Morris Minor

This article is about the motor car manufactured by Morris Motors Limited from 1948 to 1972. For the Morris Minor manufactured by Morris Motors Limited from 1928 to 1933, see Morris Minor (1928). For the 1980s pop band, see Morris Minor and the Majors.
Morris Minor

Morris Minor MM 2-door saloon
Overview
Manufacturer Morris
Production 1948–71; 1,368,291 produced
Assembly Cowley, Oxford, England
Australia[1]
New Zealand[2]
Designer Sir Alec Issigonis
Body and chassis
Class Subcompact car
Layout FR layout
Dimensions
Wheelbase 86 in (2,184 mm)[3]
Length 148 in (3,759 mm)
Width 60 in (1,524 mm)
Height 60 in (1,524 mm)
Curb weight 1,708 lb (775 kg) (four-door saloon)
Chronology
Predecessor Morris Eight
Successor Morris Marina

The Morris Minor is a British car that debuted at the Earls Court Motor Show, London, on 20 September 1948.[4] Designed under the leadership of Alec Issigonis, more than 1.3 million were manufactured between 1948 and 1972 in three series: the MM (1948), the Series II (1952) and finally the 1000 series (1956).

Initially available as a two-door saloon and tourer (convertible), the range was expanded to include a four-door saloon in 1950, a wood-framed estate (the Traveller) from Oct.1953 and panel van and pick-up truck variants from May[5] 1953. It was the first British car to sell over one million examples[6] and is considered a classic example of automotive design,[7] as well as typifying "Englishness",[8][9][10][11][12]

Development

Origins

The Minor was conceived in 1941. Although the Nuffield Organization was heavily involved in war work and there was a governmental ban on civilian car production, Morris Motors' vice chairman, Miles Thomas, wanted to prepare the ground for new products to be launched as soon as the war was over.[13] Vic Oak, the company's chief engineer, had already brought to Thomas' attention a promising junior engineer, Alec Issigonis. Issigonis had been employed at Morris since 1935 and specialised in suspension design[14] but he had frequently impressed Oak with his advanced ideas about car design in general.[15] Issigonis had come to Oak's particular attention with his work on the new Morris Ten, which was in development during 1936/7. This was the first Morris to use unitary construction and was conceived with independent front suspension. Issigonis designed a coil-sprung wishbone system which was later dropped on cost grounds. Although the design would later be used on the MG Y-type and many other post-war MGs the Morris Ten entered production with a front beam axle. Despite his brief being to focus on the Ten's suspension Issigonis had also drawn up a rack and pinion steering system for the car. Like his suspension design this was not adopted but would resurface in the post-war years on the MG Y-type, but these ideas proved that he was the perfect candidate to lead the design work on a new advanced small car.

With virtually all resources required for the war effort, Thomas nonetheless approved the development of a new small family car that would replace the Morris Eight. Although Oak (and Morris' technical director, Sidney Smith) were in overall charge of the project it was Issigonis who was ultimately responsible for the design, working with only two other draughtsmen.[16] Thomas named the project 'Mosquito' and ensured that it remained as secret as possible,[17] both from the Ministry of Supply and from company founder William Morris (now Lord Nuffield), who was still chairman of Morris Motors and, it was widely expected, would not look favourably on Issigonis' radical ideas.[18]

Issigonis' overall concept was to produce a practical, economical and affordable car for the general public that would equal, if not surpass, the convenience and design quality of a more expensive car. In later years he summed up his approach to the Minor; that he wanted to design an economy car that "the average man would take pleasure in owning, rather than feeling of it as something he'd been sentenced to" and "people who drive small cars are the same size as those who drive large cars and they should not be expected to put up with claustrophobic interiors.[19]" Issigonis wanted the car to be as spacious as possible for its size and comfortable to drive for inexperienced motorists. Just as he would with the Mini ten years later, he designed the Mosquito with excellent roadholding and accurate, quick steering not with any pretence of making a sports car, but to make it safe and easy to drive by all.[20]

Design Features

Issigonis' design included the same ideas he had proposed for the Ten before the war:[19] Independent suspension and rack and pinion steering plus the continued use of unitary construction. In the case of the Mosquito Issigonis was inspired by the Citroën Traction Avant,[19] a car he greatly admired, and he proposed using torsion bars on each wheel, as on the Citroën rather than the coil spring system of before. The French car, launched in 1934, had also been an early example of rack and pinion steering.[21]

Nearly every feature of the Minor serves the joint aims of good roadholding and maximum interior space. For example, Issigonis specified 14-inch (35.5 cm) wheels for the Mosquito. These were smaller than any other production car of the time (the existing Morris Eight had 17-inch (43 cm) wheels).[19] These small wheels reduced intrusion into the cabin space and minimised unsprung mass for better ride comfort and stability. The wheels themselves were placed as far as possible in each corner of the Mosquito's floorpan for the same reasons. The same went for the placement of the engine, far towards the front of the engine compartment.[22] Most cars of the time had the engine somewhat behind the front axle line in the interests of achieving more balanced weight distribution but this meant that when laden with passengers cars often became severely tail-heavy, leading to unstable handling and oversteer. Putting the Mosquito's engine in the nose meant that when lightly laden the car was nose-heavy, leading to superior directional stability and when fully laden it achieved nearly equal weight balance, so handling and grip remained good regardless of the load carried.[23] Placing the engine forward also maximised cabin space.

The engine itself as proposed by Issigonis was also radical, being a water-cooled flat four unit. One of Miles Thomas' few restrictions on the Mosquito project was that it had to have an engine that would not fall foul of the British horsepower tax, which actually taxed cars via a formula relating to their engine cylinder dimensions. At the same time Thomas wanted the car to appeal to the all-important export markets, which had no such restrictions and generally favoured larger-engined cars. Issigonis' solution was the flat-four engine which could easily be produced in two versions - a narrow-bore 800cc version for the British market and a wide-bore 1100cc version for export.[24] Both versions would use identical parts save for the actual cylinder blocks (which could still be produced on the same machinery) and the pistons. The flat-four layout reduced the overall length of the engine, further increasing potential cabin space, and reduced the car's centre of gravity for improved handling.

Pre-production Changes

The engine was to prove a step too far for the Mosquito project. As the car approached completion in 1946 the war was over and the need for secrecy was both no longer necessary and impossible to maintain as more and more Morris staff and executives had to be involved to start production. Many were pessemistic about the radical car's prospects and especially the huge cost in tooling up for a design that shared no parts with any existing Morris product. Lord Nuffield himself took a strong dislike to both the Mosquito and Issigonis, famously saying that the prototype resembled "a poached egg'.[18] Lord Nuffield's preference was to continue production of the conventional Morris Eight, which had been very successful pre-war, with some minor styling and engineering improvements. He particularly objected to the Mosquito's expensive and unconventional engine design. Whatever Lord Nuffield's personal views, it was looking increasingly unlikely that all of the Mosquito's radical features could be implemented while maintaining an acceptable final purchase price and without incurring too much setup costs at the Cowley factory. There was also the matter of timing - there was a big rush by British manufacturers to get new models to market following the end of the War. It was known that Austin was working on an all-new but conventional car which would be launched in 1947. The Mosquito was proposed for launch in 1949 and that deadline was appearing increasingly unlikely due to the untried nature of many of the car's features. The Morris board insisted on launching the Mosquito at the first post-war British Motor Show in October 1948.

Several of Issigonis' proposals were reviewed - first the all-independent torsion bar suspension was changed for a torsion-sprung live rear axle and this was then substituted for a conventional leaf sprung arrangement. Proposals by Miles Thomas to offset the cost of making the flat-four engine by introducing sporting MG and upmarket Wolseley versions of the Mosquito were rejected and it became clear that the only way to overcome the personal and financial obstacles to the project was to adopt a lightly-revised version of the Morris Eight's obsolete sidevalve engine.[25] Miles Thomas resigned his position at Morris Motors over the debacle.[26] Despite the changes the fundamental principles of Issigonis' concept - a spacious cabin, small wheels at each corner, a forward-placed engine, rack and pinon steering and independent torsion bar front suspension - remained.

While Thomas had been battling for the Mosquito's future Issigonis had been settling the car's styling. Although in his later career he would be known for very functional designs Issigonis was heavily influenced by the modern styling of American cars, especially the Packard Clipper and the Buick Super.[23] A new feature was a low-set headlamps, integral with the grille panel (Issigonis had originally sketched hidden lamps concealed behind sections of the grille, but these were never implemented). The original Mosquito prototype, which drew Lord Nuffield's 'poached egg' comment, was designed with similar proportions to pre-war cars, being relatively narrow for its length. In late 1947, with Cowley already tooling up for production, Issigonis was unhappy with the appearance of the car. He had the prototype cut lengthways and the two halves moved apart until it looked 'right'.[27] The production model was thus four inches (10 cm) wider than the prototype and, in keeping with Issigonis' design principles, this further improved interior space and roadholding. It also gave the car distinctive (and recognisably modern) proportions - contrast with the Austin A30, launched in 1952 but still recognisably pre-war in size and proportions). The last-minute change to the design required a number of workarounds - bumpers had already been produced, so early cars had ones cut in half with a four-inch plate bolted between the join.[25] The bonnet had a flat fillet section added to its centreline and the floorpan had two two-inch sections added either side of the transmission tunnel.[28]

From Mosquito to Minor

The last change made was to the car's name. It was widely expected that the Mosquito codename would also be the name of the production model. But Lord Nuffield disliked the name and Morris' marketing department wanted a reassuring name for what it worried would be an innovative, radical car that would be difficult to sell to a cautious public.[26] Instead the car was named the Minor, in reference to the Morris Minor of 1928, which had introduced a number of innovative features and had been the first four-wheeled car to sell for £100.

The new Morris Minor was launched at the British Motor Show at Earls Court in London on October 27, 1948. The original range consisted solely of a two-door saloon or a two-door tourer with a 918cc engine and a starting price of £358. At the same show Morris also launched the new Morris Oxford and Morris Six models, plus Wolseley variants of both cars, which were scaled-up versions of the new Minor, incorporating all the same features and designed with Issigonis' input under Vic Oak's supervision. Thus Issigonis' ideas and design principles underpinned the complete post-war Morris and Wolseley car ranges.[29]

Minor MM

Morris Minor MM

Morris Minor MM 2-door Saloon
Overview
Production 1948–53; 250,962 produced
Assembly
Body and chassis
Body style
Powertrain
Engine 918 cc Morris Sidevalve I4
Dimensions
Wheelbase 86 in (2,184 mm)[31]
Length 148 in (3,759 mm)

The original Minor MM series was produced from 1948 until 1953. It included a pair of four-seat saloons, two-door and (from 1950) a four-door, and a convertible four-seat Tourer. The front torsion bar suspension was shared with the larger Morris Oxford MO, as was the almost-unibody construction. Although the Minor was originally designed to accept a flat-4 engine, late in the development stage it was replaced by a 918 cc (56.0 cu in) side-valve inline-four engine, little changed from that fitted in the 1935 Morris 8, and producing 27.5 hp (21 kW) and 39 lbf·ft (50.3 N·m) of torque. This little engine pushed the Minor to just 64 mph (103 km/h) but delivered 40 miles per imperial gallon (7.1 L/100 km; 33 mpg-US). Brakes were four-wheel drums.[31]

Early cars had a painted section in the centre of the bumpers to cover the widening of the production car from the prototypes. This widening of 4 inches (102 mm) is also visible in the creases in the bonnet. Exports to the United States began in 1949 with the headlamps removed from within the grille surround to be mounted higher on the wings to meet local safety requirements. In 1950 a four-door version was released, initially available only for export, and featuring from the start the headlamps faired into the wings rather than set lower down on either side of the grille.[32] The raised headlight position became standard on all Minors in time for 1951.[32] From the start, the Minor had semaphore-type turn indicators, and subsequent Minor versions persisted with these until 1961.[6] An Autocar magazine road test in 1950 reported that these were "not of the usual self-cancelling type, but incorporate[d] a time-basis return mechanism in a switch below the facia, in front of the driver".[32] It was all too easy for a passenger hurriedly emerging from the front passenger seat to collide with and snap off a tardy indicator "flipper" that was still sticking out of the B-pillar, having not yet been safely returned by the time-basis return mechanism to its folded position. Another innovation towards the end of 1950 was a water pump (replacing a gravity dependent system), which permitted the manufacturer to offer an interior heater "as optional equipment".[32]

When production of the first series ended, just over a quarter of a million had been sold, 30 per cent of them the convertible Tourer model.

A 1,098 cc-engined tourer tested by the British magazine The Motor in 1950 had a top speed of 58.7 mph (94.5 km/h) and could accelerate from 0–50 mph (80 km/h) in 29.2 seconds. However, the 918 cc engine did 0–60 mph in 50+ seconds.[6] A fuel consumption of 42 miles per imperial gallon (6.7 L/100 km; 35 mpg-US) was recorded. The test car cost £382 including taxes.[33]

Minor Series II

Morris Minor Series II

Morris Minor Series II four-door saloon
Overview
Production 1952–56
269,838 produced
Assembly
Body and chassis
Body style
Powertrain
Engine 803 cc A-series I4

In 1952, the Minor line was updated with an Austin-designed 803 cc (49.0 cu in) overhead valve A-series engine, replacing the original side-valve unit. The engine had been designed for the Minor's main competition, the Austin A30, but became available as Austin and Morris were merged into the British Motor Corporation. The new engine felt stronger, though all measurements were smaller than the old. The 52 second drive to 60 mph (97 km/h) was still calm, with 63 mph (101 km/h) as the top speed. Fuel consumption also rose to 36 miles per imperial gallon (7.8 L/100 km; 30 mpg-US).

An estate version was introduced in 1952, known as the Traveller (a Morris naming tradition for estates, also seen on the Mini). The Traveller featured an external structural ash (wood) frame for the rear bodywork, with two side-hinged rear doors. The frame was varnished rather than painted and a highly visible feature of the body style. Commercial models, marketed as the Morris Quarter Ton Van and Pick-up were added in May 1953.[34] Rear bodies of the van versions were all steel. The 4-seat convertible and saloon variants continued as well.

The Motor magazine tested a four-door saloon in 1952. It reported a top speed of 62 mph (100 km/h) and acceleration from 0–50 mph (80 km/h) in 28.6 seconds. A fuel consumption of 39.3 miles per imperial gallon (7.19 L/100 km; 32.7 mpg-US) was recorded. The test car cost £631 including taxes.[35]

Engine: 1952–56: 803 cc A-Series inline-four, 30 hp (22 kW) at 4,800 rpm and 40 lbf·ft (54 N·m) at 2,400 rpm

A horizontal slat grille was fitted from October 1954,[36] and a new dashboard with a central speedometer was fitted.

269,838 examples of the Series II had been built when production ended in 1956.[36]

Minor 1000

Morris Minor 1000

1958 Morris Minor 1000 2-door saloon
Overview
Production 1956–71; 847,491 produced
Assembly
Body and chassis
Body style
Powertrain
Engine

The car was again updated in 1956 when the engine was increased in capacity to 948 cc (57.9 cu in). The two-piece split windscreen was replaced with a curved one-piece one and the rear window was enlarged. In 1961 the semaphore-style trafficators were replaced by the flashing direction indicators, these were US-style red at the rear (using the same bulb filament as the brake lamp) and white at the front (using a second brighter filament in the parking lamp bulb) which was legal in the UK and many export markets at the time (such as New Zealand). An upmarket car based on the Minor floorpan using the larger BMC B-Series engine was sold as the Riley One-Point-Five/Wolseley 1500 beginning in 1957: versions of this Wolseley/Riley variant were also produced by BMC Australia as the Morris Major and the Austin Lancer.

Minor Million

In December 1960 the Morris Minor became the first British car to sell more than 1,000,000 units. To commemorate the achievement, a limited edition of 350 two-door Minor saloons (one for each UK Morris dealership) was produced with distinctive lilac paintwork and a white interior. Also the badge name on the side of the bonnet was modified to read "Minor 1,000,000" instead of the standard "Minor 1000". The millionth Minor was donated to the National Union of Journalists, who planned to use it as a prize in a competition in aid of the union's Widow and Orphan Fund. The company, at the same time, presented a celebratory Minor to London's Great Ormond Street Hospital for Sick Children, but this car was constructed of cake.[37]

ADO59

The final major upgrades to the Minor were made in 1962. Although the name Minor 1000 was retained, the changes were sufficient for the new model to be given its own ADO development number. A larger version of the existing A-Series engine had been developed in conjunction with cylinder head specialist Harry Weslake for the then new ADO16 Austin/Morris 1100 range. This new engine used a taller block than did the 948 cc unit, with increased bore and stroke bringing total capacity up to 1,098 cc. Although fuel consumption suffered moderately at 38 mpg, the Minor's top speed increased to 77 mph (124 km/h) with noticeable improvements in low-end torque, giving an altogether more responsive drive. Other changes included a modified dashboard layout with toggle switches, textured steel instrument binnacle, and larger convex glove box covers. A different heater completed the interior upgrade, whilst the larger combined front side/indicator light units, common to many BMC vehicles of the time, were fitted to the front wings. These now included a separate bulb and amber lens for indicators while larger tail lamp units also included amber rear flashers.

Engines

Decline and replacement

During the life of the Minor 1000 model, production declined. The last Convertible/Tourer was manufactured on 18 August 1969,[38] and the saloon models were discontinued the following year. Production of the more practical Traveller and commercial versions ceased in 1972, although examples of all models were still theoretically available from dealers with a surplus of unsold cars for a short time afterwards. According to Newell (1997), 1.6 million Minors were made in total and Wainwright (2008) even claims that 1,619,857 Minors of all variants were ultimately sold.

The Minor was officially replaced on the Cowley production lines by the Morris Marina (ADO28), which was developed primarily as a response to Ford's top-selling (and in many respects, conservatively engineered) Escort. Building a mid-sized car capable of volume sales (particularly in the lucrative fleet-buying market) was becoming increasingly key in generating healthy profit margins, and was an issue BMC had consistently failed to address in the past.[39] The Marina was developed under the watchful eye of British Leyland management, and used a floor plan and running gear deliberately similar to the Minor to streamline production changeover and minimize the financial outlay associated with chassis development and retooling.[40]

The spiritual successor to the Morris Minor was arguably the ADO16 Austin/Morris 1100 range, which had been launched in 1962 and aimed at the same small family-car market (and actually replaced the Minor in some export markets such as Australia and New Zealand). The crisp styling, hydrolastic suspension and innovative front-wheel drive system (itself a "scaling-up" of the Mini principle) made ADO16 a worthy successor to the (in its day) strikingly forward-looking Minor. However, due to the British Motor Corporation's commitment to both the Morris factory at Cowley, and Austin plant at Longbridge – in addition to a healthy demand for both products – production of the two cars continued in parallel for nearly ten years. Ironically, production of ADO16 only outlasted that of the Minor by three years or so, before being axed in favour of the innovative, export-oriented yet under-developed Austin Allegro in 1974.[41]

Safety

Despite the four major updates of the Minor in its 23-year production run, very few actively designed "safety features" were ever engineered into the Minor's design. Provisions were made for seat belt fittings in the early '60s, but the rigid structure of the car's monocoque body made it dangerously unabsorbent to impact. For a short time in 1968, the thickness of the steel used in the bonnet and doors was decreased from 1.2 mm to 1.0 mm to act as a form of crumple zone, but as the wings continued to be made of 1.4 mm mild steel, the modification was pointless and ineffectual and was reversed in 1969 as it increased passenger compartment crush in collisions.

The Mark II model changed from the "lowlight" model to comply with Canadian lighting standards, with higher and brighter headlights to increase visibility in fog and during dark Canadian winters.

Australian models, and tourer models made in Britain and exported to Australia, featured safety glass windscreens and safety glass windows, to comply with local regulations. Australian models also had blinking indicator lights in addition to the standard trafficator arms on the indigenous Minor 1000.

Morris quarter ton van and pick-up

Morris Quarter Ton Van & Pick-up

Morris 6cwt Van
Overview
Also called
  • Morris 6cwt/8cwt Van & Pick up
  • Austin 6cwt/8cwt Van & Pick up
Production 1953–73[34]
Assembly
Body and chassis
Body style
Powertrain
Engine

Closed van and open flat-bed ("pick-up") versions of the Minor were built from 1953 until the end of production. They were designed for commercial use with small businesses, although many were also used by larger corporations. Van versions were popular with the General Post Office, the early versions of these (to around 1956) having rubber front wings to cope with the sometimes unforgiving busy situations in which they were expected to work. Both the van and the pickup differed from the monocoque construction of the Saloon and Traveller variants by having a separate chassis. They also differed in details such as telescopic rear dampers, stiffer rear leaf springs and lower-ratio differentials to cope with heavier loads.

The commercials versions were initially marketed as the Morris Quarter Ton Van and Pick-up with a Series III designation applied from 1956.[34] The names Morris 6cwt Van and Pickup was used following the introduction of the 1098cc engine in 1962 [34] and 8cwt versions were added in 1968.[34][42]

With Austin and Morris both part of BMC, the Minor-based Morris commercials were also marketed as the Austin 6cwt and Austin 8cwt.[43]

In popular culture and film

A white 1967 Morris Minor 1000 is driven by Nurse Gladys Emmanuel (Lynda Baron) in the comedy series, Open All Hours.[44]

A black 1957 Morris Minor 1000 makes a brief appearance alongside a yellow 1958 Austin Healey Sprite in the 1973 coming of age comedy-drama film American Graffiti.[45]

Morris Minor today

Morris Minor rally at Brooklands, Surrey

Today the Morris Minor and 1000 are among the best-served classic family-sized cars in the old vehicle movement and continue to gain popularity. The enduring affection for the "Moggie" (also a common British nickname for an undistinguished cat, or a Morgan) or "Morrie" (as it is often known in Australia and New Zealand) is reflected in the number of restored and improved Morris Minors currently running in Britain, Australasia and in India. In addition to more powerful engines, desirable improvements necessitated by the increase in traffic density since the Minor was withdrawn from volume production include the replacement of the original equipment drum brakes with discs. Other important upgrades include the 1,275 cc (77.8 cu in) version of the A-series engine, derided by Morris Marina enthusiasts as a key reason why many Marinas were scrapped, and the similarly sized Nissan A engine, which shares all common dimensions to the Morris Minor engine, except piston size. Top Gear presenter Jeremy Clarkson once stated that the Morris Minor is Britain's Volkswagen Beetle (although this was stated in a derogatory way rather than favourably). There is still a great parts backup for these cars, and parts are cheap compared to modern day cars.

Replacement panels for the Morris Minor were still being made in 2002 by the Durable Car Company in Sri Lanka.[46]

References

  1. ↑ Davis, Pedr (1986), The Macquarie Dictionary of Motoring, Australia, p. 337
  2. ↑ Webster, Mark (2002), Assembly: New Zealand Car Production 1921–98, Birkenhead, Auckland, New Zealand: Reed, p. 1, ISBN 0-7900-0846-7
  3. ↑ Cardew, Basil (1966). "Review of the 1966 Motor Show". Daily Express (London: Beaverbrook Newspapers).
  4. ↑ "60th Birthday Celebration at British Motor Industry Heritage Centre, Gaydon". UK: Morris Minor OC. Retrieved 9 October 2010.
  5. ↑ Paul Skilleter's book "The world's supreme small car Morris Minor"
  6. 1 2 3 Willson, Quentin (1995). The Ultimate Classic Car Book. DK Publishing, Inc. ISBN 0-7894-0159-2.
  7. ↑ Nominate England's greatest icon, (from BBC news.com) Quote: "Design classics like Alex Issigonis' Morris Minor car could be competing alongside great artworks like Constable's Haywain and pieces by JMW Turner"
  8. ↑ Pender, Karen (1995). The Secret Life of the Morris Minor. Goldmanstone, Dorset, UK: Veloce Publishing. p. 7. ISBN 1-874105-55-3.
  9. ↑ The Morris Minor, thought to typify Englishness, was first launched in London in 1948 From Daily Mail
  10. ↑ The Morris Minor: A British miracle Strange to say for something that acquired a reputation for essential Englishness Telegraph.co.uk
  11. ↑ Kathryn Hughes The Guardian, Saturday 6 December 2008 Article history quote: But if the Morris has a tendency to diminish physically as the years progress, culturally it has been busy laying down rich stores of fat. Indeed, so identified has the car become with a particular reading of Englishness
  12. ↑ Prince Frederick (29 December 2009). "Fifty-one, but still a Baby". The Hindu. Morris Minor models, believed to “typify Englishness”, were in the ascendant
  13. ↑ Bardsley, Gillian (2005). Issigonis: The Official Biography. Icon Books. p. 115. ISBN 9-781840-466874.
  14. ↑ Bardsley, Gillian (2005). Issigonis: The Official Biography. Icon Books. p. 85. ISBN 9-781840-466874.
  15. ↑ Bardsley, Gillian (2005). Issigonis: The Official Biography. Icon Books. p. 114. ISBN 9-781840-466874.
  16. ↑ Wainwright, Martin (2008). Morris Minor: The Biography. Aurum. p. 60. ISBN 9-781845-135096.
  17. ↑ Bardsley, Gillian (2005). Issigonis: The Official Biography. Icon Books. p. 117. ISBN 9-781840-466874.
  18. 1 2 Wainwright, Martin (2008). Morris Minor: The Biography. Aurum. p. 63. ISBN 9-781845-135096.
  19. 1 2 3 4 Bardsley, Gillian (2005). Issigonis: The Official Biography. Icon Books. p. 121. ISBN 9-781840-466874.
  20. ↑ Bardsley, Gillian (2005). Issigonis: The Official Biography. Icon Books. p. 302. ISBN 9-781840-466874.
  21. ↑ Wainwright, Martin (2008). Morris Minor: The Biography. Aurum. p. 61. ISBN 9-781845-135096.
  22. ↑ Bardsley, Gillian (2005). Issigonis: The Official Biography. Icon Books. p. 95. ISBN 9-781840-466874.
  23. 1 2 Wainwright, Martin (2008). Morris Minor: The Biography. Aurum. p. 62. ISBN 9-781845-135096.
  24. ↑ Bardsley, Gillian (2005). Issigonis: The Official Biography. Icon Books. p. 123. ISBN 9-781840-466874.
  25. 1 2 Bardsley, Gillian (2005). Issigonis: The Official Biography. Icon Books. p. 129. ISBN 9-781840-466874.
  26. 1 2 Wainwright, Martin (2008). Morris Minor: The Biography. Aurum. p. 66. ISBN 9-781845-135096.
  27. ↑ Bardsley, Gillian (2005). Issigonis: The Official Biography. Icon Books. p. 128. ISBN 9-781840-466874.
  28. ↑ Wainwright, Martin (2008). Morris Minor: The Biography. Aurum. p. 68. ISBN 9-781845-135096.
  29. ↑ Bardsley, Gillian (2005). Issigonis: The Official Biography. Icon Books. p. 125. ISBN 9-781840-466874.
  30. 1 2 3 4 Barry Anderson, Building Cars in Australia: Morris, Austin, BMC and Leyland 1950–1975, pages 204 to 208
  31. 1 2 http://www.autominded.net/brochure/morris/Morris%201617.jpg
  32. 1 2 3 4 "Morris Minor Four-Door Saloon (road test)". Autocar. 20 October 1950.
  33. ↑ "The Morris Minor tourer". The Motor. 23 August 1950.
  34. 1 2 3 4 5 6 7 8 9 10 Ray Newell, Morris Minor, 60 Years on the Road, pages 106 to 118
  35. ↑ "The Morris Minor Road Test". The Motor. 15 October 1952.
  36. 1 2 Sedgwick, Michael; Gillies, Mark (1994). A-Z of Cars 1945–1970. p. 142.
  37. ↑ "News Summary: Morris Minor Million". Practical Motorist 7 (79): 713. March 1961.
  38. ↑ "News: Last Minor Convertible sold". Motor 3506: 52. 30 August 1969.
  39. ↑ "The cars: BMC 1800/2200 development history". AROnline. 11 April 2012. Retrieved 15 April 2012.
  40. ↑ "The cars: Morris Marina/Ital development history". AROnline. 11 April 2012. Retrieved 15 April 2012.
  41. ↑ "Austin Allegro". AROnline. 11 April 2012. Retrieved 15 April 2012.
  42. ↑ A Cwt was the short-form term for a "hundredweight" which was a pre-metric unit of weight measurement used in Britain, equivalent to about 50 kg. Use of the term in the name of a light commercial vehicle was common in Britain, and indicated the maximum load (by weight) that the van was designed to carry.
  43. ↑ "Morris ¼-ton (O-Type) 1953–1971". www.aronline.co.uk. Retrieved 3 April 2013.
  44. ↑ http://imcdb.org/vehicle_72577-Morris-Minor-1000-ADO59-1967.html. Missing or empty |title= (help)
  45. ↑ http://imcdb.org/vehicle_233292-Morris-Minor-1000-1957.html. Missing or empty |title= (help)
  46. ↑ "2002 BBC article about the company and Morris Minor". BBC News. 19 November 2002. Retrieved 15 April 2012.

Bibliography

External links

Wikimedia Commons has media related to Morris Minor.
This article is issued from Wikipedia - version of the Saturday, May 07, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.