed Ford Courier (pickup) Ford Everest (wagon) Ford Ranger (pickup)
Production	1998–2006
Assembly	Japan: Hiroshima Colombia: Bogotá Philippines: Santa Rosa, Laguna[26] South Africa: Pretoria[27] Taiwan: Zhongli Thailand: Rayong (AAT) Vietnam: Hai Duong (Ford Vietnam)[28] Zimbabwe: Willowvale (WMMI)
Body and chassis
Class	Compact pickup truck Mid-size SUV (Ford Everest)
Body style	2-door pickup 2-door pickup (extended cab) 4-door "Freestyle" pickup (suicide rear doors) 4-door pickup 5-door wagon (Ford Everest)
Layout	Front-engine, rear-wheel-drive Front-engine, four-wheel-drive
Powertrain
Engine	2.2 L F2 I4 2.6 L G6E I4 2.5 L WL diesel I4 2.5 L WL-T TD I4

Mazda B2500 (pre-facelift)

Ford Ranger (pre-facelift)

Ford Courier (facelift)

In the 1998 model year, Mazda renewed its B-Series for international markets. Production at the AutoAlliance Thailand plant began in May 1998.^[29] It has the chassis code "UN".^[16] This model was also sold as the Ford Ranger in Europe and Asia and as the Ford Courier in Australia and New Zealand. Production also began that year at the Ford Motor Company Philippines plant. CKD versions were also assembled in South Africa and Ecuador.

The truck was sold in more than 130 countries under a variety of names. It was called the Fighter and Ranger in Southeast Asia—except in Singapore where it was called the Proceed—the Mazda Bounty and Ford Courier in New Zealand, the Mazda Bravo in Australia, and the Mazda Drifter in South Africa. The B2600/B2200s sold in Venezuela and nearby Latin American countries were assembled in Colombia by Compañía Colombiana Automotriz S.A. (CCA). They had a 2.6-liter inline-four engine, four-wheel-drive model and an entry level model with a 2.2-liter inline-four with rear-wheel-drive. In 2002, a "Freestyle" model with rear suicide doors became available on this platform. The rest of the range was revised in 2002 and 2004. These models are unrelated to the Mazda B-series and Ford Ranger models in North America.

Ford Everest

Ford Everest

The Ford Everest or Endeavour is a midsized SUV version of the Ford Ranger that shares more than 30 percent of its components with the donor pickup truck model. The concept was similar to the Mazda Proceed Marvie and its Ford Raider twin sold in the 1990s based on the previous generation Mazda B-Series. It was a four-door SUV, but in similar fashion to the original Toyota 4Runner of the cargo area having a removable top.

The Everest was sold in Asia, Central America and the Bahamas. The Everest was introduced in March 2003; it was built at the AutoAlliance Thailand plant in Rayong,^[30] and as CKD kits in Chengalpattu, India;^[31] Zhongli, Taiwan and Hai Duong, Vietnam.^[32] In India, the Everest was called the Ford Endeavour.

This Everest had its origins in the Ford Ranger, which was built for the Southeast Asian markets at the Rayong plant. Its underpinnings remained very much those of a pickup truck, while its engine was a Mazda-derived unit used for its low cost, fuel efficiency and emissions, which met the markets' standards. A Hiroshima-based design team developed the Everest/Endeavour to suit developing markets. In 2006, the Everest, the Ford Ranger and Mazda B-Series pickups were replaced with the new Mazda BT-50 and its derivatives. While the Mazda versions introduced the new "BT-50" name, Ford versions continued under the names "Ranger" for pickups and "Everest" for wagons.

The Everest came with three-row seating in rear- or four-wheel drive, with either a 2.5-liter diesel or 2.6-liter petrol engine. It rides on a 2,860 mm (112.6 in) wheelbase.

Engines:

• 2.5-liter WLT water-intercooled turbo-diesel, 88 kW (118 hp) and 277 Nm (204 lb·ft)
• 2.6-liter G6E 3-valve petrol, 90 kW (121 hp) and 206 N·m (151 lb·ft)

References

1. Bulmer, Ged (2013-03-13). "Classic Metal: B1500 Styleside". Unique Cars. Australia: Bauer Trader Media. Retrieved 2013-09-11.
2. Ozeki, Kazuo (2007). 日本のトラック・バス 1918~1972 [Japanese Trucks and Buses 1918-1972:] (in Japanese). Tokyo: Miki Press. p. 143. ISBN 978-4-89522-494-9.
3. Ozeki, pp. 144-145
4. Ozeki, p. 143
5. Ozeki, p. 156
6. Mazda B1600 Pickup/Bakkie (brochure) (in English and Afrikaans), Japan: Toyo Kogyo Co., Ltd., 1973, p. 4
7. GT-TRUCK: New プロシード1600 [New Proceed 1600] (catalog) (in Japanese), Toyo Kogyo, January 1971, p. 8
8. Yamaguchi, Jack K. (1985), Lösch, Annamaria, ed., "Japan: Lucrative Contraction", World Cars 1985 (Pelham, NY: The Automobile Club of Italy/Herald Books): 49, ISBN 0-910714-17-7
9. Mazda 1800 Pickup (brochure), Burnaby, BC: Mazda Motors of Canada, 1970-06-01, p. 2
10. Club for Mazda REPU owners
11. MazdaREPU.com Mazda brochure
12. Road & Track, July 1974
13. Rechtin, Mark (2009-12-21). "For Mazda and Ford, breaking up is hard to do". Automotive News. Crain Communications. Retrieved 2013-01-18.
14. Ikenson, Daniel (June 18, 2003). "Ending the 'Chicken War': The Case for Abolishing the 25 Percent Truck Tariff" (PDF). Cato Institute. Retrieved 13 April 2016.
15. ニュープロシード 1600 [New Proceed 1600] (brochure), Toyo Kogyo Co., Ltd., April 1977, p. 8, 7704N
16. "B-Serie parts". Mister Auto. Retrieved 2013-09-11.
17. Ruiz, Marco (1986). 'The Complete History of the Japanese Car: 1907 to the Present. Rome: ERVIN srl. p. 136. ISBN 0-517-61777-3.
18. David Boyce, What Car Is That? in Australia and New Zealand, 1981, page 76.
19. Green Book Price & Model Guide, July–August 1983, page 99.
20. Mazda B1800 Pickup (Australia) (brochure), Toyo Kogyo Co., Ltd., 1977, p. 4, 7711S112-31
21. The Mazda B1800 Pickup (brochure), Tunbridge Wells, Kent, UK: Mazda Car Imports (GB), May 1981, B1800/81/5
22. "Courier Information". Ford Courier Collector. Retrieved 2010-11-29.
23. Levine, Mike. "Mazda Drops B-Series Pickup From U.S. Lineup". PickupTrucks.com. Retrieved 21 July 2011.
24. "Australian Car Guide: Ford Raider 4WD". eCars. Archived from the original on 2008-07-26.
25. "SEVS eligibility – Mazda Proceed". Retrieved 2010-11-20.
26. Sarne, Vernon (2012-06-27). "Ford makes 'business decision' to stop manufacturing cars in PH". Top Gear Philippines. Retrieved 2013-06-03.
27. "Facilities | Ford Motor Company Newsroom". Media.ford.com. Retrieved 2010-11-20.
28. "Facilities | Ford Motor Company Newsroom". Media.ford.com. Retrieved 2010-11-20.
29. "Facilities | Ford Motor Company Newsroom". Media.ford.com. Retrieved 2010-11-20.
30. "Ford. Ford in Thailand". Car-cat.com. Archived from the original on 2009-10-27.
31. "Ford. Ford in India". Car-cat.com. Retrieved 2010-07-31.
32. "Facilities | Ford Motor Company Newsroom". Media.ford.com. Retrieved 2010-07-31.